Ive been using Indian aluminum for yrs, never tried any other but i really like it!
@francismusso7644 Жыл бұрын
The best but still safe mix for the biggest and loudest confined bang is KCLO4 and MgAl with a 50/50 mix by weight. If you can, get at least 1000 mesh or 2000 mesh MgAl. Screen or mix on paper . Screen the Oxidizer separately to get it free flowing so it mixes well with the Mgal. Worked in Fireworks factory for several years. My nickname is old BOOM. 😊😊
@thatoneguy454c9 ай бұрын
If you mix KCLO4 flash powder in the right quantity with extremely fine aluminum and Sulphur it is actually self confining. You can get incredible detonation velocity for a mechanical pyrotechnic mixture.
@patman02508 ай бұрын
Actually you can substitute that perk with potassium nitrate, and instead of mag/al just use mag. 50/50 mix. Whatever makes you make at 10% sulfur and you got a very powerful very safe flash.
@TheMulletMafia16 ай бұрын
Kno3?
@t.g.37856 ай бұрын
33/33/33 for a bigger bang. 70/30 with the right oxidizer beat kclo3 and kclo4. Detonation can’t be achieved with flash powder. For detonation the speeds needs to be 3000m/s.
@unknowndivision1705 ай бұрын
But perchlorate not available on regular shop. Only available for industry. So potassium nitrate still good substitution and far more cheap
@omnisurplus7326Ай бұрын
Thanks your my new tester. Black indian nice with oxidizer 5.1 how bought mixing in titanium powder?
@codm0nsterfan2 ай бұрын
8:22 "Sonofabitch!!" Made me laugh so hard 😂 Love the video I learned a lot 👍
@patman02509 ай бұрын
A lot of people say that Indian blackhead it's much better than the German "super" or whatever you want call it. Looks like there's a new king in town.
@jeremyarnold19797 ай бұрын
It doesn't mix together with kclo4 as good as the 5413 does but it does work as good or better.
@patman02504 ай бұрын
@@jeremyarnold1979 Depends how find your Perk is. My three micron Indian blackhead mixes perfectly. But even then what's a little extra mixing if the performance is much louder.
@jacobsrandomvideochannel45862 жыл бұрын
Here's a suggestion to increase the burn rate even more, you could mill the oxidizer for 24 hours in a very clean ball mill jar and the oxidizer might clump after but you can always screen the oxidizer after milling and this solved the slow flash problem for homemade dark aluminum in my experience and for some reason 5:5 ratio is way faster than 7:3 after milling the oxidizer, and I figured that out by mixing a 1:1 ratio of milled oxidizer and homemade dark aluminum and it went *Thump* like a thump powerful enough to quake a punk stick with only 70-100 milligrams unconfined
@jeremyarnold1979 Жыл бұрын
The oxidizer I use is very fine Chinese kclo4 with anti-cake milling it is not an option with the anticake. It's fine enough for flash powder.
@jacobsrandomvideochannel4586 Жыл бұрын
@@jeremyarnold1979okie
@PyroJovanny912 Жыл бұрын
@@jacobsrandomvideochannel4586haha you suck
@TheFireGoose Жыл бұрын
Those lil cherry bombs where great considering their size
@avenueroo11 ай бұрын
Thank you Jerry, you gave a lot of information in your video.
@asabumanglag710514 күн бұрын
Aluminum black Indian is very good
@jasonboyd57402 ай бұрын
Great video!👍 Do you still mix a 70/30 for the Indian flake?
@codm0nsterfan2 ай бұрын
Thats the right call and usually the mix
@ChaplainDaveSparks9 ай бұрын
Interesting ... I think this is the first time adding *sulfur* to flash powder has been mentioned. Is it supposed to have the same effect as adding it to *_black powder_* does?
@jeremyarnold19797 ай бұрын
Adding sulfur to most compositions lowers the ignition point to make it easier to lite.
@houseoffire722 күн бұрын
@jeremyarnold1979 it also changes the sound of the report to lower boom than a crack.
@mr.kimber443 ай бұрын
I'm a little late to the game. How did you make the cherries?
@jeremyarnold19793 ай бұрын
Bought 1 inch hemispheres from pyro direct and flash powder then sealed with toluene.
@dr.fillyblunt75055 ай бұрын
I've tried the german and indian and I probably wouldnt be able to tell a difference unless I was to do them side by side. I think the indian might be just a hair weaker but that's probably expectation bias on my end due to it being cheaper. My main gripe is with how hygeoscopic the oxidizer is. I can screen it as many times as I want but once it's mixed it balls up and I jave a bunch of clumps of oxidizer in my comp. I wonder if it's enough to throw off the ratio.
@asabumanglag710514 күн бұрын
Where did you get these at
@jeremyarnold197914 күн бұрын
Get what at?
@JohnSmith-bj8gw2 жыл бұрын
Great video! Whats in the homemade stuff if i may ask?
@jeremyarnold19792 жыл бұрын
Ball milled cheap aluminum foil that was ran thru paper shredder then a coffee grinder then added 95% aluminum to 5% willow or balsa charcoal ball milled for 5 days opening the mill jar twice a day to let air in.
@JohnSmith-bj8gw2 жыл бұрын
@@jeremyarnold1979 thanks sir! And those little cherry bomb shells? How do they hold together are they glued?
@jeremyarnold1979 Жыл бұрын
Yep, they are melted together using toluene.
@jeremyarnold1979 Жыл бұрын
I have replaced the willow/balsa with eastern red cedar and works just as good and is cheaper to make.
@gyro70712 жыл бұрын
Blue aluminum has to be mixed just right and confined into a closed no air container..
@jeremyarnold19792 жыл бұрын
Yup that's what iv learned lol.thanks for the reply
@bossbiking22 Жыл бұрын
Where did you get the plastic casings?
@jeremyarnold19799 ай бұрын
Pyrocreations.com
@raindrop80618 ай бұрын
@@jeremyarnold1979 Just ordered them off that website thanks
@jimmysrandomness2 жыл бұрын
The indian confinded wat was de oxider kno3 or kclo4?
@jeremyarnold19792 жыл бұрын
Kclo4
@brianrosales90093 жыл бұрын
Thanks this helped a lot keep the good work up man
@jeremyarnold19792 жыл бұрын
Welcome.
@godofexplosives Жыл бұрын
#JeremyArnold what aluminium powder did you use in the potassium nitrate sulfur one because im from Australia the only aluminium powder I can get my hands on is normal aluminium powder 200 mesh. I have not tried it yet but on a small budget so I don't what to buy it and it does not go boom thank you travis.
@jeremyarnold1979 Жыл бұрын
I just received a batch of chems and ordered in a pound of 200 mesh so I can try it for myself and will let you no.
@OhnoAnt Жыл бұрын
@@jeremyarnold1979 How did it go?
@jeremyarnold1979 Жыл бұрын
The 200 mesh aluminum was a slower flash power unconfined but worked OK confined. Not as powerful as 3 micron aluminum but will work in a pinch I'll do a video once I get to it. Thanks
@OhnoAnt Жыл бұрын
@@jeremyarnold1979 a lot of the firecrackers I make with it have it all spit out the top in the video can you show how you make it well confined.
@OhnoAnt Жыл бұрын
When you're going to make how much grams for sulfur, that new aluminum powder and potassium nitrate are you going to use?
@yhzhan91592 жыл бұрын
Do they make a big difference when confined?
@Smokin_skies2 жыл бұрын
Ummm yeah. When it's confined it forces it to create alot of pressure to escape. If that dude would have used the same amount of powder he was testing in a tube, it would have been one hell of a bang.
@jeremyarnold1979 Жыл бұрын
Yep confined it works really good above 10grams.
@3ccdmike6 ай бұрын
Nice work. I am your 120th sub.
@jeremyarnold19793 ай бұрын
Thank you.
@Ovation362 жыл бұрын
The company that you ordered the powders from that's based in Georgia have you had any issues with them giving your information to say law enforcement?
@jeremyarnold19792 жыл бұрын
I don't do anything illegal with my chemicals but small fireworks so it doesn't matter if they no or not. They can show up anytime they want for a surprise inspection doesn't matter to me. But to answer your question not that I no about.
@Ovation362 жыл бұрын
@@jeremyarnold1979 same here for informational purposes only. I don't think being in possession with the separate chemicals is illegal.
@chemistryofquestionablequa62527 ай бұрын
@@Ovation36it’s perfectly legal as long as you aren’t storing, transporting or selling any mixed flash or fireworks.
@jeremyarnold19795 ай бұрын
Yep.
@jonathanleon6615 Жыл бұрын
Why is my FP so slow is it because of old kno3?
@jeremyarnold1979 Жыл бұрын
Could be unsure, or not milled fine enough or bad aluminum. Could be a mix of both.
@jeremyarnold1979 Жыл бұрын
Un pure not unsure lol. Dang spell check.
@jayblackDAHOOLIGANpYRo Жыл бұрын
Have u ever heard of eckart 120 aluminum
@jeremyarnold19799 ай бұрын
Yep
@aspect2756 Жыл бұрын
What do you guys think is the most stable form of flash powder?
@godofexplosives Жыл бұрын
what aluminium powder did he use in the potassium nitrate sulfur one because im from Australia the only aluminium powder I can get my hands on is normal aluminium powder 200 mesh. I have not tried it yet but on a small budget so I don't what to buy it and it does not go boom thank you travis.
@jeremyarnold1979 Жыл бұрын
I just responded on the time fuse one, good luck.
@jeremyarnold1979 Жыл бұрын
On the nitrate flash I use ball milled potassium nitrate eckart 5413 3 micron and rubber makers sulfur.
@jeremyarnold1979 Жыл бұрын
I have also used my homemade aluminum powder which is 95% aluminum foil and 5% carbon (eastern red cedar) and have had success. BUT I have lost more to spontaneous combustion than iv been able to keep. After the 48 hour mark of ball milling the jar needs to be opened atleast twice a day, at least. Wouldn't hurt to open the jar 4 or 5 times a day to let oxygen in and give the media time to cool a bit.
@jeremyarnold1979 Жыл бұрын
Regular flash at 7/3 kclo4/al This is the industry standard. Once confined in a shell it's as safe as any other composition we use.
@henryk405 Жыл бұрын
What type of kclo4 do you use. does it have anticake?
@jeremyarnold1979 Жыл бұрын
325 Chinese w/anticake
@TheKing-cl1sh Жыл бұрын
Where did you get the German dark pyro aluminium powder?
@jeremyarnold1979 Жыл бұрын
HCS Supply .com
@avenueroo11 ай бұрын
Please check the address, nothing coming up fireworks related, thanx. @@jeremyarnold1979
@jeremyarnold19799 ай бұрын
It came rite up for me. HOBBY CHEMICAL SUPPLY
@bossbiking Жыл бұрын
Where did you get the plastic shells
@jeremyarnold1979 Жыл бұрын
Online pyro.com
@thomasmaisonet3012 жыл бұрын
Mix find magnesium with the blue aluminum 50/50 then it should work nicely
@taylormarks31382 жыл бұрын
Where did you get those cherry molds
@jeremyarnold19792 жыл бұрын
online pyro.com
@Idrinklight443 ай бұрын
Put your fuse and powder in wrong positions, put tape at end of fuse with powder right before it
@mrnk852 жыл бұрын
Bro next time tape about 3/4 of the fuse then lay the compound on top of the taped fuse.
@jeremyarnold19792 жыл бұрын
Yep for sure lol .
@gyro70712 жыл бұрын
To make blackhead aluminum all you had to do is ball mill Willow charcoal make sure it's Willow then you mix it 50/50 or 3050 30 Willow 50 aluminum make sure you Mill it for about 7 days each not together make sure you breathe the aluminum out of the ball mill so it don't explode or combust
@jeremyarnold19792 жыл бұрын
Not from my experience it's more like 95/5 to 90/10 and the 10 is way to much charcoal
@gyro70712 жыл бұрын
And all your mixtures are going to deviant between your flash powders potassium perchlorate 70/30
@Tungoon7 ай бұрын
Blue needs a catalyst like a touch of sulfur
@mattgoupil22242 жыл бұрын
Well, I don't think we have to worry about your 4th test with blue being unstable.
@jeremyarnold19792 жыл бұрын
It is different than what I'm used to but it does work.
@jonwolfford06019 ай бұрын
53% kno3 33% Al 14% S make your kno3 way finer and use 5 micron Al
@gyro70712 жыл бұрын
And there are other flash powders but I'm not going to get into the detail because they are more of volatile
@jeremyarnold19792 жыл бұрын
Yes I have 18 different types that I use. Some leave a dark black cloud and some leaves a grey cloud and iv got 2 types that are dark salutes that can't be seen.😉
@rubs44438 ай бұрын
please the best for firecrakers
@jeremyarnold19795 ай бұрын
Standard 70/30 kclo4/al works perfectly
@rubs44435 ай бұрын
@@jeremyarnold1979 thanks
@MT-in3tp3 жыл бұрын
homemade was respectable too
@jeremyarnold19792 жыл бұрын
yup it was. thanks
@jason88218 ай бұрын
Ok so im not hating but a few things I must say about this video that I have to say because people imitate what they see and a couple things he did where extremely dangerous. First never stand that close even with unconfined because certain mixtures can act completely differently and 10 grams of unconfind will detonate like a high explosive. ALSO DONT BE SMOKING A CIGARETTE ESPECIALLY OVER 5 EXPLOSIVES (yes we all saw your ash fall) but the biggest "DONT DO" is when lightning them off do not use a bic lighter or light it in your hand because you could very easily left residue on the Fuze then go to light it and BOOM no more fingers! Also the same goes for placing one in the same spot you just lit one off at for the same reason, one amber then all of a sudden no more fingers. The propane touch was the way to go and the fuzes where even better or anything that keeps you and your fingers away from it. Flash will always catch you by surprise, I know from experience so please all be safe! I've seen 1 gram of unconfind punch a hole through a metal Petri dish and made a 7 inch Circle of grass just disappear so now imagine that but with ten grams and your standing 4 feet away. Hope this helps and have fun blowing shit up lol
@Idrinklight443 ай бұрын
I do like the safety of the blue
@madmattdigs95185 ай бұрын
I like Magnesium and persulfate
@maxbuust86709 ай бұрын
Blue al tekee syvän basso äänen kun saat sen toimimaan.
@gyro70712 жыл бұрын
I used to be a pyrotechnician
@KENG-o9f Жыл бұрын
Fuse flying hahaha😂
@gyro70712 жыл бұрын
👍
@Aaron-zu3xn6 ай бұрын
if you really wanna test your ball milled aluminium add it to nitromethane
@Kirt442 жыл бұрын
The german is the one u want its defently the fastest
@jeremyarnold19792 жыл бұрын
Not in this test the Indian was faster and had a louder pop to it than the German. I'm using Indian in everything now.
@TheeThunderGod2 жыл бұрын
Indian is faster, especially if its the 2 micron Indian. I have alot of it.
@TheeThunderGod Жыл бұрын
@@jeremyarnold1979 Indian gives u the best balance of bass, power, and sound/pressure output. There's a 3 micron atomized that hits HARD af too! I guess people avoid it cuz its atomized but its a lil more expensive for a reason, the shyt puts out a crazy pressure wave. I only see a couple KZbin vids of people using it im guessing cuz nobody knows that 3 micron atomized works tremendously in salutes. It was actually the 1st Aluminum i ever worked with.
@TheeThunderGod Жыл бұрын
Hansen, German aint the fastest. 2 micron Indian is. Almost all Indian is faster. But i dont use cab-o-sil cut Chinese kclo4, i use High Purity only. No cheap chems this way.
@jeremyarnold1979 Жыл бұрын
In my personal testing, the 325 w/anticake compared to high purity kclo4 the wad no distinction between the 2. So I use anticake for ease of mixing. The high purity seems to clump and needs screened before mixing. Using the Chinese stuff rite out the bag and aluminum out the bag straight to mixing.
@gyro70712 жыл бұрын
Potassium chlorate 70/30
@jeremyarnold19792 жыл бұрын
Don't like the chlorate the kclo4 is louder anyways in my testing
@gyro70712 жыл бұрын
Sodium nitrate 6020
@Xray0311 ай бұрын
?
@gyro70712 жыл бұрын
Ammonia nitrate 4030
@Xray0311 ай бұрын
tf u talkin ab
@justlame63632 жыл бұрын
Blue al works only with potassium chlorate
@TheeThunderGod2 жыл бұрын
Not true at all my guy.
@TheeThunderGod2 жыл бұрын
Potassium chlorate actually makes any mix a lil less stable and more sensitive. We stay away from it. Its less stable, more sensitive but, performance is lower than perchlorate.
@jeremyarnold19792 жыл бұрын
Not true, i figured it out. i was using pure blue al and kclo4 un confined but larger quanities of that mix was awesome, more than 10 grams works awesome.
@mrnk852 жыл бұрын
@@jeremyarnold1979 can you demo please I'd like to see it in action.
@jeremyarnold19792 жыл бұрын
I sure can I'll make one on video and sho what it can do. Give me a week or so
@An-fm2vm11 ай бұрын
🤣🤣💣✖️🤣
@yancahya21432 жыл бұрын
Funny fuse. Or u
@jeremyarnold19792 жыл бұрын
Huh?? The fuse is greenn24-30 seconds a foot. Cannon fuse. Or safety fuse.