Neutron-R Hybrid FPV Race Frame Build : Part 1

[@darlikchronicles]

I like the frame and the custom prints a lot... camera and cap part are well designed and suit the frame's look.

[@heavyeyez8874]

Awww man, the proton frame was awesome, now i going to have to get these 2 frames, love the frames flight club!

[@FlightClubFPV]

thanks bro! check out the PROton-R if you are using 30x30 parts

[@JoshIsReallyAwesome]

Nice vid as always! FYI, the helio did not have 2 gyros, it had 2 processors.

[@leelifelonfpv1375]

FYI It has 2 gyros as on the webiste mentioned

[@JoshIsReallyAwesome]

Lee LifeLon FPV not sure what website you are referring to but the Helio boards only had one gyro and two processors: an F4 running normal flight controller stuff and an F3 dedicated to gyro filtering.

[@leelifelonfpv1375]

@@JoshIsReallyAwesome click on the website in the description. Its the flight club website

[@JoshIsReallyAwesome]

Lee LifeLon FPV dude. I’m not talking about the Talon F7 Fusion.

[@tehllama42]

@@leelifelonfpv1375 Josh is correct - the Helio had a single gyro, with an F3 procesor dedicated to running the filtering, and an F4 handling the rest of the FC duties. Whatever the site description states, that's how it worked. Either way, the Talon is awesome, and to be honest for racing the F4 V2 with Pit Switch is all you need - the things fly absolutely amazingly well with just that, and you don't need more.

[@thetubemeister82]

Great stuff Mike. My Neutron-R frame arrived recently, looking forward to building it!

[@DoubleA_AMAfpv]

Good stuff Mike. Attention to detail is part of the game! I REALLY like this build.

[@tehllama42]

These things really go together that well, and I have to agree with the part choices. Mine are all different builds, but the frame/ESC combo is pretty much 'the' answer

[@aldenhauser9555]

Really great build video!

[@MCsCreations]

Pretty beautiful build, dude! 😃 The frame is really beautiful!!!

[@IrvingtonArms]

I wish I'd seen this before I built mine.. my FC has m2 holes. Made it a pain in the tail to get the parts secure... that little recess area in the necleus plate is handy.. I almost want to go re rout my wires after watching your assembly

[@fpvlegion]

So CLEAN! great video!

[@ohgeez9971]

Doh! Wish I would have seen this video before I put in my order like 30 mins ago. Those half plates for the vtx would have been perfect.

[@archer4922]

Gotta love those Xilo motors. I love the 2207 1750’s

[@FlightClubFPV]

cheap and fly great!

[@tehllama42]

Those party - not my favorite though. I'll run the other brotherhobby R5/6 variants over those, mostly for aesthetic reasons.

[@Kalishir]

Nice build, very clean. Congrats on good content.

[@turbokid4872]

So cool build

[@steffenfpv5579]

such a nice clean build. I have to say, i always try to build like you. simple and clean. I orderen a couple Flightclub Frames. But the Neutron-R or Proton R i cant find in Germany//Europe. I would love to rebuild this one

[@FlightClubFPV]

thanks! HobbyRC in UK will have the frames within 2 weeks

[@steffenfpv5579]

@@FlightClubFPV oh okey, i have to check if they ship to me.

[@madebyandre_]

Great video. Just a little criticism though. Kind of dangerous leaving your wires for peripherals ie vtx, cam, and receiver a little too long having bare wires exposed. Maybe its just me but I always try to make it a point to keep the insulation all the way to the solder joints.

[@BikeGuyFPV]

Nice clean little build 👍 Any tips on how to start a website if one were to start selling a self designed frame?

[@nicomyburg4678]

Love your channel 😎

[@paodj13]

Great, building the exact same setup except for the motors. Would you mind sharing the cap holder file? 🙏

[@nerdCopter]

+1👍 experience shows, thanks Mike

[@limitsizyasam3891]

Really good build thank you :) Also, where can we get half 20×20 carbon fiber plate to mount the PRO32

[@rodrigo125]

Here you go mate! fpv-flightclub.com/products/half-vtx-carbon-fiber-plate-20x20/

[@rodrigo125]

Hi Mike! Awesome video! Cant wait for the PROton-R to be back in stock! Do you sell the half VTX mount for the Proton-R? only found the 20x20 one... And what about the cap holder? i dont own a 3d printer ): Thanks for the video and awesome support!

[@FlightClubFPV]

proton will be back in stock next week. no i don't have that half mount for 30x30 but i'll order it in the next batch of frames. thanks!

[@FPVish]

whats up w the bangkok frame? still waiitng

[@naoichihara5108]

I refer to your videos. I bought two Talon f7 with MPU6000 and Fusion, but neither motor 4 works. ESC is Talon's Gigawatt and there is no problem here. It looks like you've been using Talon f7, but have you ever experienced such a bug? I bought it again because I thought it was an initial failure because the FC I bought was defective. Is it a problem that can be avoided by setting? Do you have any good ideas?

[@zeizei7950]

From Heli-nation site, use cli-commands: Resource MOTOR 6 None Resource MOTOR 4 C08 Save

[@worachart111]

wow very nice

[@JoshIsReallyAwesome]

Where's part 2? The people demand answers! :)

[@JoshIsReallyAwesome]

Btw, I just built 2 neutron-r’s with the help of this video. Used talon f7 fusions as well

[@roryoconnell9424]

Very tidy build 👍. Quick question, when I plug in my lipo(4s) I get a spark sound 😮, it hasn’t been a problem, just wondering do you know why it does that ?

[@gavlarfpv7841]

rory oconnell 6s cracks even more

[@roryoconnell9424]

Gavlar FPV it’s normal so?

[@FlightClubFPV]

yeah it's normal. just plug in faster :)

[@tehllama42]

On 5S and 6S, it just gets louder. Something useful you can do is adjust the prongs on the male side of the xt60 connector to make sure they have the right tension - either collapse them down, or use a small phillips screwdriver to spread them out so you get more consistent contact when you're plugged in (and less likely to come unplugged in a crash), as that helps too.. Other than that totally normal. Smoke stoppers are still awesome on fresh builds, as that's the only other time inrush currents can ever be problematic.

[@PaulHodgetts]

You have a capacitor wired across the VBAT +/GND, right? Probably what you're hearing is the capacitor charging up. It charges so fast it's like a short across the VBAT/GND for a few milliseconds and sounds like a pop. Totally normal.

[@RezaDastmalchian]

My goodness. I dont think ive seen a cleaner build.

[@daltron4000]

get fucked

[@robe2295]

Where is the capacitor holder on your site?

[@FlightClubFPV]

i just posted it! fpv-flightclub.com/products/neutron-r-capacitor-holder/

[@DimplePoji]

what happened to envyastro?

[@BikeGuyFPV]

And Sedhendo too.

[@FlightClubFPV]

envyastro is hustling at his business

[@tehllama42]

He finished with his bachelor's degree, and is grinding hard on new adventures. I do look forward to hearing from them again soon.

[@leelifelonfpv1375]

Frame is out of stock ...... wow ......

[@FlightClubFPV]

the red and purple nucleus plates are out of stock until about next week. the grey are in stock now.