Flashforge Must Prints!! (7 Things You Need to Print on Your Flashforge Adventurer 5M)

Рет қаралды 14,494

Күн бұрын

Пікірлер: 50

@PrimePicksel 4 күн бұрын

Just bought mine for Black Friday. Its great so far. this helped a lot especially with the spool holder. that oem one sucks lol

@LT3D_YT 4 күн бұрын

Fantastic to hear!

@elijahelie7545 Күн бұрын

I bought mine ah week ago blown away for the price i got itbat

@pacificcoastminiatures 7 ай бұрын

Great ideas! I went for the side-mounted spool holder as I'm short and my printer is sitting on a stand. Easy to access. I might lengthen the Bowden tube that goes into the runout sensor so that the filament doesn't have to go around the corner of the printer. Haven't needed a scraper yet as I find the flexible build plate is great for getting prints off (or if I can wait long enough the plate will cool down and the prints just slide off). For my tools I wanted them more accessible so printed out a mini multiboard and screwed that to the side of my printer stand. I definitely want to print out the cable chain, but first want to decide what colour I want my enclosure to be when I one day print it. And the stylus might be handy as I find the screen touch sensitivity to be a bit slow in registering my finger presses. Hope you're enjoying the 5M as much as I am. Always looking for neater things to print!

@LT3D_YT 7 ай бұрын

I'm very happy with it when it's working, however these new firmware updates seem to be a little buggy. I printed my cable chain in purple as I plan on printing a purple enclosure for mine, gotta match the colours!

@lgthouskpr 7 күн бұрын

What screws are used to mount the Top Spool Holder?

@LT3D_YT 6 күн бұрын

@@lgthouskpr I used the screws that locked the build platform in place which you remove when you unbox it.

@AR-mf9qg 6 ай бұрын

Good content keep the 5m stuff going subbed !

@LT3D_YT 6 ай бұрын

Appreciate it and will do! Currently got another two I’m editing at the moment 😁

@HarleyMan-u3w 3 ай бұрын

Hi LT3D. I have a question regarding the tool holder. I printed everything however I'm not sure what hardware I am supposed to use for the hinges and the latches. Can you enlighten me? Much appriciated.

@LT3D_YT 3 ай бұрын

The hinges and latches require 6x M3x30mm screws.

@HarleyMan-u3w 3 ай бұрын

@@LT3D_YT Thank you so much for the very quick reply!

@LT3D_YT 3 ай бұрын

@@HarleyMan-u3w no worries!

@techsinthecity4459 3 ай бұрын

Awesome Bro thanks... damn wheres that dragon at...

@Bep_VR 3 ай бұрын

What's the app you use to get different/cooler things to print??

@LT3D_YT 3 ай бұрын

I find all my files through makerworld.com, printables.com and thingiverse.com

@Bep_VR 3 ай бұрын

@@LT3D_YT thankyou

@LT3D_YT 3 ай бұрын

@@Bep_VR no worries!

@NasiLemakTech 7 ай бұрын

Ayyy these are good tips. Subscribed!

@LT3D_YT 7 ай бұрын

Thank you so much 💜

@rasskazovo 10 күн бұрын

Do you have stylus stl file. Couse yours for PLA and I want it with Pedg

@JamesLeigh28 6 ай бұрын

During the build of the nozzle box, what is that purple in the front? Is that a camera holder?

@LT3D_YT 6 ай бұрын

Correct, I was testing a webcam to see if it worked. Result is, it does but I definitely need to design something better as it’s currently held on with cable ties 😂

@JamesLeigh28 6 ай бұрын

@@LT3D_YT gotcha, thanks for the reply! I'm still new to the end printing world, and haven't quite pulled the trigger on getting this machine, but I'm really close, so I've been watching a ton of videos on it, lol

@petergg3 2 ай бұрын

Thank you , I just got my first 3d printer flashforge adventure 5 , I can print from flash print it finds my printer with no issue, my printer is configured with a static IP address via hard wire RJ45 connection. I can login to my account on orca flash It connected a couple if times but now it just displays server connection issue.. I am able to It profesional , firewall is fine it’s on a private network , it’s trusted device .I can ping the printer . It just won’t connect

@LT3D_YT 2 ай бұрын

Flashforge’s servers aren’t the best and at the moment they seem to go down at least once as week, which may explain the server connection issue.

@christopherlyons7613 Ай бұрын

What are your recommended filaments for these prints?

@LT3D_YT Ай бұрын

Honestly PLA or PETG are completely fine. I usually stick to 3 brands, Bambu Lab, Polymaker & Flashforge as I have had no issues printing these filaments on multiple different printers.

@sonic_mvp_5112 6 ай бұрын

Which nozzle did you use for these?

@LT3D_YT 6 ай бұрын

The default 0.4mm Nozzle

@rpentinmaki 3 ай бұрын

any chance you know what type of screw you used to install the spool holder?

@LT3D_YT 2 ай бұрын

If I remember correctly I used one of the screws that was used to lock the printbed in place when I unboxed it.

@brianredmond7891 15 күн бұрын

I get an error when trying to load the top spool holder 3mf into Flash Print.

@LT3D_YT 15 күн бұрын

As far as I’m aware the .3mf format is not compatible with FlashPrint. You will need to use either OrcaSlicer or Orca-Flashforge to open the file.

@paulinecarris773 3 ай бұрын

hey is anyone else having trouble with the top spool holder file ?

@LT3D_YT 3 ай бұрын

What sort of troubles are you having?

@TheeGr8Brandin0 Ай бұрын

Yes. The top spool print ITSELF is fine. However the power cable to the sensor is not long enough to reach and screw and I also don't have the cutout on the sensor that was in their installation video on FB. I took the panel off to see if I can get a bit more length but I've got all the length there is. I'm currently printing the whole enclosure this weekend. Just gonna deal with the rear mount till this is done

@joshuachan4598 18 күн бұрын

For the hex scraper, I kept getting stuck in the very beginning. For some reasons progress would jump really quickly to 45% and stops there, anyone experiencing the same thing?