Flatbed Gets Milled Lumber & Custom Exhaust Headache Rack!

[@joelclancy3776]

Rich a year ago: It's a budget build! Rich today: Compound Garrett turbos!

[@YusssoM]

If it's not a compound Garrett turbo, you're not rich!

[@builtbyme]

Why does Rich not have a million subscribers yet? He has the best content, the best sponsors, great people behind him. It just dont make sense. He does way better videos then some of these creators with over a million. We need to get him there however possible.

[@DEBOSSGARAGE]

The algorithm doesn't like us. Not sure why

[@corners3608]

I love this build! You hardly ever see old heavy Dodge trucks anymore and NEVER a Fargo! Cheers Rich!

[@DEBOSSGARAGE]

She's a rare bird!

[@Steve-od2di]

When I was a kid, my dad had a half ton Fargo truck. The paint was bad, so off to home store and bought some hose paint in horrendous mint green. It got painted with a roller. The top half of the cab was painted white. The paint job came out fairly well My dad used that truck for about 10 years getting wood and chores before selling it.

[@giggitygiggitygoofg6069]

You should look at putting 12 volt solar panels on all your trucks to keep all the batteries topped up especially as you've got too many truck for you to drive them everyday. I see a collaboration in your future with a solar panel maker. .nice work as usual Rich

[@wobblysauce]

For most projects, it is just the little phantom drains, so the panels don't need to be huge.

[@derekkapaun5610]

Hey dude sweet im a old retired trucker i love the sick look sweet🎉🎉

[@zall1321]

"I think I can get it right the first time on the second one doing it the fourth time. I'm stealing this for work. (Electrician)

[@ja-bv3lq]

Great looking rig, Rich!!!

[@thetrainshop]

I did a remote battery setup for my air compressor rack I CADded up for train horn bullshit. I used a trailer battery charging solution that will kick on when charging voltage is detected and circuit is complete through a forklift charger plug setup. Works great to keep that remote battery charged without it being permanently wired to the rest of the truck.

[@CarswithNash]

Good progress Rich!👍

[@kennyspry5189]

Damn awesome You are getting so awesome on the Welds they look absolutely amazing great Job.

[@mattzembower2042]

Love your enthusiasm, never short on content, happy wrenching !!

[@DEBOSSGARAGE]

Thanks man

[@rachelbrinkley3240]

AS a Canadian it is nice to see an Canadian fixing up an old Canadian Truck

[@charlescarpenter1330]

This could bring your channel into another level please give us constant updates im here for it

[@monkehbitch]

Ai bot?

[@misc_]

24:57 omg the kitty sounds soo good! 😭😭

[@Rick-O-Shay60]

More, More, More. Can't get enough of this cool Fargo build. Thanks Rich. This is going to be an Awesome truck bud.

[@NickManCuso59]

Hey Rich so far you've done an amazing job on this build. I cant wait to see it completely finished !

[@mwaynem]

You are an artists. I really like your mobile sculptures. Your outside the box creations are amazing.

[@mrricky3816]

Thanks!

[@dwaynebeetge1616]

Can't wait to hear it run with the smoke stacks 👌🏼👍🏼💪🏼

[@danielbuck]

such a rad looking truck! thanks for sharing, that's alot of hard work so far!

[@307Garage]

Love this truck!

[@madcat4563]

As someone from the Southern hemisphere, I can't wait for "winter".

[@jamesseidl3661]

Cant tell you how cool it is to see you drop 2000lbs of grimy "scrap iron" into the the bed of your shiny restored custom truck and use it the way it was meant to be used rather than what most people do and go get a beater "shop truck" instead

[@rickhay9782]

Love that Kitty powered Ford...it should do a cameo or photo bomb in every video Rich 😊

[@yous3433]

Try connecting the battery with an anderson leads maybe for the bed Edit: looked around as said below,take power from the alternator, anderson leads to battery for quick disconnects, and a battery isolator for when the engine is off, or just disconnect battery, since the batteries if not connected directly will drain from each other and kill each other (especially if different capacities) but should be totally doable

[@000622477]

Maybe for the alternator instead

[@mutantryeff]

Amazing truck

[@georgemain889]

You should use some of that milled pine to fix those saw horses, Great looking truck!

[@benash9407]

This is the best looking truck ever, its great to be able to see it coming together,thanks for doing the videos. 👍

[@ourhaus9164]

I love that you use your trucks man. The 3-Kitty looks good with that monster in the bed.

[@fj1397]

Pretty Balsey putting the motor in the back of your truck, what could possibly go wrong!!! Love the build, keeps me motivated in my shop on my builds

[@pikehunter23750]

Absolutely love seeing old iron given some love and attention and put back to work! You are a true artisan Rich! Stay filthy!

[@calebs1434]

This is the type deboss videos i fell in love with.

[@tomgensemer8515]

So glad you went a bit deBoss with the Fergo. She’s a beauty. Nice job Rich and team

[@Themrjakecollins]

Yessss!! Been on my own project all day after your motivation. Keep it up bud!!

[@DEBOSSGARAGE]

That's what I like to hear

[@Themrjakecollins]

​@DEBOSSGARAGE you're the man!

[@TurboChicken313]

That exhaust reminds me of ms fritter from cars 3

[@prefab4508]

Just Plain Cool Truck!

[@connorcurtis7109]

Getting the proportions just right! Nice! And functional.

[@larrydavidson3402]

This truck just keeps getting better and better!!

[@eightycutty]

Nothing sexier than stack racks when they are built right 🤩

[@tobywhitney4798]

Love the look the stacks give the truck.

[@Cambridgeshire-m1x]

Excellent i hope you get to build a huge workshop soon you deserve one 👍🇨🇦🇬🇧

[@darrenbutler1938]

This is going to be one sweet build i love it and can't wait to see it rolling coal hauling down the road my hat's off to You

[@tomcleghorn4005]

I love this truck!

[@mitchcronin8689]

Y'know, Rich... If you only lived about an hour closer to me, I'd be volunteering my help to you full time, all the time... You'd have to chase me away! I love the stuff you do. Thanks for sharing it with us. 👍

[@MartinSmiltneek]

Rich, For my bed I have the bed powered by a 7 pin trailer connector on the back of the cab. I use that connector to charge the battery in my camper by extending the wires to the rear of the bed. I have a box on my 50 to tow my boler (painted to match). I think the same setup will work for you.

[@FrostyBravo]

I cant imagine what your cooking up for the next HD project !!!

[@gar24407]

The stacks remind me of miss bertha from Cars 3😂😂😂. The school bus on the demolition derby😂😂😂

[@jmar5787]

That's the same HM130 max that i have ...love it built quite a few things from trees from my property!! Rich you know if that Bronco is in the way I can take a road trip and get that outta your way!! lol

[@DEBOSSGARAGE]

If only there were more hours in a day...

[@autobootpiloot]

@@DEBOSSGARAGE hire more people, that’s the only way to buy time.

[@jmar5787]

@@DEBOSSGARAGE Fargo is coming along and looking Great!!

[@Fleetsuper]

Just love your vision. Can’t wait to see it complete (or nearly complete) 😉😉

[@kennyspry5189]

Should have left the exhaust height alone now you will have exhaust smoke over anything you haul.

[@jonniessink1]

For charging the bed battery you could put in a 7- way plug like on your semi to charge the battery and run lights while on the truck, and if you use the roll back as a normal roll back tow truck. Then when you want to drop off the bed completely just unplug the 7-way and use you Bluetooth controller setup you were think about.

[@mesh1248]

Stacks are cool just be aware it’ll blow soot over your load or whatever comes outta your exhaust over your load

[@geoffkeller5337]

Just like the ones from Welderup

[@anthonygreco2596]

I have that same engine in my rollback!!!! I love it!

[@zachburns9424]

You should debut this at motorama this upcoming year! Would be awesome to see there

[@Skyper100MC]

For charging the battery, victron has some usefull stuff

[@EvanDunville]

This is such a cool build!

[@brandonmaley6737]

AWESOME!!!

[@v8motors.]

Man! you put some work in Rich. Top stuff.👍

[@kevinharms5558]

❤ this build. Own it's brother. Been thinking about how to build it.

[@johnwheeler8964]

❤love this build cant wait to see it around wellend

[@JeronWhite]

Good truck

[@davidcolesr.8628]

I LOVE that RIGHT DeBoss, Here We Go,!!,!

[@toby1kenobi493]

Wow. Nice work! Your projects are so good, and so labor intensive! Nothing but respect for all the work you put in. How do you do it?!?! Deboss Life Coach channel?

[@thomasstraulina9098]

Satin clear would look so good on the cab

[@billyhaddock5540]

Rich, the name FARGO remind me of the ND Movie FARGO! Great suspense movie.. Anywho ur Fargo Flatbed Truck will haul heavy stuff. newer motor YEA!

[@1944chevytruck]

GOOD JOB!

[@benschlack5814]

Looking good bro

[@casycasy5199]

that looks Hickman those stacks are sweet

[@drewross8824]

I'm close to Gravenhurst lol I would of been happy as heck if I ran into you there!

[@Tmlong333]

Amazing stuff!

[@Steve-od2di]

in the future will you consider putting the Edison drive train into, it would be fun to have the tow pig and the "small truck running the same systems.

[@DEBOSSGARAGE]

definitely in the cards!

[@Steve-od2di]

I grew up in Merritt, so have. been a fan of Edison and their ideas, for me I would love to build a tow pig for the 5th wheel using the kit, seems like a natural fit.

[@adc604]

Not feelin' the stacks, but to each their own. Still enjoying this build and now with the new pump and some turbs, this thing is gonna be awesome.

[@shanewright6958]

Looking good 👍👍

[@bradfuhrmann5768]

Look into getting a ported head for the 466, there are quite a few companies in the tractor pulling world that port a factory head. Riverside Engines in Ohio comes to mind

[@rossnewton4023]

Man those front wheels look ridiculous,it will be fun driving that in the rain .

[@AUSSIEGARAGE_YT]

You should do a 2nd iteration of the Fargo with the Edison guys!

[@elitedood12]

if you want a really clean miter on those stacks use a horizontal bandsaw

[@chrisanslow]

Me: I’m not going overboard on the Fargo. Also me: let’s go nuts on the Fargo. 😂😂 Love it.

[@one4stevo]

Holy smokes that fargo looking hot.. DAM

[@jyoung9181]

Love the statement..."get it right the first try for the 2nd time on the 4th time"

[@jaredchristie8882]

Awesome job mate

[@NZSAS666]

When the series started rich "were just going to do this easy not take too much time making it perfect" rich today "we're going to compound turbo it" Love it

[@ReNeu60]

Hey if Rich if you read this I would like to tell you the cut off wheels from amazon listed as Canadian Tool and supply are really good. Great price and they do not disappear quickly like some I have tried. Easly as good as walters I have bought at the welding shop. Not had one explode on my yet I am on second box. I am not nice to them.

[@DEBOSSGARAGE]

Thanks man!

[@tythompson3873]

18:34 small solar panel will be charged if you take the bed off and put a different bed on

[@davidwostrel]

Congrats you made a roll off that looks like "Miss Fritter" from Cars 3

[@mikehardin7086]

Hi Andy!

[@Notfilthy-ImAndy]

Hi Mike!!

[@josephmaughan1635]

It's always a good day when I can watch a deboss garage video, thanks.

[@ericmackison9517]

Just put a 7pin RV trailer plug for a 12 volt (+) lead to keep the battery charged. Put the plug wherever it makes the most sense with the bed moving.

[@phillipcave1197]

Lithium battery and DC to DC charger on the tray with an Anderson plug for quick and easy connection, to get charge from alternator

[@CharlesManch]

Your head was hilariously dirty after you pulled that DT408 😂

[@RandomDude989]

I'd love to know about that Bluetooth system. I wanna add some lights and not drill holes in my roof... But I can use a rechargeable battery pack to power them. Just need a way to signal them on and off.

[@nodaklojack]

Had to sub. Nice build ya got goin eh.

[@davidcolesr.8628]

He who has most toys wins the game of life that’s the rules. Everybody knows the rules so far Rich, you are in the lead by a long shot.😂😂

[@kailuagarage]

Paper coping templates for cutting various tubes in Fusion 360 are surprisingly easy

[@DEBOSSGARAGE]

I had it marked out before my laptop would be up and running

[@kailuagarage]

@@DEBOSSGARAGE It works for any shape of tube at any angles - even for something like a roll cage where multiple tubes join at a single point, so it is a good skill to have ... and it is fun! Don't be a chicken - you will need the skill to keep up with the Edison guys haha

[@Mick_ndngrtig]

😎 ideas put in action bout stacks headache rack same colour asl grill?

[@K-State_Nate]

If you have the narrow axils from Edison you could turn a ford ranger into a hybrid welding truck.

[@jamesEra607]

What happens / where you plan to run the exhaust when you change the truck bed/ bin

[@connerlabs]

Yeah I want to know how the exhaust system hooks up to the headache rack too

[@eppot1]

:-) looking good!!!

[@alexanderjones6383]

Uh Oh, 17:59 "The Hammer" is back!

[@darrellbedford4857]

I love these types of builds wether it be trucks or cars. For the trucks how do you get it safetied and registered. What department sets the weight ratings.