Klick-Vinylboden laying Instructions Floor simply renovate

[@faridslim9516]

Le coupe plainte extraordinaire j’avais jamais vu cet outil, bravo pour votre excellent travail 👍

[@marlonlarios8186]

El mejor video que pude ver sin muchas palabras directo al trabajo .

[@douglashernandez93]

Enjoyed every second of your video and love all your tips and tricks. I also enjoyed the beats on the background.

[@scraplifetrashtocash4551]

Never cut any floating floor less then 8 inch on start row. This is a how not install a floating floor.

[@abamblack]

yeah...i saw that too. he didn't plan for a proper flooring

[@Kaspen031]

yep this is disgusting

[@grzegorziwanicki6953]

If you make the floor on the entire apattment you can not checked every corners. there will be always some place where will be less than 8 inch. You can planing this if you doing one room but not when there is so many rooms. So you don't know what you say or you probably never doing this work

[@reypalomo4257]

Lol hater, its all about the end result and he made it perfectly. There is no need to do any bs math its all about the skills. U definitely never worked in construction world 😂

[@luiscambiaghi6]

I have a heated floor... should I do the same or do I need any blanket in between? Also what would be better, 5 or 8mm ? Tks! Great job!

[@eppingen747]

Как приятно смотреть на хорошую работу

[@tentetente4020]

0ìjv9iiuv8uc 8uu8zf8xxxxz,7zz7z7df7 de n6ddd6¿wAw³²³²

[@dmitriR1967]

красиво на картинке, НАЧАЛО РОБОТЫ ПОСМОТРИТЕ ТАКИЕ УЗКИЕ ПОЛОСКИ ПО СТОРОНАМ С ПРАВО ИЛИ ЛЕВО НЕЛЬЗЯ ДЕЛАТЬ ( ЗНАЧИТ ОТ ПЕРВОЙ ОТРЕЗАЕТЬСЯ А НЕ ЦЕЛУЮ, ЧТО БЫ В ЭТОМ ЖЕ РЯДЕ В ПОСЛЕДНЕЙ ПАНЕЛИ ТОЖЕ БУДЕТ ШИРЕ ) .

[@claudiomirrodrigues4107]

Que trabalho bem feito. Parabéns

[@shanghaiearthmother4785]

nice video! 😃may i ask what's its parameter about thermal expansion and cold contraction?

[@naboulsikhalid7763]

Great Job, beautifully made and very enjoyable watch. Now, I agree with my wife to put vinyl in the house. No more words.

[@Cata2984]

excelente👌👏 trabajo muy profesional se ve que es el señor me gustaría saber que será ese spray que le agrega cuándo lo esta sellando

[@danielkennedy8438]

Can you go over existing linolium with this. The edges look like they grew out of the wall. Excellent pride in your work.

[@mxseba7232]

Super propre comme travail 😉🇧🇪

[@hectorlezama5870]

demasiado original este video los felicito por tan buen trabajo detallado

[@timravo5152]

Lovely job! 👍.. what an amazing tool that skirting board cutter is! First time I've seen one and looks like it was in skilled hands 🍻👍🍻

[@dmitriR1967]

красиво на картинке, НАЧАЛО РОБОТЫ ПОСМОТРИТЕ ТАКИЕ УЗКИЕ ПОЛОСКИ ПО СТОРОНАМ С ПРАВО ИЛИ ЛЕВО НЕЛЬЗЯ ДЕЛАТЬ ( ЗНАЧИТ ОТ ПЕРВОЙ ОТРЕЗАЕТЬСЯ А НЕ ЦЕЛУЮ, ЧТО БЫ В ЭТОМ ЖЕ РЯДЕ В ПОСЛЕДНЕЙ ПАНЕЛИ ТОЖЕ БУДЕТ ШИРЕ ) .

[@richardellmer4860]

Zu kleine und unschöne Randabschnitte sollte man vermeiden und können auch zur Reklamation führen. Raummitte ausmessen, Planken probehalber auslegen und so für Anfang und Ende die gleiche Plankenlänge ermitteln, 1/3 Stoßüberlappung ist anzuraten!

[@moa2545]

nice job plus affordable machine I thought is must to use electric machine

[@humanrobots6543]

Sehr schöne Arbeit😊

[@rubinskyabreu]

Excelente trabajo gracias por compartir

[@frangrey365]

Alucinante el control de colocacion que tiene este profesional, era bueno hacer el vídeo más despacio, para que me enteré bien de los cortes en las zonas de tabiques no me entero de d nada 😂😂👍

[@alejandrozimmermann8064]

Pues le bajas en velocidad de reproducción al vídeo 😅 lo puedes poner muy lento tmb 😊

[@Numinor1990]

when you cut of the blue foam after you lay down te planks there is no room too expand between the planks and wall thats oké ??

[@atillausta8514]

Dizlik kaykay güzelmiş ustam kolay gelsin

[@DePeaceHunter]

Hi, If it's ok to lay the vinyl sheets directly on a granite floor without any foam sheets?

[@nikolahlad7260]

Noo... In this video the vinyl sheets have isolation on them... Thet black stuf on the back

[@jrsjesus1]

Instalação perfeita! Quanta dedicação nos arremates. Parabéns pela instalação uniforme (sem interrupção de ambientes).

[@bulentyildirim5951]

Richtige Profis im Einsatz 👏

[@aynuryilmaz4676]

Wie nennt sich das Werkzeug mit denen Sie die Leisten anbringen? Super LEISTUNG DANKE FÜR DAS TOLLE VIDEO

[@mercedesmunoz2011]

Hola, qué tipo de rodapié es ese que se puede amoldar a las esquinas y va apintillado. Agradezco tu respuesta. Magnífico tutorial

[@ЮрийЖучков-ю4б]

Мастеру респект. Супер

[@jacksmit8322]

Vincent. Smit

[@gregoiregomis7099]

C'est dû bon travaille bon courage

[@angelodhont7805]

Welk product (würth) in de spuitbus gebruikte je op de aangebrachte keramieksilicone? Alvast bedankt!

[@vageliskatsouras]

azax

[@art-decodesign4850]

Ça ! ....., c’est exactement 🧐 un vrais professionnel.... 👍🏼👍🏼👍🏼 ta vue la dextérité du pro.., quelle vitesse il fait ces coupes et découpes 😏😕😔.. Sensei !

[@DobroMIR1515]

лайк! один вопрос, что за средство и как называется , которым удаляли лишний силикон (герметик) ?

[@easypainterslondon]

good info quality work

[@sorinoprescu4702]

Hello, beautiful work. What is the name of the song from min 38? Thanks

[@Wvillegas816]

What is the machine you used to cut the moldings? Great video. Enjoyed it!

[@giannibado8258]

kzbin.info/www/bejne/anmwpKVoo5ulq68

[@giannibado8258]

It is that tool

[@silmarcassio9588]

​@@giannibado8258 Freund Wie kaufe ich diese Maschine, um die Fußleiste im 45-Grad-Winkel zu schneiden? Haben Sie den Kontakt des Unternehmens, das die Maschine verkauft?

[@Innocentah]

Sehr gute Arbeit

[@vwpassat2507]

Habe genauso verlegt. Nun gehen aber nach nicht einmal 1 Jahr die kleinen Querfugen auf. Was kann man dagegen machen?

[@flooringtv]

깔끔한 설치 잘 봤어요...

[@euroovca25]

i would definitely cut the floor so that the small pieces (left overs) are not used in the corners!!!!! it looks bad and im not sure that the maker of the floor allows this...

[@tvdiamondlifetv2828]

33:35/38:24 Which brand model of the molding cutting machine that comes out? I want to have it so much. Thanks for letting us know. (What can I buy on Amazon & eBay?)

[@giannibado8258]

kzbin.info/www/bejne/anmwpKVoo5ulq68 cutting machine

[@Rose.CH24]

Hola. Podrías decirme qué producto usas en spray de marca Wurth, al final del vídeo y para qué sirve? Muchas gracias. Saludos desde España.

[@Cata2984]

saludos , estuve viendo unos productos y creo que podría ser eliminador de restos de silicona en aerosol

[@ksenos69]

Verdammt gute Arbeit!

[@breebomb]

Hi! Nice Job. I follow all your videos!! Can U tell me what brand is that tool for the knees?? Thanks

[@nev112]

What did you do with the bleu on the lower walls

[@Uz_e_does_it]

That hardest part of LVP floors is the prep & making sure everything is level. Cause it's so thin & will flex without a somewhat smooth surface

[@franciscovalencia8881]

perfecto vato is great congrats simple y limpio nice

[@mikejames663]

What did you spray on the silicone to get it off with ease at 37:00 and on. Great job.

[@ohdeckrails1123]

Windex will do samething.

[@yenovkpashalian2863]

Its funny how they make it so easy.piece of cake.

[@tientranmanh5878]

Can you show me where to buy the 330mm design cutter vinyl floor cutter

[@אביבהממוק-כ2מ]

Very nice job

[@elisejajredinovski5581]

Juste 1 questions on est obliger de partir de centre ou pas ?

[@levyrodriguesdesouza8691]

Qual o nome dessa maquina que vc esta usando para cortar o rodapé?

[@daniperezgarrido247]

Hola tengo una duda , si quiero conservar los rodapies de la habitación donde lo quiero poner es necesario poner los separadores esos?

[@Rose.CH24]

Esa duda también la tengo yo...

[@maricruzdelarosa7770]

wow you did a great job i need the name of the molding machine I like the way you did it thanks for the video

[@giannibado8258]

Molding machine>>> kzbin.info/www/bejne/anmwpKVoo5ulq68

[@yisa8148]

Hast du sauber gemacht 👍

[@thorstenhencke1853]

Was setzt der für kurze Stücke am Ende🙈 Wo ist die Dämmung?

[@monsillezet1517]

What tipe of spray you use to clean the silicone great job

[@danielamesbury1712]

Washing up liquid and water mix 👍

[@silmarcassio9588]

​@@danielamesbury1712 Freund Wie kaufe ich diese Maschine, um die Fußleiste im 45-Grad-Winkel zu schneiden? Haben Sie den Kontakt des Unternehmens, das die Maschine verkauft?

[@chicointeligente1973]

Mucha gracias por la información amigo.

[@李萊恩-h1h]

What is the tool he use to move to protect his knee？

[@r.c.850]

MAXXHAUL 80748 Rolling Knee Creeper/Pads with ABS High-Impact Frame, 5 Swivel Castors, Tool Tray and Holder

[@silmarcassio9588]

De que país vocês são? Como posso comprar essas ferramentas? A ferramenta de cortar o piso,e da de cortar o rodapé

[@juco1978]

Prachtig, zo werk ik ook, alleen bij doorvoeren, zorg ik ervoor dat het pvc echt rond de doorvoeren zit. wat doe jij er tussen in nu?

[@djeshb1721]

Hoe heet dat apparaat waarmee hij de plinten snijdt?

[@ΓΕΩΡΓΙΟΣΜΠΕΛΤΣΙΟΣ]

Στα τέρματα δεν πρέπει να αφήσεις περιθώρια τουλάχιστον 5 mm για τις διαστολές ? Με την παραμικρή διαστολή δεν θα φουσκώσει όλο το πάτωμα ?

[@drNVL]

Por Diosss! Perfección total!

[@Astroboy1957]

Excelente trabajo!

[@silmarcassio9588]

Freund Wie kaufe ich diese Maschine, um die Fußleiste im 45-Grad-Winkel zu schneiden? Haben Sie den Kontakt des Unternehmens, das die Maschine verkauft?

[@rickkrieger4455]

What kind of base is that? I've never seen that molding cutter before. Nice!

[@fabiomagalhaes5148]

Esse é o piso vinílico ou laminado? Pois parece ter o modelo do laminado com testura do vinílico.

[@allansun4449]

What is the name of the skirting cutter?

[@ВячеславМясников-й9ь]

Музыкальное сопровождение можно было подобрать удачнее, а так все классно👍

[@djeshb1721]

Where to buy to cutting machine for woodpieces?

[@momokapor8498]

Goed job respect from morocco

[@gmjacabamentospisosquentes9050]

Que rodapé é esse e que máquina é essa q vc usa

[@ryantonugroho5124]

Bang vinyl click kalau rusak / retak di tengah cara memperbaiki tanpa membongkar semua nya gimana ?

[@josecastanararroyo4553]

Como se llama la máquina que usas para el rodapié?donde puedo conseguirla?

[@moussadionga8519]

J’aime beaucoup ce travail magnifique avec beaucoup d’expérience 🙏

[@marcelojesus8599]

Gostei do seu vídeo está de parabéns.

[@cesarotrtez23]

cut in the end of the wall is 8 inch minimun....not 2.

[@tonyyaa5813]

Meister Leistung 👌

[@sarahkossack6284]

Mega geil

[@ladyace2500]

What is this machine to cut this molding?

[@giannibado8258]

kzbin.info/www/bejne/anmwpKVoo5ulq68

[@giannibado8258]

Grugeoir romus is the tool kzbin.info/www/bejne/anmwpKVoo5ulq68

[@johanapastorkova4370]

Sice prace super, ale neldite vůbec tu barevnost lamel, asi bych nebyla spokojený zákazník, jinak super... Časově a dobře....

[@naetube1198]

Please.. What product did you use when you apply silicone?

[@sebastianfiedler8764]

Otto Chemie .. for me still the best product

[@Rose.CH24]

Qué es Otto Chemie ? No entendí la traducción. Muchas gracias. @@sebastianfiedler8764

[@joshuavictor4593]

why did u use nails instead of glue? any reason?

[@petergyongyosi3147]

Professional work

[@李博昇]

Where to buy the cutting machine

[@tonistjepic4408]

What is tool that you are using for angle cuting of skirtingboards

[@giannibado8258]

That is the tool >>> kzbin.info/www/bejne/anmwpKVoo5ulq68

[@noahpark2520]

Great job!!! What's the name of molding cutter &

[@giannibado8258]

Grugeoir Romus kzbin.info/www/bejne/anmwpKVoo5ulq68

[@javiermontano3538]

Como se llama esa herramienta de cortar el rodapie

[@fiestaautoinsurance6519]

wurth sealant smoothing agent is what he used to help smooth silicone. Cant find it in USA. :/ anyone know any alternative?

[@ElectroImp]

what's your Skirting cut tool name ? how i find ？

[@bboyslimek]

www.doellken-weimar.de/en/products/tools/mitre-tool/

[@rogerchm2720]

Good job

[@TheUkGrimekid]

What do you spray on the mastic at the end of the video?

[@lahoucine]

dish soap + water

[@plitochnik_Kizilyurt]

Просто зверь мужик👍👍👍

[@aleksandar71]

Bravooo👍👍👍

[@tixon194]

si si, muy bien explicado....

[@binhcam9512]

So good

[@chowchowzhou4863]

At beginning was wrong ,did not leave the gap to extend

[@donb9139]

blue foam around the walls may give enough to expand and contract ?

[@Koobitza1]

Witam.Gdzie w Polsce mogę zamówić poziomowanie podłogi i takie panele?.Pozdrawiam

[@orhankeles3799]

ülkemizde de işini böyle teknik yapan ustaların çoğalması dileğiyle

[@aqui36]

Bravissimo...