Flange Mount Pump and Motor Seal Kit Replacement - Henny Penny Fryers

If you are experiencing difficulties in bringing your oil back from the filter pan and have checked that there is little to no suction from the pump, chances are that the pump motor assembly seal kit may need to be replaced.
When the seal kit fails you can notice two main issues: the first one, the oil in the filter pan is not pumped back to the fryvat or it takes a lot longer than what you were used to; the second one, there is an accumulation of oil between the pump and the motor due to a leak in the seal kit.
This video will show how to remove the pump from the motor, the components of the seal kit and how they go together to ensure that its installation is correct.
To find replacement parts, please visit www.hennypennyhelp.com
For further assistance please contact your local Henny Penny distributor www.hennypenny.com/sales-service/distributor-service-locator/ or our Technical Support department at [e-mail]

[@peytonlane6845]

Very informative!

[@HennyPennyService]

Thank you, Peyton.

[@davidflores5761]

Hello What might be the cause of my issue? Motor can't make spin the pump rollers are brand new. It's stuck. I already degrease and clean the pump. Help me, thanks!!!

[@ГерманСерков-ч8ш]

add some oil in pump

[@leilamusa9175]

We have gas Jenny penny computeron 4head and the pump stopped working today. I cannot find the pump reset switch anywhere

[@HennyPennyService]

The video below should help solve your problem. If further assistance is needed, please reach out to our Tech Support team at 1 [phone]. kzbin.info/www/bejne/aXvGkqmwataopZI

[@aneeshp.m5506]

Pls add E 20 B error details

[@HennyPennyService]

For what equipment model? We already a have a couple of videos that cover E-20B error code.

[@aneeshp.m5506]

Henny penny 8000 gas

[@brandonjimenez902]

Who else here works for chick fil a