Flosstube Lowery Floor Stand

[@sharonpatnode454]

Great video

[@solarwinds-]

Your demo was REALLY helpful. You showed it using a recliner, you used with a Quantum frame, you showed me that I DON'T need the extender bar, you showed how tall/short it goes and you showed that the powder coated was the same. Very thorough demo, thank you thank you thank you so much! Answered all of my questions.

[@gracenotesstitchers-corrin6784]

Oh, I’m so glad to be able to help!

[@solarwinds-]

@@gracenotesstitchers-corrin6784 Do you find the head of your lamp keeps falling down or does the head stays where you put it? Thank you for your response.

[@gracenotesstitchers-corrin6784]

@@solarwinds- my lamp stays put, the daylight omega 7. I have an off brand I take to retreats. It falls constantly, until I get the right angle and tightness. Then I can get it to stay.

[@solarwinds-]

@@gracenotesstitchers-corrin6784 ❤🧡💛💚💙💜🤎

[@tammybunge5615]

Thank you for the tutorial I had put mine off to the side, I'm going to dig it back out😊

[@gracenotesstitchers-corrin6784]

You’re welcome. I had another thought. If you had a good, heavy weight, you could turn the base plate sideways. Then you could swing the arm over you when you sit down.

[@JennsWorldofStitches]

I love my Lowery stand. I got my Lowery at Charing Creations and the fabric also! I use qsnaps in mine and definitely love it!!

[@gracenotesstitchers-corrin6784]

Yay! Yes, the lowery is awesome! I’m glad you love yours.

[@katythompson3428]

The stainless steel model is the deluxe model and is a robust unit and heavier than the powder-coated models, at least this is what I felt was implied on my research before I bought the SS version. I think this is why the stainless steel model is less likely to tip. However, as I have not seen a powder-coated model I have nothing to compare to my SS model.

[@gracenotesstitchers-corrin6784]

Not exactly - they operate the same. Deluxe would imply extra features, and now I have both….they have exactly the same features. Honestly, the silver grey is not going to tip if you hold onto it when swinging in and out! Of course, in carpet you have to be more careful.

[@bugsxstitchincanada3664]

Fantastic video and Lowery review! ❤️

[@gracenotesstitchers-corrin6784]

Aww, thank you!

[@DoretteJansen86]

I love this video, after watching it, I finally bought a lowery stand! Thanks for that. Can you please tell me what lamp you have and where to buy it? I really like the tablet holder and charger...

[@gracenotesstitchers-corrin6784]

Thank you. Yes, it is a floor ottlite that had the tablet stand as part of the lamp itself!

[@phylliszimmerman444]

Thanks for sharing

[@luckygardeniasdashboardcon9214]

Happy to run across your Flosstube Channel... My KZbin Channel started out as a Flosstube Channel and drifted into a Life Update Vlog... My Love for Cross Stitching has returned and I am moving back to a Flosstube Channel! Thank you for sharing how you set your stitching space ... Lol I have just jumped over to Amazon to purchase the Otte floor lamp with the iPad holder and USB port ... I had no idea it existed! I already have a Lowery stand but I would love to know the Shoos where you purchased yours ( I may get some of the add ion’s and I would love to purchase a I believe the name is quantum find that you’re using so if you could and he replied that would be fabulous looks fine to catching up on all the last two videos you made with your lovely daughter thanks again Diane a.k.a. Lucky Gardenia’s Dashboard Confessional in Texas. p.s. about to start a head I bought several patterns because I couldn’t decide so look forward to doing that and saw your box opening of your HAED KIT thanks for sharing I really enjoyed IT

[@gracenotesstitchers-corrin6784]

I got both my lowery and Omanik quantum frames from a store in canada www.Busxstitch.ca. Alicia is the owner and really nice. I am so glad to hear you are back into cross stitching. It has been my passion for about forever...I had walked away for a few years due to my hands, but so glad I am able to be back to stitching. Thanks also for watching our videos. We have so much fun making them together. Which HAED are you going to start?

[@luckygardeniasdashboardcon9214]

@@gracenotesstitchers-corrin6784 i’m gonna tell you the HAEDS I purchased yesterday the patterns only... Mini treasure bookshelf... Mini World Travel BookShelf ... Mini Stitch in Time... *Mini Honey Bee Portrait... QS Bull Horse ancient Wall Paintings.. Faces of Farey #193.. #75.. #208 Grace Faces and Mini Paisley.... I haven’t decided but most likely either Faces of Farey #193 or Grace Faces (the middle one) or I really like the Honey Bee Portrait. Teresa Little Stitcher ... I love her Flosstube Channel ... her 1st HAED’s Farey 193 then Graces Faces ... it’s going to start out with a very small one .... Unlike you who is brave enough to take on the large Treasure Hunt Bookshelf!

[@luckygardeniasdashboardcon9214]

@@gracenotesstitchers-corrin6784 There is one more in the running ... I already had this Hard pattern.. Holly Angel by Jasmine becket- Griffith.. the Angel has platinum hair and do so I LOL

[@gracenotesstitchers-corrin6784]

@@luckygardeniasdashboardcon9214 I love Jasmine Beckett Griffith. Don’t have any, but they are adorable. I have the mini world bookshelf, but I believe I will be doing a larger version. I will be completing my mini Mulan this year, and am so excited!!!

[@lucinalucina4350]

Thank you for the very useful video. What was the name of the little things you put under the metal grips of the long frame Lowery adapter to protect the fabric please? Did you say they were magnetic? I’ve tried small pieces of Aida and pieces of cotton but they are fiddly to hold in place when you’re trying to insert the frame into the adapter.

[@gracenotesstitchers-corrin6784]

I have a magnetic grime guard that I got off of Amazon. A friend made me a second one :) I’m glad it was helpful!

[@crazybandladystitches-xanl5148]

😍

[@fluffyminx08]

Could you tell me where to order the wood back clamp for larger projects :)

[@gracenotesstitchers-corrin6784]

Yes, of course. It is called the long frame adapter. This is a link for all of the accessories at Bug XStitch. I usually order from her. bugsxstitch.ca/?product_category=&s=Lowery&post_type=product

[@tammybunge5615]

The problem I have is my recliner is solid on the side so I can't slide it under, any suggestions

[@gracenotesstitchers-corrin6784]

If you have the longer L bar, then it wouldn’t have to be as close to the recliner. But, there are some people who purposely slide it under the couch or recliner so that it holds it down. I’m not sure if that helps?

[@tammybunge5615]

@@gracenotesstitchers-corrin6784 I will try that, I do have the longer bar. I got frustrated with it wanting to tip over so I will try something heavy on base thank you for your tips

[@dfrogers831]

Is that website still online? I can’t seem to find her store?

[@gracenotesstitchers-corrin6784]

I don’t think it is…I actually sell lowery now! Www.GraceNotesFabrics.com

[@jmom3586]

How do you use the light adapter?

[@gracenotesstitchers-corrin6784]

I use the light bar by sliding the lamp into the holes - I don’t use the clamp that comes with the lamp.

[@terrilynn9817]

hi. what is the frame you are using

[@gracenotesstitchers-corrin6784]

It’s an Omanik quantum frame