well done lads my land lord is so cheap been making excuses for months about doing fascia's told him last night iv had enough ill figure it out myself with a youtube guide video.
@yvonne.stewart27453 жыл бұрын
Yes I'm thinking of doing it myself along with my daughter. My front and side where I can reach not to high. Scared of height. I've learn a lot watching KZbin. Me and my daughter changed the pipes to my the main drain cast iron by watching KZbin. Saved myself about 7,000.00 dollars. About 5 years ago and no more problems since.
@robertpilkington44425 жыл бұрын
How can you fix new soffit over rotten roof timbers, these should be replaced /repaired and treated with suitable wood preservative prior to the replacement taking place
@CurvedSlightly4 жыл бұрын
TrADIES, THEY DO LITTLE AS POSSIBLE. i BET THEY CHARGED FOR REPLACING THE TIMBERS THEN DIDN'T BOTHER "yEAH LOVE WE REPLACED EVERYTHING..."
@Benzknees4 жыл бұрын
It’s alright, the firm will be long gone by the time the householder realises the problem, and that the rest of the timbers have also gone rotten due to the plastic stopping the timbers breathing.
@ryanh32856 жыл бұрын
I thought the verge tiles had to be mechanicaly fixed now and was expecting them to use dry verge instead.
@stephenwivverp55992 жыл бұрын
Good point. Verge tiles would have been mechanically fixed or nailed in layman's terms in days gone by but if a dry verge system is incorporated (now a standard practice) to the build the dry verge units or continuous dry verge system will hold verge tiles securely in place therefore eliminating the need to nail down tiles on the verge. And just who beds down and points verge tiles on a roof these days? CAVEMEN!
@TheSubpremeState5 жыл бұрын
how is it going to be able to expand if its superglued on the joints??
@mde19535 жыл бұрын
The glue still gives and expands
@TheSubpremeState5 жыл бұрын
@@mde1953 while you're there. Why are soffits not run parallel to wall? Would save a lot of cutting
@mde19535 жыл бұрын
@@TheSubpremeState Rafters protrude through the wall plus it allows tile overhang into all the guttering work if not it would just be wood anyhow
@TheSubpremeState5 жыл бұрын
@@mde1953 yes but can I put a 5 metre length up in one peice ?
@TheSubpremeState5 жыл бұрын
@@mde1953 I think u misunderstood my question. As far as I've seen the soffit is cut in to small pieces and fitted side by side. Why not run one peice with the grooves in the same direction as the wall?
@docmatt6 жыл бұрын
Come on lads, don’t use hollow on a huge overhang like that, use a solid 150mm shiplap instead. That will bend all over the place when someone tries to clean it.
@timjones73705 жыл бұрын
What are you on about? Shiplap gets used for cladding. Not Soffits ahahaha
@taffytop3 жыл бұрын
No it will not
@yvonne.stewart27453 жыл бұрын
Do you need a permit to do this work yourself on your own house?
@bobbycrispy5459 Жыл бұрын
No , the fact u need to ask says to me that you shouldn’t do it bye yourself unfortunately
@wiganer9912 Жыл бұрын
@@bobbycrispy5459 The fact that you spelt ''by'' as ''bye'' says to me that you shouldn't be giving advice.
@bobbycrispy5459 Жыл бұрын
@@wiganer9912 who gives a fuck how I spelt bye
@sharicelopez51956 жыл бұрын
How much does something like this cost to do yourself?
@paw71104 жыл бұрын
Yo Haze £12.50
@CurvedSlightly4 жыл бұрын
"Eh, Dan. we need do a good job as we're on camera. No dodgy scam tradie jobs like we normally do then fuck off home leaving behind a shit job a mess and ripping the customer off..."
@amdistant5547 Жыл бұрын
Houses in Britain used to be rock solid but thanks to cheap American construction materials, they're now making more and more things of cheap grade plastic.
@andrejsarhipovs15426 жыл бұрын
Where are soffit vents??
@Landofhopeandglory5754 жыл бұрын
They fitted strip vents on the tops of the fascia boards. It was in the video.
@taffytop3 жыл бұрын
Not necessary
@fungames243 жыл бұрын
@@taffytop It is necessary. On my leaking roof, the roof felt is designed to drip water into the soffit and soffit let the water out from vents at the bottom.
@richgoodman57346 жыл бұрын
On top of the facial board
@jaggiguru31275 жыл бұрын
This pvc board not long life
@Petertronic4 жыл бұрын
Looks flimsy.
@criartoros4 жыл бұрын
Let's see your video, see how good you are
@Petertronic4 жыл бұрын
Ooooo meow!
@paw71104 жыл бұрын
ForestCat_Peter meow indeed 💅🏻💅🏻
@fungames243 жыл бұрын
Not only looks flimsy, it is actually flimsy. When the wind blows, it will be hard to get to sleep.
@CurvedSlightly4 жыл бұрын
Wipe it down, yeah right as if these scamming wankers would do that!