Flashforge Creator 3. Industrial IDEX Printer.

[@krisgee1154]

Is there no end to this mans talents! Musical accompaniment to a normal sound video🤗🤗🤗

[@drxym]

Probably the best use for dual extruder is to load one with water soluble filament to print supports and then the other with the regular filament. Then you can just drop the thing in water and the supports dissolve.

[@myfordboy]

I have some to try.

[@Pustoychelovek]

Congratulations on your acquisition of a great tool.... A little music at the end of the video is very useful, and is needed to consolidate the information shown :-)

[@vincit1813]

Nice to see the ML10 in action again, you could have some fun with that Octopus, dragging it along a beach with a piece of string, scare the crap out of the sunbathers lol

[@richardwillcox4097]

Impressive piece of kit

[@ProjectDIYOz]

Very nice, I have the exact same one. You're going to love it, please the dual extruders are an awesome feature.

[@myfordboy]

I am very pleased with it. Prints are superb.

[@peterguy2582]

I have a Flashforge Guider 2, which I am using to develop a product invention, so this video is interesting from a fellow Flashforge owner point of view.

[@myfordboy]

I love the printer and Flashprint slicer is very easy to use.

[@arturomendez7945]

Same printer here. Dual and mirror mode are awesome ans so useful. However Extrusion of left extruder is little smaller than right one. Is there any way to change left extruder steps with M92 Exxx Tx? Usually I get such values with ProntFace other printers has 100 steps on X,Y and E while Z is 400. But this printer does not have serial port. I like to know how many steps are for extruder stepper motors (100, 200, or 400, ... steps) and which T is left extruder. (T0 or T1). Any idea?

[@myfordboy]

Sorry I do not know the answer. Have you asked flashforge or asked on the forum?

[@alexchliwnyj5941]

Is this the model with a single fan for cooling the both the hot end and the print too? I was wondering how that works if you need to turn down the print cooling for some materials like ABS. Does the hot end overheat? A single fan seems like an unusual design decision for an industrial machine that has a hot end capable of printing high temperature materials.

[@myfordboy]

Yes there is a single fan and everything seems to print well. The extruder design is different fro i=other printers.

[@TheMadJoker87]

i mean, it looks really nice and well built, but my 200 dollars anet a8 does basically the same job with the same print quality. the extra printing head might be useful for very specific applications, but that, the lcd screen, camera and few other commodities dont justify the u$s 3.2k price tag

[@GodzillaGoesGaga]

2 ENDER3's for about $360 is a way cheaper option.

[@iteerrex8166]

I'm telling you he is a former MI6 member. He is still under oath to stay anonymous.

[@silasmarner7586]

The first closeup of the left 3/4 view of Myfordboy's head... ever????

[@dalecollison791]

How is the printer going now? Are your two nozzles the same height? I have been told I have to shim the left one as they are not the same. This cost $4000 in Australia and I have had to work on this printer more than any other I have owned.

[@myfordboy]

I am delighted with mine. I have other printers but I have not used them since getting this one. I have had not any reason to check it out as I have no problems but is there not a setting "Expert mode Z calibration that covers this"

[@PooBah]

I have the same printer. Also in Oz (cost me $3200 at 3d printers online, they since bumped up to $3700). I haven't had to make any changes it just worked out of the box from day one.

[@jamesmyers2087]

1:05 it wants out of the box!

[@willywgb]

Hi David How long did the 2 Color octopus and black Alien take to print? Cheers Willy

[@myfordboy]

I don't check on the time but i remember the Alien was 36 hours and probably 24 for the octopus.

[@bryphi77]

I really liked this channel better when you weren't a shill.

[@65cj55]

Maybe your opinion doesn't matter......just a thought.

[@bryphi77]

@@65cj55 well then maybe he should close the comments...

[@65cj55]

@@bryphi77 Nah, why should all the decent and respectful people not be able to comment ?

[@bryphi77]

@@tcarney57 lol... like the nazi's. I know... reality and other people's opinions are real tough to handle for cattle. Funny... looking through the comments here.... seems that the opinion you are scared of is the most popular.... people like you are what is wrong with society. So funny that my honest opinion has drove you to censorship. Cattle are pitiful...

[@IndyRockStar]

what do you think about using casting wax resin in the AnyCubic Mono X for lost wax casting?

[@myfordboy]

I have used the Anycubic castable resin for lost wax type casting. kzbin.info/www/bejne/m6DXcpaYmpp7oJI

[@Bobs1Models]

Nice printer at a nice price ;);)

[@janosnagyj.9540]

3:18 I was like: "f*ck, my monitor starts to die just now!" then I saw the reason... Hiding Boy caused a little heart attack to me with this effect :)

[@myfordboy]

Got to keep the mystery going.

[@mechniack]

Yeah China owns you , their secret agent.

[@chrisleech1565]

The price seems commensurate with features. But it doesn't have a heated enclosure. $3199

[@runesvensson1244]

Is it just as noisy as other Flashforge printers? :-)

[@myfordboy]

It's not quiet with all those fans but it is an industrial machine.

[@runesvensson1244]

@@myfordboy Is it easy to repair? My Flashforge Inventor is a bit complicated to fix, because the extruder assembly is very compact. I'm looking to get a Creator 3.

[@myfordboy]

@@runesvensson1244 I have not needed any repais but it would be more difficult than anOpen type printer. The extruders are different and use only one fan.

[@stephenperry5849]

Did we get a glimpse of the man behind the camera? Is the driver a self portrait 🤔!

[@myfordboy]

Sadly not.

[@markchriestenson3257]

No, his hair is gray not brown.

[@mechniack]

Yeah ! But can it print metal's. ? 🤔

[@joeyvanrenesse884]

No.

[@mechniack]

Just it cheap enough we betray ourselves, and each other, when we go under don't complain

[@zedwizz]

Hope they let you keep it :)

[@ismailaricioglu]

Harika.

[@ParsMaker]

legend :)

[@a5248714]

不错

[@thetrevor861]

Ummm, 'scuse me... 17:52 " /Wood/" . . . I am not sure that was made plain in the video.

[@RicusiowoPL]

This printer is very noisy.

[@myfordboy]

This is an industrial printer so the noise level is not as important as a consumer product you might have inside your house. The camera mic does make it sound louder than it actualy is. There are extractor fans and hep filters built into the enclosure.

[@mechniack]

Another Chinese plastic printer 😦 how dependent we are on China it's truly disgusting