Flat-Moulding and Casting the Infected Knee Tutorial | Freakmo and Powdah Collab

[@OliviaRussellMUA]

This is how we make flat pieces professionally like we learn at my university! I love it :) x

[@Amanda-ly5cn]

I've been looking for a video that goes this in depth for making flat moulds for what feels like months! I can't wait to give it a go now.

[@Freakmo]

I'm heading to Sydney tomorrow for a KZbin event, then visiting my bb Powdah in Melbourne on the way home. I will be back in Perth on Monday, and the next video in the series shall be up a couple of days after that :)

[@atomicpudding6482]

wish you a safe trip 😊

[@mollyfoy655]

pardon my asking but i was wondering aprox. how much 2 pounds of the silicone is (because it is sold in pounds which im not sure about

[@sarahanderson2268]

I love the tip about using a heat gun between layers! It would definitely speed up the process.

[@carolina_di_biase]

Thank you for making this video. I was searching for a detailed video, who describes the prosthetics making process. So thank you so much again ♥️.

[@TigerFXde]

Nice video! I personally love flat moulds and cap plastic!

[@rebeccagifford7632]

I love these step-by-step tutorials

[@kirstyfeehan5443]

Why do you specifically use epoxy parafilm release before spraying the cap plastic on? And is there another option you could use in that step? What will happen if I don't do it at all? Thanks! Amazing results!! :D

[@faitherin2084]

Thank you for this video! you explained everything so well and your work is inspiring me to do my own SFX. But i have a question..... for alcohol activated paints, which do you prefer. Skin Illustrator or European Body????

[@convolution223]

Very nice tutorial! I want to try this now! Thanks!

[@Bangie.]

Hi Miss. I really love your videos. Please I Would like to ask, Can I encapsulate a gelatin prosthetic with cap plastic?

[@kirpnat9076]

I wonder the same

[@billputt1372]

does it have to be Platsil Gel 10 Silicone? are there other products that will do? it looks like it's only sold in very large quantities. thanks.

[@vickkifoxx]

Very well done! Bravo! Thank you for sharing!!!

[@301samdude]

Great Work! You should do The Joker's scars from The Dark Knight

[@jasmineross2478]

You're so talented!! This is amazing my inspiration!

[@strayzar]

i'm sorry this is years late but i just started mould making. what is the crystal clear exactly? what's the brand name?

[@kellianndeville4245]

when putting on the cap plastic are you using the same compressor you use for makeup but a different airbrush and hose? or just a different airbrush? and did you use that same one when painting the arm prop? was also wondering what airbrush you are using and if it comes with that reservoir?

[@adamesposito1137]

What would you use to blend A silicone prosthetic on the skin to match the skin colour?

[@battiey]

How do you clean out your airbrush after spraying the cap plastic through it?

[@SuperHowyalikemenow]

So great!!!

[@tamara-leeparker1409]

Hi Freakmo... I'd like to begin sculpting, what would a beginner need in their kit?

[@MohitDhiman-j2w]

Can you suggest me any academy or institute to learn sfx makeup in Australia??

[@tiahleecookie5814]

does anyone know where i can buy prosthetic's online? also when are you next coming to Sydney your such an inspiration to me and i would love to meet you!

[@дмитрийвилков-н9с]

Amazing!

[@alexolinel_mua5133]

Where can I buy cap plastics in Indonesia?

[@TiffanyNbeauty]

Love the video :) What would be something I could use in place of the pinksil for my mould, as I can't figure out how to get it in the USA?

[@maysmonsters4333]

I use something called Body Double, there's a shop called The Engineer Guy in Atlanta but I'm almost certain they can ship anywhere in the US. They have other silicone molds too.

[@bekkalitzner7227]

Tiffany N Smooth on makes a product called body double Or go to brickintheyard.com And they sell silicone with a pink catalyst its relatively cheap and it works same

[@EgoRot]

I adore your videos!!😻😻

[@riley6267]

Do you reuse the clay after you finish a sculpt?

[@iamgulnazzzz]

Hi? Is this latex piece?

[@kaykay1234512010]

is it imperative to use a epoxy release spray or can you use a universal mould release?

[@kirpnat9076]

If you already know the answer could you tell me? 😪

[@raymanning9903]

how difficult is it to clean your airbrush after using cap plastic?

[@christopherdanko4145]

this is my asmr still in 2021

[@beckybish1]

Hi, how many layers did you do of the cap plastic?

[@filiphalo]

I like your work and your videos. I wanted to ask you if you have tried super baldiez spray yet. I am trying some different techniques for the silicone molds and that spray looks like a good solution if it works the same way as the liquid one.

[@bekkalitzner7227]

Filip Halo I have used it but it wastes a lot of product I prefer the brush on method

[@marionjoseph3879]

I did a silicon prostethic as shown on the video but the flashing is going away when I remove the prostethic from the mold... any advices??

[@rubenschonkeren380]

I love your videos😍😍

[@jershaus]

Do you sell these appliances on ebay?

[@mjdubarr]

Very helpful thank you!

[@fl4rg131]

did she drop q tips in the silicon???

[@maxxam1a]

Hey Freakmo, just wondering, what is cap plastic and where can i buy it in the states? also, would painting the silicone with liquid latex and then removing that work as a substitute? thanks!

[@bekkalitzner7227]

maxxam1a Cap plastic is a vinyl material used to dissolve silicone into your skin it can be purchased at frendsbeauty.com or fxwarehouse.com And the whole point of using silicone is it has the translucency of skin, moves and feels like skin.. It would defeat the purpose to put silicone on top of your silicone Also you can't use silicone while it's curing anywhere near latex because then it won't cure ever and you wasted material It you want use grease paints thinned with some 70% alcohol and it gives same effect as the alcohol activated paints it just doesn't have the same longevity

[@bekkalitzner7227]

*To put latex on top of your silicone*

[@harrishouseofhorror4674]

Question; is this a good cap plastic to use for this?Mouldlife BALDIEZ CAP PLASTIC

[@bekkalitzner7227]

Harris House of Horror It’s the cap plastic she uses

[@isaaccurrivan7695]

Can you put the cat plastic on after the silicone is out of the mold?

[@bekkalitzner7227]

Isaac Currivan No it needs that border to extend from your piece because that is what will blend your piece go your skin

[@conorbyrne4030]

did she really stick that thick thing on her knee

[@brodydemoya5403]

does anyone know what you can use instead of a respirator?

[@kenzieloui]

Where can I buy Naptha from in Australia?

[@bekkalitzner7227]

kenzieloui It's a product call shelite or something like that It's a paint thinner

[@bonnie7721]

Random question: Did this make anyone think of Face Off?

[@poppyfenton8221]

Does anyone know if you always have to add 100% of deadner to the mix or can you do less if you want your prosthetic to be firmer?

[@bekkalitzner7227]

Poppy Fenton All depends on how soft you want your silicone to be If I want it more dead I don’t add deadener If I want real live skin feel I deaden it 100% But I use dragon skin by smooth-on and I don’t have to deaden my silicone

[@coreydeslage944]

Hey

[@atomicpudding6482]

love it

[@zarvibes]

These products are so expensive 😩

[@littlebiginventor8101]

How can you paint cap plastic with alcohol based paint isn't it gonna dissolve

[@jemka9644]

Little Big Inventor the pigment stays only the alcohol leaves

[@bekkalitzner7227]

Little Big Inventor The cap plastic is basically just there to dissolve the edges to be smooth and you have to put some pressure down to actually dissolve the plastic

[@abbiel9866]

i love you ♥

[@ramezwaheed5854]

Why did you add super Baldiez

[@LiviJayneee]

Yassss hahaha 👏🏼💁🏼

[@GrimFelArt]

Could I just use liquid latex for this? Instead of silicone? I'm sure you know real well how expensive silicone is here in Aus LOL

[@jershaus]

Whos the super hairy bloke