Extremely good video. I'm a novice and it helped me choose product and how to fit. thanks
@dantube4208 жыл бұрын
That's some of the clearest information I've seen on a KZbin video. Well done and thanks
@PBSLGroup4 жыл бұрын
Thanks for your comment, we're glad we can help!
@orlandob9958 Жыл бұрын
If only every info video was like this one. After watching video after video of guys talking for 20 mins plus i was still lost about pvc fascia.. this guy cleared everything up for me in less than 3 minutes and I’m already starting my project
@PBSLGroup Жыл бұрын
Great to hear and best of luck with your project!
@CHYPCARАй бұрын
Excellent explanation of the relevant components. Thank you!
@bram76598 жыл бұрын
fantastic video. Just what I needed. Thank you!
@PBSLGroup4 жыл бұрын
Thanks for your comment, we're glad you found it useful!
@opentrail4 ай бұрын
Fantastic explanation. Thank you!
@KF-bj3ce4 жыл бұрын
Thanks for the reply about re-cycling
@PBSLGroup3 жыл бұрын
No problem!
@jayfbee8 жыл бұрын
Well done.. good video. Thank you.
@PBSLGroup4 жыл бұрын
Thank you!
@Anonymous-si7oc6 жыл бұрын
Very useful and informative video. Thanks guys!
@PBSLGroup4 жыл бұрын
Thanks for your comment!
@lalabro.6 жыл бұрын
Well explained .. thanks learnt new thing.
@PBSLGroup4 жыл бұрын
We're glad it helped you!
@futurecarslondon11095 жыл бұрын
Superb information.
@PBSLGroup4 жыл бұрын
Yes, that is the way we would do it in practice, we agree that it does look cleaner. Remember to only glue one side though to allow for expansion.
@bryanhannaford46194 жыл бұрын
Nice video, thanks.
@PBSLGroup4 жыл бұрын
Thank you!
@Senna-xi1gr Жыл бұрын
Cheers mate, just about to do mine. 👍
@paulknowles9681 Жыл бұрын
I understand fascia board covers they're fairly self explanatory but can you explain combining fascia cover boards with soffit cover boards with vents please.
@DanielPaprocki11 ай бұрын
So useful! ❤
@DerekTJАй бұрын
Is there a such thing as cedar soffit? If so, are they high maintenance?
@rorygray29752 жыл бұрын
Here in South Africa we only use 9mm fascia & Barge boards fixed straight onto eves/battons.
@MrKanga12312 жыл бұрын
Very clear information, I would however be very disappointed if someone fitted my fascia with so many polytops, it looks bloody awful. I would rather have to maintain timber fascia than live with that. Sorry.
@patrickhancock16 жыл бұрын
Nice Video.. Thank you
@PBSLGroup4 жыл бұрын
Thanks, we're glad you found it useful!
@JVIMTMАй бұрын
So fascia is same thing as eaves??
@terencemurphy22923 жыл бұрын
Brilliant vid, I have searched everywhere but cannot find any information on how high you should set the top of the facia board above the rafter. before setting the overhang of Redland 49 tiles. any advice appreciated / Many thanks
@PBSLGroup3 жыл бұрын
Hi Terence, thanks for your comment. The fascia board isn’t strictly supposed to support the bottom row of tiles, this is the job of the tilt fillet shown in the video. The tilt fillet effectively changes the angle of the bottom row of tiles and locks them in place. The fascia board should sit slightly below the top of the tilt fillet.
@Petertronic4 жыл бұрын
In another video they superglue the pieces that cover the expansion joints. Surely this defeats the purpose of the gap? Or are they only glued on one side to allow movement?
@colinevans63784 жыл бұрын
You are correct, they should be glued on one side and sealed with silicon on the other side, which will allow for any potential movement.
@johnbower Жыл бұрын
@@colinevans6378 Don't try and kid me into thinking the silicon will move 10mm with expansion without breaking loose .
@michaelwarwick99306 жыл бұрын
10mm for longitudinal (presumably) expansion of UPVC fascia boards? Over what length? And under what temperature change? And what happens at all those fixing points on each length? On heating does the board material compress locally at each nail/screw and then magically expand again (without damage to either the board or the fixing) when the board cools? I await your answers with bated breath. ;-)
@gbwildlifeuk82695 жыл бұрын
Shut the fuck up you arrogant twat
@sinista65365 жыл бұрын
Michael Warwick Wow, Michael knows everything EVER
@PBSLGroup4 жыл бұрын
You should allow a 10mm expansion gap between two 5m long boards. This will allow for the most extreme temperature ranges that we experience in the UK
@johnbower Жыл бұрын
@@PBSLGroup so the fixing nails close to the ends of the boards have to bend back and forth 5mm with every expansion and contraction of the board, so we hope no one thinks of that then that problem goes away.
@bullfrogjnr46283 жыл бұрын
can you send link to video for the box end that you mention in this clip
@PBSLGroup3 жыл бұрын
Hi, here's a link to the video that you requested! kzbin.info/www/bejne/aHayZ39tjLSMjLM
@bephremb Жыл бұрын
Do you do a scalloped fascia board?
@DavidJones-hi9bg7 күн бұрын
Poor corners and joints should hide all cut edges
@EvaHaberlova4 жыл бұрын
Thank you for share . I need fix our house pvc soffit and fascia . I am looking contractor . I ask u how much will be cost all new pvc soffit and fascia ?? The house is 1888 sq .
@PBSLGroup4 жыл бұрын
Unfortunately it is impossible to give you an idea of cost of materials without seeing the house or the roof plan. Any local builder or fascia installer should be able to give you a rough idea of cost though if you are not confident taking on the job yourself.
@gavincavell29905 жыл бұрын
Really informative video, regs the soffit boards, how do you attached to the wall? Standard batons attached to the wall or do you supply fittings?
@PBSLGroup5 жыл бұрын
Hi Gavin, thanks for your query. Cellular Soffit Boards (Plain and Vented Soffits) are installed and fixed to the bearers using 40mm A4 Grade Stainless Steel Polytop Pins. Polytop Pins are both shorter and a smaller gauge than polytop nails, due to the fact that soffit boards are never load bearing. The heads are also smaller, making them less obtrusive. Soffits should be fixed with two pins at 600mm centres (400mm for woodgrain). Hollow soffits are secret fixed to soffit bearers using 30mm stainless steel cladding nails. The lip of the board is nailed, with the fixing being covered by the next board.
@booshallmighty7 жыл бұрын
If the boards expand so much, are the screws or nails placed in slits?
@glenwhyte25557 жыл бұрын
Craig Harrison the nails that are normally used are called poly pins.. (a nail with a bit of white plastic on its head) pilot holes are drilled in marked out positions and then nailed on. So the answer to your question is they are not in slits. Hope this helps.
@PBSLGroup3 жыл бұрын
Hi Craig, thanks for your comment. In the past some old PVC systems did incorporate slots for the fixings, but over time the system has evolved to be used as explained by Glen in the previous answer. The whole system therefore expands and contracts around the fixings.
@jamesaldous33595 жыл бұрын
If fixing guttering to cover board, what fixings are recommended to ensure they are adequately supported? Thanks
@PBSLGroup4 жыл бұрын
The screws for the gutter brackets should go through the cover board and into the backing board. 25mm screws should suffice.
@junebaynham2408 жыл бұрын
help, would you know how to fit conservatory roof into where roof tiles will meet roof tiles,fitting it in to barge board space, not got a lot of fall on our conservatory roof as it is, no room left for guttering to go back on ?so it will go onto conservatory its self,
@PBSLGroup4 жыл бұрын
Thanks for your enquiry, could you send us an image of the exact site so that we can take a look and hopefully give you some advice? Do please send us an email to sales@pbslgroup.co.uk
@benmorgan52894 жыл бұрын
Is .75" thick enough to attach on its own?
@PBSLGroup4 жыл бұрын
Hi, please could you clarify your question?
@Lee-wx9zp6 жыл бұрын
Y do u polyp in corners I use superglue n activator n looks much cleaner finish
@PBSLGroup4 жыл бұрын
We actually agree with you here, the guy who built this model for us was over-enthusiastic with the polypins - superglue gives a much neater finish on the trims.
@Boneskinmachine6 жыл бұрын
Why can I find nothing like this in the U.S?!! I want that beveled edge, slotted, and thick enough to hold a gutter. It appears it is a Euro thing but it is clearly better than the wood and aluminum and vinyl wraps sold here. What I do?!
@PBSLGroup4 жыл бұрын
We hope you manage to find something similar near you!
@PBSLGroup4 жыл бұрын
We agree with you - eaves construction is very different in the U.S. and for the most part it is much lighter duty. One of the reasons may be climate - PVC expands and contracts much more than the materials used over there when it is exposed to extremes of heat and cold, which we don't tend to have so much of in the UK.
@JohnKing-cc8fp4 жыл бұрын
Fascia should be at least 60 mm above the spar ends
@PBSLGroup4 жыл бұрын
Thanks for your comment, you have to be careful here as there are several different factors that can affect this. Many fascia boards in the UK are not strong enough to support the weight of the bottom course of the roof covering, so what you suggest is OK as long as the tilt fillet still carries the the load.
@siphenkosimakrwede6799 Жыл бұрын
🙏🙏🙏🙏
@KF-bj3ce4 жыл бұрын
PVC has not been a good solution for guttering as it will get brittle with age and has questionable UV protection unless painted, and rightly the massive expansion rate. What about Colorbond properly installed! or Timber with an oiled finish!. Also the look of it, like living in a Tupperware party. No thanks
@PBSLGroup4 жыл бұрын
Not everyone likes the look of PVC - it comes down to personal choice. PVC Gutter manufacture now is far more advanced than it was 20 years ago though, with long lasting looks and durability. Like all industries it has developed over time, and the now brittle or faded gutters that were installed 20 + years ago are a thing of the past - just make sure you buy from a reputable manufacturer.
@KF-bj3ce4 жыл бұрын
@@PBSLGroup Yes but what about the recycling, does the PBSL Group have a program where this product can be returned after life and not get buried in to the ground?
@PBSLGroup4 жыл бұрын
@@KF-bj3ce The recycling of plastics is becoming more and more common, with many materials including now being manufactured solely from recycled PVC.The British Plastics Federation is also actively involved in PIRAP, which is the Plastics Industry Recycling Action Plan. PIRAP was set up in June 2015 to help meet the 57% plastic packaging recycling target by 2017. The end target date has now been extended out to 2020 - whilst we are making good progress as a whole in this area there is still a challenge for industry in general as further infrastructure development is needed.
@spilleradam2 жыл бұрын
I’ve used this stuff, it’s horrible and cheap .
@nkel61117 жыл бұрын
fucking english bloke...talk 'english'. give numbers in inches, the shitty system you gave the states.