Wow. You said that you only know the basics. That's a blatant lie. Your knowledge in architecture design is extensive. I sincerely appreciate you sharing your knowledge. Keep it up.
@robertclementi93473 жыл бұрын
AS I SAID IN THE PREVIOUS EPISODES VERY COOL.WELL WORTH MY TIME. AND THANKS FOR YOUR TIME AS WELL
@eddievital10053 жыл бұрын
well done , done sharing
@samuellando74583 жыл бұрын
Amazing! I'm thinking of using these house building skills and draw one myself for my dream house for me & my girlfriend!
@TDVision_U3 жыл бұрын
Sounds like a plan to me. 👍
@r.p.85912 жыл бұрын
Sorry I'm bad at KZbin etiquette. Circa 1984 here. I last used AutoCad Architecture 2008, when I got my BS Interior Design (great timing for housing bubble burst). I appreciate all of these reminders of things I use to be able to do. Love your work flow and tone. I subscribed after the third video, and needed to ask my son c.2010 how to watch them in order. Self deprecation aside. Kitchen function NO! I survived Covid-19 so far being a Kitchen designer in a big box store (being reduced down to counting people entering the store and offering masks and sanitizer). Please switch this up so that all cabinets and appliances can open.
@TDVision_U2 жыл бұрын
Thanks for your comment. I agree with you.
@Le_vis254Ай бұрын
I cannot describe how you helped me understand these basics. You are just great
@shakoorah1 Жыл бұрын
Thanks for this informative video. Helpful in my revisions as a graduate and applying for work. Take care
@radarmusic554 жыл бұрын
BRILLIANT ONCE AGAIN FOSTER 🤜🤛👍
@shivlalsingh22443 жыл бұрын
Good. Way of explanation is very nice. Keep it up
@haimel84724 жыл бұрын
Good Job. keep up the good work.
@maxrybold15313 жыл бұрын
Great demo!
@momodoujallow26003 жыл бұрын
great work
@odanehunter64164 жыл бұрын
Great work
@wentleywilliams45693 жыл бұрын
Wonderful, I have learn alot
@aicx404 жыл бұрын
Great . . . love it.
@TDVision_U4 жыл бұрын
Awesome! 👍
@techchanneltv68264 жыл бұрын
Well done again bro!! Very nice!
@chevaughnwalters31274 жыл бұрын
Very informative
@robbiogear5979 ай бұрын
Nice indeed
@hansgraveman93173 жыл бұрын
you canuse R during insertion and B to pick another basepoint during insertion
@TDVision_U3 жыл бұрын
Thanks for the tips bro bro. I'm taking notes of all of them.
@Mr..A.4 ай бұрын
Your videos are amazing and thank you so much for the knowledge shared on your platform. Unfortunately I can't locate the furnishing tab on the metric design catalogue, could I use the imperial for it or it would destroy the whole drawing?
@TDVision_U4 ай бұрын
You can use imperial. If done right, you those blocks will be scaled proportionally to fit in your drawing.
@onokisenseh55282 жыл бұрын
Hey what's good Mr Edwards, do u have a video on how to add schedules(Doors and window) also windows and doors tag along with section lines?
@TDVision_U2 жыл бұрын
I actually do. Check out this video kzbin.info/www/bejne/n3S8iH6fg56nr9U
@onokisenseh55282 жыл бұрын
Ok thanks
@kelvinjohnson19192 жыл бұрын
I’ve been following the tutorials from episode one, it’s very educative. Ma only challenge has to do with the furnishings for the kitchen. I’m using metric cos that’s what we mostly use in ma county. I can’t find the furnishings form the metric design catalog, any help??
@TDVision_U2 жыл бұрын
I'm not sure. I've never really looked into metric and what is available.
@user-rn9el9gz3y Жыл бұрын
HII!! great videos! im lurning a lot. i have the autocad MEP and in the content browser i only have electrical, HVAC, piping and plumbing. i dont have furnishing and others. how do i import furnishing? from where? THANKS!
@spiritgroovesmusic2 жыл бұрын
Hello sir good day. U really are a great teacher. But sir pls I can't find some of the fixtures on in my contents. Any help. I'm using AutoCAD 19
@christabelnartey34899 ай бұрын
Hi, please am j the only one facing this problem, my cabinets dont seem to have drawers, they're just like boxes and plus the look like they're upside down😢. I've tried to rotate it but to no avail. Any help please
@muneeral-busaidi910 Жыл бұрын
Hello! Thank you for sharing your knowledge, I am learning so much. I currently trying to model my house inj AutoCAD. it is a Tri level house and I am not sure how to go about creating the levels and constructs where the elevation will not allow a tri level house concept. any advice?
@chrisosita2713 жыл бұрын
Nice one and great work, please how or where can I get the blocks...?
@TDVision_U3 жыл бұрын
They are included with the software. Make sure you have AutoCAD Architecture.
@dwaynecadguy189710 ай бұрын
what kind of mouse are you using to do your quick 3d rotations?
@TDVision_U10 ай бұрын
I'm using a space mouse
@vuyosigauke3 жыл бұрын
If I'm done in adding each contracts the foundation concrete ,dimensions, roof separately and walls so how best can I combine all constructs ....into a single drawing .
@TDVision_U3 жыл бұрын
Keep following the episodes. Or fast forward to Creating Views: kzbin.info/www/bejne/e3Snc3V-p9Vqqqc
@sharjeelarain47583 жыл бұрын
Nice work.. can we material these fixtures?
@TDVision_U3 жыл бұрын
You can but its kind of tricky. Try this: Explode the fixture only "twice", until it become a regular block. Right click/edit block Highlight elements Assign material. Exploding remove certain features from the fixture tho. This is the only way I figure out how to. If someone else knows a better way, we would love to hear.
@samifoxful4 жыл бұрын
GREAT VID! DO YOU HAVE ANY PLAN TO GO INTO ANNOTATION?
@TDVision_U4 жыл бұрын
Thanks man. Yes I do plan to do annotation.
@Richardo71722 жыл бұрын
Edwards, I added a bathroom fixture and i can see it in the top view however it disappears when i try to view it in 3D. Why is this?
@TDVision_U2 жыл бұрын
I'm not sure why. That never happened to me. Maybe its a graphic issue?
@haoyue49723 жыл бұрын
Is it possible to edit the block from the content browser? I could only change the parameters in the properties but not really edit it to the desired shape that fits the space, any help would be appreciated! Thanks!
@TDVision_U3 жыл бұрын
I'm sure there's a way to do it, but I am not sure of it. The most you can do is to change the X, Y or Z scale factor in the properties to widen or lengthen a peice of furniture.
@haoyue49723 жыл бұрын
@@TDVision_U I am able to open and edit the block with BE shortcut but now the problem is if I make any changes it will automatically save it on the library. I want to modify blocks based on the design but still want the actual block to remain the same.
@TDVision_U3 жыл бұрын
Yea, I've never really modify a default block like these ones. Sometimes it's easier to just model the item from scratch.
@haoyue49723 жыл бұрын
@@TDVision_UFinally I tried to explode the block and modified it, then created a new block adding to my customized palette, so the original one is not affected, works fine for me!
@TDVision_U3 жыл бұрын
Great! I'll have to try that and see.
@ogalabenjaminarome57143 жыл бұрын
hi nice tutorial. pls where can i download the 3d templates
@TDVision_U3 жыл бұрын
For the furniture? These are available in the AutoCAD software.
@anabercaru Жыл бұрын
Can someone please tell me what tool palette is he using and where can I get it?
@TDVision_U Жыл бұрын
Download AutoCAD Architecture
@anabercaru Жыл бұрын
thank you, I already saw your reply to another comment about the blocks, way too expensive I am afraid 😬
@phantasmagoria96813 жыл бұрын
can i get these in autocad architecture 2018?
@TDVision_U3 жыл бұрын
They should be preloaded in there.
@mickeymikiastadesse11193 жыл бұрын
I can't get the Xref palette on the screen. How do I get it?
@TDVision_U3 жыл бұрын
Type the command XREF
@mickeymikiastadesse11193 жыл бұрын
I did. but nothing on the screen
@mickeymikiastadesse11193 жыл бұрын
I can't use it like you're doing.
@TDVision_U3 жыл бұрын
Not sure why you're not seeing it. Maybe its off to the side of your screen or behind another app. It should work.
@oboumoura51303 жыл бұрын
The fridge blocks the cabinets....
@TDVision_U3 жыл бұрын
You're correct. That cabinet would probably be a dummy one, where the door and drawer doesn't open.
@oboumoura51303 жыл бұрын
@@TDVision_U Still a Great Video Keep them coming...
@TDVision_U3 жыл бұрын
Thanks man.
@harisharalabakis23 жыл бұрын
the bathroom is ridiculous why not to put a shower cabinet. This way every time you will have the wet floor!
@TDVision_U3 жыл бұрын
True! Any style you chose can work. In this case, that's what the client wanted 🙂