flicko! thanks for the video notes just for me 1. make 2 recording tracks look at latency | First record signal is raw, second with fx 2. PRO-Q 3 3. PRO Q DS | preset: male wide band 4. R COMP | threshold -14.7 ratio 2.95 gain -8.2 attack 5.22 realease 160 5.PuiqTec FX: delay - echoboy with 1/4 1/2 etc.. long reverb - valhalla vintage verb short reverb - PRO R adlibs: phone filter PRO Q
@lorenzosantigli9206 Жыл бұрын
Thanks this is actually useful
@selavy Жыл бұрын
урал
@user-ux1vj9vx7s Жыл бұрын
Why are you listening the settings for the R Compressor. They are based on his incoming audio, and it is subject to change every single time you record something, ultimately rendering it irrelevant and useless.
@frmtheden11 ай бұрын
Great Note taker! Thanks
@kyto316 Жыл бұрын
it's amazing, fliko always posts exactly the video I need ! the best
@SciFiGodfather Жыл бұрын
That option+command+U shortcut is insane holy shit
@lilwombat Жыл бұрын
The main thing about the latency track is that the monitoring is set to off if anyone is trying it. Also he doesn't need to record the track set to in since it's just monitoring. I record myself and I don't actually find it to be better because I was hearing it with the latency when I was recording so I already adjust for that subconsciously.
@DEDBOIGRACE Жыл бұрын
I love how Kenny breaks down the separate monitoring and recording tracks in this. Really similar to the workflow working with the Apollo console but he pulls it off entirely in Ableton. Actually kinda 🔥.
@tajbratton2961 Жыл бұрын
There is a way to get around the “tracking” and latency” tracks for Apollo users. Just monitor through console and use console for your effects while monitoring. Then put your Ableton vocal chain on AFTER recording, for playback. Still adds a bit of an annoying extra step but this way you don’t have to keep track of two tracks and moving takes.
@mezcalibur7778 Жыл бұрын
you can do this also on an audient or discrete or almost any interface now
@chriskill6661 Жыл бұрын
Are you saying to basically just mute/unmute your vocal fx chain for playback? Monitor through console > record to track with vocal fx chain muted (in Ableton) > unmute fx chain during playback ?? I’m just worried about hearing both console and Ableton signals at the same time.. are you also changing the track from “off” to “auto” each time you want to playback recorded takes? Hope this isn’t too confusing 🫤
@DEDBOIGRACE Жыл бұрын
This is what I do in logic. It’s actually really convenient cuz I mix with a lot of UAD plugins and I have a bunch of DSP. So I can basically run the exact same chain on my interface itself as I do in the DAW. And both the monitoring and recording channels end up being 0 latency cuz the plugins are running on the interface, not the Mac. 🔥🔥🔥
@eli90s13 Жыл бұрын
Hmm I have an Apollo and I monitor through FL or Studio one and I never really have latency. Maybe he's recording at 48k instead of 96k?
@user-ux1vj9vx7s Жыл бұрын
You can use the UAD plugins through console or in your daw,, and the latency will remain the same. You don’t need to just run them through console for them to be latency free
@jontr4390 Жыл бұрын
the goat's kenny & fliko 🐐🐐
@skinny_chris Жыл бұрын
this reminds me of when he was dropping gems with T-Pain while making a beat for him. We need T-Pain on the cave!!
@peezyy3 Жыл бұрын
if you add some heavy tape distortion before the pro q in the "PHONE" track, it sounds sick
@97HawksFly Жыл бұрын
Just offering an alternative to his latency workaround in Ableton for anyone who may want a different option (I learned this from an Alex Tumay stream): Create at least two tracks, and name one of them "recording" or "tracking" Select them both and create a group Apply your vocal effects to the group track instead of the recording track Arm your "recording" track and record to that Use the second track as the place where you keep the good takes This way you don't have any effects on your "recording" track and the vocalist can hear their effects without latency (your buffer size/delay compensation has to be set correctly of course)
@HalfJoked Жыл бұрын
Would the second track be necessary using this method if you can use Take Lanes or am I missing something?
@97HawksFly Жыл бұрын
@@HalfJoked its not necessary but it gives you more control of your edits on the fly
@preciousgaming5191 Жыл бұрын
You can do this easier: Put monitoring on your effects "Tracking" track. Create a new Audio Track ( CMD + T ) and put the monitoring off on that --> --> Arm both tracks for recording --> After recording just take the one from the empty effects audio track.
@onstandard Жыл бұрын
@@preciousgaming5191 isn’t that what kenny did?
@felixftp9670 Жыл бұрын
The Problem is the effects goes through the track with off monitoring, so no
@papito2lindo Жыл бұрын
I used an Apollo Twin so I can monitor the vocals but this is a great workout for non Apollo user. Hell sometimes we want to get creative with the FX and now you can do that and still have a clean take latency free. 🙌🙌🙌🙌🙌
@nathanaeljames3059 Жыл бұрын
@@BrandonAdams1010 Apollo has zero latency that makes it to where you can still monitor without the daw on. The Apollo is essential for people that track with ableton imo. External plug ins alleviate the cpu load as well.
@jahhe2611 Жыл бұрын
@@nathanaeljames3059 i totally agree, the only downside is you HAVE to buy Auto-tune in order for someone to monitor with tuning. Other than that it's the best thing ever.
@priticolours1177 Жыл бұрын
@@jahhe2611 my arrow came with autotune realtime and realtime pro
@jahhe2611 Жыл бұрын
@@priticolours1177 SHEEEESHHHH, lucky you!
@nathanaeljames3059 Жыл бұрын
@@jahhe2611 I got mine used and the guy said Antares came in the free bundle as well.
@launchpadmcquack98 Жыл бұрын
Just a heads up regarding latency. Switching any armed track to "off" instead of "auto" or "in" will have the same effect regarding latency. You don't need to take anything out of the FX chain or change the output routing of the track.
I’m going to attempt to explain the latency and tracking situation in a way that is more easily understood. Basically Ableton has an issue with its internal routing that allows the plug-ins on your track to affect your recording. So you’ll notice if you record with a heavy gate on a track in Ableton, it will just straight up not record the more quiet parts when in reality the gate should be POST your recording not PRErecording therefore it SHOULD have no actual effect on the recording itself once the gate plug-in is removed. Unfortunately Ableton hasn’t gotten their shit together so this or being a UAD user is the only work around. TLDR: Don’t record with a gate of your track in Ableton. Apply gate after recording and beware of Ableton’s ever so slight latency issues
@leaveitorsinkit242 Жыл бұрын
You still get latency even when you turn direct monitoring off?
@cityhippie Жыл бұрын
Thanks for mentioning the gate, I was wondering why he wouldn’t put even a light gate on the monitor side, just nice to have but not if it’s being printed onto the recording
@Fizzzel Жыл бұрын
wtf the thing with the gate is just not true, the effects/plugins on a recorded track are never baked into the recording itself, even a gate. If you delete every effect on the recorded track it will be just raw (besides some latency if monitor was set to "in" as kenny explained). How do you get to your result with the gate? I'm interested :D
@tajbratton2961 Жыл бұрын
@@Fizzzel i don’t know how you came to the conclusion that it’s not. I’ve recorded in Ableton for years and can assure you, it’s true. I agree it doesn’t make sense but if you record with the stock gate on, it affects the recorded signal
@michaelseth-qf2lt4 ай бұрын
@@tajbratton2961Do you recommend I change Daws via pc? I love Ableton but recording vocal chains act funny at times and it's getting to me...
@eye4585 Жыл бұрын
I needed that!
@TO32242 Жыл бұрын
Where We can find it
@ayeitsnouraofficial Жыл бұрын
someone make this in FL 21😭🙏🏼
@miahdona8161 Жыл бұрын
…he just broke it down piece by piece…and you still to lazy to replicate it for your self
@ayeitsnouraofficial Жыл бұрын
@@miahdona8161 you obviously havent touched FL lmao
@WattyWrld Жыл бұрын
I actually did a template with full inspiration from kenny in fl 21
@MendiMan711 ай бұрын
@@WattyWrld Could I please get that sent to me? I would really appreciate it! Thank you!!
@RIGHTOCCZАй бұрын
Lemme give ya, I got it❤️@@ayeitsnouraofficial
@itube027 Жыл бұрын
Very useful. Thanks 🙏🏽
@derek.1639 Жыл бұрын
WOAH KENNY
@lawrence7268 Жыл бұрын
this is great!
@limittestresearchinstituti580111 ай бұрын
THANK YOU
@jakesvitak5533 Жыл бұрын
Ayyy
@phinestro Жыл бұрын
That’s so smart!!!!! Record to two tracks and bypass latency in plugins and master
@fatback1388 Жыл бұрын
Boosting that much high on the puigtec is INSANE but also.. kinda hot? Idk
@oxiary Жыл бұрын
yaaaaaaas !!
@chrisgotvibes5 ай бұрын
This applies to FL right? Can someone translate the "tracking" and "latency" part, into FL language? (I know it's not really different, but I think the terms threw me off.)
@JayDeeOfficialx8 ай бұрын
I use the UAD sound card with the Manley VOXBOX for tracking vocals,so all that double track for latency isshh , I'm good.
@luigi-om8vq Жыл бұрын
amazing
@marleyxl8959 Жыл бұрын
Literally can't spot a single difference from his edit of the pro-r vocal backings bright preset
@LokeyeMC Жыл бұрын
I couldn't spot a difference either. He may have forgot to make his adjustments on this version. I just wish I could figure out how to record with reverb and delay without latency coming through the headphone mix. That's the thing that gets me still.
@doneboyremo Жыл бұрын
Thanks bro
@LilaSessions Жыл бұрын
I have an important cuestion 😱 after you record do you bounce the vocals with all the processing or do you bounce them dry and put them in the song session?
@wc_239 ай бұрын
Puig tech saved my life
@DuceIRae Жыл бұрын
why not just monitor through hardware.. ? no latency that way .. you can use effects on the hardware for the artist if the need that.. then record clean or with things like slight compression etc
@rebinu2 ай бұрын
cause he’s on the go most of the time with not the same hardware everywhere
@andrewg563911 ай бұрын
I'm still getting latency on playback, enough to really throw a vocal performance. The only work around i've found it to DM straight off my interface, but then I have no FX etc which can really throw the performer. Anyone have a work around? Running a Mac Mini m1, so should be powerful enough to handle it.
@LazyAnimexo Жыл бұрын
ok now where can i download it to just throw it on ableton :/
@nickdijcj1 Жыл бұрын
i wish he wouldve proved the latency no latency thing in this video, just showing the waveform difference or something
@rhonga2k Жыл бұрын
I wish I had more space on my 60gb mac book air and external drives to record on 2 tracks at once
@dequince Жыл бұрын
6:20 💎 #yuhhurdme
@eddiecampos Жыл бұрын
Kenny: OH I have a new vocal chain of expensive plugins Me who has been using the same vocal chain with the same stock FL plugins for years: Cool
@fatback1388 Жыл бұрын
Everything’s free online 🏴☠️⛵️
@swollen111 Жыл бұрын
I hear myself so low compared with the 2020 chain, does someone feel that way?
@Pablaw Жыл бұрын
saaaaaame bro, it seems this come from the R comp lowering everything, need help pls someone
@realtoni420 Жыл бұрын
Dont copy 1 by 1, you do not have the same Mic, Preamp and Interface like Kenny. You will have to adjust Volume through some other means (e.g. LA-2A on either beginning or end of chain)
@Pablaw Жыл бұрын
@@realtoni420 thanks!
@johnp4365 Жыл бұрын
💎💎💎💎
@GoodxJ Жыл бұрын
👍🎤
@strale2503 Жыл бұрын
Bro if i add that many fx to the channel im recording vocals on, my pc would get a digital heart attack
@whome806 Жыл бұрын
Should I use mono or stereo plugins for vocals or does it matter?
@lorenzosantigli9206 Жыл бұрын
Can someone explain me why he doesn't use the gate plugin anymore?
@chriskill6661 Жыл бұрын
He probably treated his room better for cleaner recordings and just got better at tracking. If you have a quiet enough room and understand how to track properly you shouldn’t need a gate.
@oliverhed26553 ай бұрын
Why doesn't he have a gate on the tracking track anymore??
@KingJosiahBeats Жыл бұрын
yall got the template he used for fl studio? the updated version
@bf2853 Жыл бұрын
You dont have to record on the tracking. I do the same things just have it set to in
@colossalcolosseum9555 Жыл бұрын
Dudes workflow is crazy
@3leven Жыл бұрын
sooo no noise gate anymore?
@sloppyshoez71659 ай бұрын
Should the beat have been mastered before or nah?
@TXNITRUE Жыл бұрын
Logic don't have nearly any latency with a full vocal chain. It's time to make the switch.
@albanyrebelion Жыл бұрын
additive bfore comp? sends?
@MrTonyPruden Жыл бұрын
Mic, pre, comp front end?
@bigsantamane Жыл бұрын
how do you not hear yourself with delay when you record with all plugins?
@LokeyeMC Жыл бұрын
exactly, that's what I'm trying to figure out lol
@bigsantamane Жыл бұрын
@@LokeyeMC everyone saying use the low latency mode on autotune but what about the rest hahaha.....
@LokeyeMC Жыл бұрын
@@bigsantamane Haha yeah. But I figured out what it was finally. The trick is to not have the track "activated" when you're recording. Somehow I can still hear my effects through the sends on a track even if it is not activated. But as soon as it's activated I get this terrible loud echo of my voice during the recording process.
@praxusjoon24786 ай бұрын
what do you mean by activated?@@LokeyeMC
@AintyouMarcus2 Жыл бұрын
How would this work in Logic Pro?
@Jetpackth Жыл бұрын
how can you do the latency thing on fl studio??
@mylesjohnson9398 Жыл бұрын
Can somebody explain wtf a slap delay is?
@tonyc110 Жыл бұрын
A slapback delay is a delay with a very short time, so it gives a slightly staggered doubling effect. Rockabilly guitar is a classic example.
@LokeyeMC Жыл бұрын
Thanks to Toni's comment below, it's looks to be a 32nd note on tempos between 75bpm - 120bpm. And then a 48th note for slower than 75bpm and a 24th note for faster than 7bpm. In fact a slap delay wouldn't drift into 16th note territory until you're above 240bpm in bebop land. But 60ms - 100ms is a far more direct way to think about it.
@realtoni420 Жыл бұрын
Its between 60-100 ms delay, not following BPM divisions.
@tufftuffpass1611 Жыл бұрын
bro just get an uad apollo
@lieutenanhope017 Жыл бұрын
How to do this in logic pro x? Or do I need to worry about this? I have a uad apollo, and i tried this trick with logic, but it won’t let me record multiple vocal tracks from the same input.
@3leven Жыл бұрын
record in mono, I have a mixer plugged into the input on my interface coming in input3-4, set one input to 3 and the other to 4, its the same signal from the mic, that'll allow you to record enable both tracks. that's been my best workaround for now, I don't think Logic will allow record enable on two tracks with the exact same input but multitrack recording is definitely possible
@marioaponte978 ай бұрын
Does anyone know if the als archive of his new vocal chain is available in the discord sub rewards or anywhere else?🙏
@reggiebushjr619 Жыл бұрын
so do you have to put autotune on each track individually? i dont think many peoples cpu can handle that much. is there a way to print the autotune while recording? or maybe have it on the group bus?
@reecewilson6510 Жыл бұрын
i dont use ableton but on FL you CAN print processing such as auto tune onto the vocal recording so i imagine its possible in ableton too. you dont really want tuning on a bus/aux as i can imagine it causing some unpleasant results, especially on harmonies.
@lilwombat Жыл бұрын
You can print it but yes you need it on each track it's designed for monophonic sounds
@earwermcandy11 ай бұрын
No latency on an Apollo 64 core AMD Threadripper with 256gb ram, even running high latency plugins
@goldgrain Жыл бұрын
no cap, iceeey 🧊🧊 follow your vision!
@TO32242 Жыл бұрын
Where can i get it ?
@taylorstep8135 Жыл бұрын
This is also good for samplemakers who use live instruments.
@roma_redblack3640 Жыл бұрын
İf you have not Hardware.. You doesn.. Bruh..
@theshiguyy8595 Жыл бұрын
I have no clue what half of this means lol anything to watch to help understand it thanks !!!!!!
@albanyrebelion Жыл бұрын
waht interface?'
@kayukthebruh56013 ай бұрын
why he in a microwave
@lovelines11 Жыл бұрын
Can someone share a template 🙏
@TO32242 Жыл бұрын
did you find it ?
@silent5353 Жыл бұрын
Fr fr
@heyimoolox Жыл бұрын
why does he use 2 tracks for wav files?
@swollen111 Жыл бұрын
Someone knows how to make this on FL or has link?
@goeighta Жыл бұрын
I just commented this: In case you use FL Studio and want to do this: On the mixer, route one RAW channel to another where you want to put whatever effects you want, then unlink the raw channel from the MASTER channel and arm disk recording (dot button at the bottom of the mixer channels) on the channels you want to record, then hit record>play to start recording (it will be reflected in the playlist). Additionally, if you have a project with too many active plugins on other channels, it will be impossible for there to be no latency, and if for some reason you don't want to freeze all the tracks or render the instrumental, adjusting the track latency (clock button at the bottom of every channel on the mixer)>Set from>Master. This adjusts the latency and makes sure there is not too much latency. I hope it helps someone.
@GalileoandtheStars Жыл бұрын
Why tf would you monitor on ableton when you have an apollo
@AshtonHarris1 Жыл бұрын
I wonder why he doesn't put the vocal chain on the individual channels. I find that it weakens the strength of the plug-ins when its on the Group, rather than the track
@bf4lvr Жыл бұрын
What do you mean weakens the strength
@lexflp9 ай бұрын
for latency
@lexflp9 ай бұрын
and cpu
@Thebirdfromreo Жыл бұрын
Someone please make this template in logic. Lol I’ll pay you
@FrankBell Жыл бұрын
Lol Just did ;)
@TO32242 Жыл бұрын
@@FrankBell do you have it for ableton ?
@FrankBell Жыл бұрын
@@TO32242 No, but isn't he using Ableton here?
@raffa97839 ай бұрын
So he's letting them record completely dry?
@lorenzosantigli9206 Жыл бұрын
Anyone who knows how to find waves plugins? (you know what i mean)
@lilwombat Жыл бұрын
rutracker
@katielowen Жыл бұрын
CLA Hoecallllllllllllls😏
@LokeyeMC Жыл бұрын
I get latency in my recording if the track I'm recording on is activated. I'm running a Scarlet 8i8 on a good laptop set for performance with 256 buffer and 11ms of latency that I've adjusted for within the Audio Setup window. Does anyone know what else I'm doing wrong? After years of recording in a dry mic this video got my hopes up only to be crushed again when trying it, lol.
@user-ux1vj9vx7s Жыл бұрын
The only thing I can think of, is try 128 buffer at 44.1 when recording, then during playback raise it to 1024. I’m sure you’ve already done this, but that’s really the only think I can think of, unless I knew all of what plugins you were running when you’re recording
@user-ux1vj9vx7s Жыл бұрын
You could always spring for an Apollo twin at some point. I know they’re expansive, but they really are worth it, and they allow you to run latency free with their plugins
@LokeyeMC Жыл бұрын
I accidentally had my vocals running back to my headphones, not just the dry signal through my sound card, but the full wet vocal, lol. I muted that somehow, and am now fully reaping the benefits of hearing the vocal effects, and the dry vocal from my sound card, with an additional wet vocal track, if that makes any sense. It completely removes the latency issue.
@praxusjoon24786 ай бұрын
bruhhh please explain what you did to achieve this. im running a focusrite scarlett 2i2 and AT2020 mic. I would rlly like to freestyle in key of the beat with no latency. how did you do this??@@LokeyeMC
@LokeyeMC6 ай бұрын
@praxusjoon2478 sounds fun! So if you click the yellow button on the track it will activate the channel, meaning you'll hear the processed vocal. Simply deactivate the track by unblinking the yellow button. Your voice will be audible because of your sound card's direct monitoring of the dry audio signal, which will have near-zero latency. But you'll still get the reverb and delay from the sends as long as the send channels are routed correctly like in the above video. Hope that helps. I made the same mistake. If you're still having trouble just let me know how your two tracks are set up and what sound card you're using.
@kairos.2001 Жыл бұрын
why doesn’t he use a doubler anymore?
@rebinu Жыл бұрын
Just record 2 takes
@feelingevaporated2912 Жыл бұрын
@@rebinu sounds a lot more natural and interesting too. A doubler is a convenience thing
@youngorangee Жыл бұрын
I hate doublers
@kllwtt Жыл бұрын
How come?
@youngorangee Жыл бұрын
@@kllwtt gives the vocals a cheap plasticy sound
@feelingevaporated2912 Жыл бұрын
@@kllwtt ugly way of imitating the genuinely nice effect of multiple takes
@snoberry643 Жыл бұрын
this is stupid just set your tracking to go to ext. out, input monitoring, reduced latency with monitoring checked in settings, then record on your main vocal tracks directly so you dont have to copy paste, just make sure they are set to off on input monitoring. like what. you can test this yourself in like 2 minutes
@FC420ent3 ай бұрын
you're absolutely correct, literally just click reduced latency when monitoring and it removes the need for a second track, thanks for sharing that btw
@PerryLevy Жыл бұрын
But the vocalist is listening to a track with latency. I guess it's super minimal
@LokeyeMC Жыл бұрын
To me the latency is very loud, so it messes up my thinking when trying to perform with my voice on the mic while listening to latency in the headphone mix.
@UnicornWaves Жыл бұрын
two tracks makes no sense w apollo or antelope
@bitchass9073 Жыл бұрын
Isn't exporting the beat and recording vocals on a new project enough?
@joecm Жыл бұрын
All love to Kenny - very talented dude - but 'tracking' and 'latency' will have identical audio recordings on them. I say that only to help anyone watching this with their recording setup
@bit1856 Жыл бұрын
yeah this setup confused me a little bit i'm not really understanding the difference, but maybe he's saying that the 'tracking' audio may be offset in the ableton grid (tho i feel like it wouldn't) so just to avoid having to pull it back a couple ms he just copies over from 'latency' track? dunno feel like i'm missing something here
@tajbratton2961 Жыл бұрын
They don’t. I’ve literally tried it in Ableton. The latency track with no plug-ins on it records with near 0 latency.
@tajbratton2961 Жыл бұрын
@@bit1856 try it yourself. Record with plug-ins on 1 track and no plug-ins on another at the same time then zoom in at the beginning of the transients and you’ll see the difference
@Kaleil Жыл бұрын
@@bit1856 the audio on the "tracking" track will have latency on it from the effects. It's unavoidable - even though it might be imperceptible, this will avoid the issue altogether. I do the same thing, but I'm not sure why he even records the monitoring track, I just have it monitor.
@leaveitorsinkit242 Жыл бұрын
@@tajbratton2961 What if you turn direct monitoring off on the track with plugins?
@ShayBurgman Жыл бұрын
I swear for a man like Kenny who likes things to be streamlined and simple, the whole process of multi track recording then moving the clip after every recording seems extremely non efficient
@tajbratton2961 Жыл бұрын
It’s an Ableton issue, not a Kenny issue
@ShayBurgman Жыл бұрын
@@tajbratton2961 don’t use Ableton then, I’m sure he’s proficient in every DAW
@tajbratton2961 Жыл бұрын
@@ShayBurgman I mean you’re right but clearly this is easier or more convenient for him then working in another daw ¯\_(ツ)_/¯
@vael_ Жыл бұрын
@@ShayBurgman Why would he be proficient in every daw? Most people only know 1 or 2 by heart
@feelingevaporated2912 Жыл бұрын
@@vael_ legitimately shouldn’t take more than a day to learn a DAW. Using a DAW is easy, making good creative decisions is hard
@michaelrice6620 Жыл бұрын
Please do not just automatically low pass your vocals around 20k lol. Sometimes you will have to for people that dont have a good mic or recorded in a really bad room. But main stream artist record on a c800g and its not so they can cut it at 20k lol
@EmThePenguin Жыл бұрын
20kHz is the threshold of human hearing, also i may be wrong but I believe that you can have aliasing issues with some plugins if they receive input over 20kHz and don’t have an oversampling option.
@silent5353 Жыл бұрын
Wait what does this all mean is there a setting I change ?cuz my mic ain’t the best?
@michaelrice6620 Жыл бұрын
@@silent5353 lol what mic do you have?
@silent5353 Жыл бұрын
@@michaelrice6620 its called audiotechnica
@michaelrice6620 Жыл бұрын
@@silent5353 at2020?
@SebastianBeyer8 ай бұрын
mhhh ... explaining all that cool stuff without a sound is a bit shame in an audio channel
@Opd3518 ай бұрын
dude so unneccsary having 2 record tracks, you can just record with UAD zero latency monitor
@ChaceBonanno Жыл бұрын
This latency bullshit is ridiculous
@youtubeuser4645 Жыл бұрын
without all the celebrity guests this guy is boring and a lame, give it a few years he will do a post malone and make rock music because it was his true passion, hip hop was just 'for fun'
@thestarlitwilds Жыл бұрын
you are slow bruh
@thestarlitwilds Жыл бұрын
is this gonna release?
@EatinBubsy Жыл бұрын
Last time I was rapping in the booth, I accidentally had a racist Chinese accent. No vocal chain can fix that 💯
@nine27 Жыл бұрын
this is exactly why tracking in ableton sucks
@celebratelifeecauchi4371 Жыл бұрын
so many guitars "its so beautiful look at it" 30 mins or less
@celebratelifeecauchi4371 Жыл бұрын
bro speak in english im smart and i have no idea w u sayin