FLOWMASTER 44 ON CUTLASS WITH 455 ENGINE

[@stevenallen6245]

Olds power💪🏾💪🏾 I'm glad you didn't put a chevy engine in it ..

[@an_auto_addiction5742]

Steven Allen for sure going to run the 455 as long as possible. Thanks for watching

[@decarriorichardson3312]

gm makes these motors

[@stevenallen6245]

@@decarriorichardson3312 yes sir👍🏾👍🏾💪🏾💪🏾

[@eddieschwab864]

@@an_auto_addiction5742 gotta luv an Olds. Running a 73 455 in my 83 Cutlass... probably not near as hot as what you got in yours but it's still a helluva lot better than those cars came with from the factory...

[@dubvisionz89]

This is funny cause I have a 455 in my chevelle lol

[@steve21061]

That sound makes me miss my '78 Cutlass. It had a 455 built with parts I picked out and the heads were shaved. It also had Flowmasters

[@drewt1081]

That's Sweet! I had a '79 that I put a '73 stock 455 in, it was awesome. it had a tall highway gear too, and I never found it's top speed.

[@lamontwhitehead1809]

Love it I got a 84 cutlass I’m planning on doing the same

[@an_auto_addiction5742]

Lamont Whitehead sweet man. I can’t wait to get mine done. Thanks for watching my channel

[@noahgaray7923]

Man, hope you kept the factory wheels. Slap those on for Sunday and it’s a sleeper!

[@an_auto_addiction5742]

Noah Garay for sure I still have the black Steelies with the beauty rings. 😆. Thanks for watching my channel

[@jackdome1281]

Nice I have an 82 Cutlass trying to do the same

[@an_auto_addiction5742]

sweet , stay tuned hopefully i can help you out. thanks for watching my channel

[@davenhla]

Nice car, glad to see people are saving the Olds! edit: That cold idle, you need to adjust the choke probably, there is a way to set the gap on the choke. Many of them have a little vacuum dealie on the side that keeps the choke cracked open just a hair once it starts. Some have an electrical one. If that gizmo doesn't work, the only thing keeping the butterfly cracked open is the air rushing past/manifold vacuum. If it is an older engine, it might have even had a manual choke you need to hook a cable to and put a pull knob in for(manual choke is easiest to deal with anyway)

[@an_auto_addiction5742]

davenhla thanks for watching and the tip. I can’t wait to get it out of paint. Miss driving it around. Brings back a lot of memories.

[@derrickjackson6737]

G body with a 455 V8 Big Block what type of transmission

[@sirmoshalot8665]

Just found a 81 with a 455 in it for 5500.00 Should I jump on it?

[@an_auto_addiction5742]

Sir MoshAlot if the paint and interior are in great shape then not too bad of a price I’ll have 3-4K in just paint work when I’m done with mine.

[@sirmoshalot8665]

@@an_auto_addiction5742 solid body, paint isnt my favorite color but not chipped or faded...I really like it but im trying not to let my love for the car outway better judgment in finance lol

[@sirmoshalot8665]

@@an_auto_addiction5742 just saw your 86 2020 update👍. My condolences on your 2019 bro. facebook.com/marketplace/item/374559820376862/ this is the link to the car I found, if you want to take a look.

[@an_auto_addiction5742]

Sir MoshAlot car doesn’t look too bad. Just a matter if you’re going to race it or drive it. No a/c or heat in that one. Body is straight. A little more than I would spend. And thank you again.

[@bigaparker1977]

Make sure you look under it I just bought one 5800. Wanted 6500. up here in Michigan tho it has light rust and a big hole in the trunk at the wheel well. . But a rebuilt 350 rocket, shift kit tranny. I cringe wren I look at that hole but imma fix it. The suspension set up was all new, all new tires SS2 wheels. I think it's worth the money.

[@devinirons]

I would like to know the exhaust manifold or part number or where did you get them from

[@soulfultenor]

I know where Ice Cold is....................... Yeah Buddy

[@an_auto_addiction5742]

Those guys were awesome. Thanks for watching my video

[@soulfultenor]

where are you ?? send an DM

[@BigGeorge3397]

Did you use the 307 brackets or 455 brackets to install that motor in your car? How did you do the air conditioner bracket? Finally, are those the 455 belts? I'm trying to install a 455 in my Cutlass Supreme

[@stevenallen6245]

I'm quite sure you know by now but just in case you don't the 307 brackets will fit and the engine mounts stays the same you don't have to change anything except that stock rear-end that will break as soon as you get down on it parts will be flying everywhere 😂don't ask me how I kno😅😂

[@soulfultenor]

Where are you in FL ??

[@poeki8891]

Sounds dam Good!

[@Grinder101]

I’m bout to drop a 455 in a olds 1984 98 it has a 700R4 transmission could it handle that power of a 455 or will I have to change the transmission

[@an_auto_addiction5742]

Big Dawg should be ok. I was thinking about changing my transmission one day just to get another gear to pick up mpg. I can go through a tank of gas in one afternoon. Lol. Thanks for watching my channel and good luck with the project

[@Grinder101]

An_Auto _Addiction much love brudda ✊🏽✊🏽

[@eddieschwab864]

@@an_auto_addiction5742 too many people don't understand that even a well-built 200 4r will hold up to a 455. Everybody always seems to think you need to go with a th400 or even a 700 R4, when they don't understand that the number on the transmission has nothing to do with the duty rating and everything to do with the changing transmission nomenclature by GM, heck they were putting those behind the turbo 3.8s in Grand Nationals. That's exactly what I've got behind my 455 in my 83 Cutlass.... about the only weak spot left on my Cutlass is the rear end still stock....

[@kingofkings8709]

I have a similar setup.... except I have a monte carlo....

[@an_auto_addiction5742]

Allen Mayrant nice 👍. Thanks for watching my channel. I can’t wait to get the car out of paint. Definitely going to be worth waiting. Have a great week

[@kingofkings8709]

Cool bro.... You're welcome, I am a big fan of the oldsmobile big blocks. Mine is in the performance shop, getting repaired after sitting for 15 years. You have a great week as well brother

[@donabercrombie8534]

2.5 inch id exhaust minimum for an Olds 455 v8...flowmaster 40 series muffs ftw

[@Luhsmooth10]

That mf sound like a 🐎 out of breath 😂

[@michaelrabatin2612]

Hey buddy sweet car wat Motor brackets did u use 307 brackets or 455

[@an_auto_addiction5742]

Thanks man I appreciate it, it has the 307 mounts.

[@eddieschwab864]

@@an_auto_addiction5742 got to love Oldsmobile V8 you can run anything from a 260 all the way up to a 455 with much of the same mounting hardware... I had the harder route to go because mine was originally a 3.8 car but I did initially swap to a 307....

[@stevenallen6245]

@@eddieschwab864 that 307 is easier to find I got an olds 350 in mines it was harder to find I got lucky with it 💪🏾💪🏾olds power💪🏾💪🏾307 is a good engine👍🏾👍🏾😁

[@eddieschwab864]

@@stevenallen6245 yes and no if I wanted to stick with 307 a good decent one I would have had to go about three states over from where I'm at in Kentucky at least based on the stuff that can be found online without trying to go through every Backwoods junkyard that does not do the online systems for parts listing. If I took the time to do that odds are I might find something fairly close but my job does not necessarily always give me the time to do so. But after the last time I resolved I wanted to make sure I built up something for durability not so much necessarily performance as much as making sure it holds up To that effect using gaskets all-around from Mahle, ARP fasteners for the mains rods and heads all the critical stuff as well as a few smaller things just to play it safe on the build to make sure it lasts a long time. Any performance characteristics to me on that are just a bonus..

[@stevenallen6245]

@@eddieschwab864 yes that is a good set up it will last 4ever good choice

[@fisherprice6012]

How's your mpg?

[@fisherprice6012]

Fighting with myself should I go LS or keep the 455?

[@jasonlavoie3986]

dame nice ride bro i love olds nice work sounds meeeeeeen lol

[@marshallmcdowell3369]

Where can I find a set of motor mounts and headers for this swap? I'm dying to do this swap. Great video by the way. Nice and clean cutlass. Not over done

[@an_auto_addiction5742]

marshall mcdowell the mounts are the 307 mounts. Blocks are pretty similar. The manifolds are stock they’re company that make a modified manifold that flows better but hugs the block. Thanks for watching

[@fjdimarco]

An_Auto _Addiction hi. Great car. Doing an 83 Calais now. But have some questions. Did you use 307 accessories and keeping the factory AC ? I’m hoping I can use all My brackets from a donor 307. Thanks

[@TSyoyo]

Frank DiMarco the ac bracket has to be modified to work. I had an 87 with this same swap. Sigh.. i has to sell it. Sucks

[@devinirons]

What exhaust manifolds are you using

[@bluestreakcutlass8494]

What serpentine system is that?

[@an_auto_addiction5742]

It is all the brackets from the 307 , they were extaded or spaced to keep the alignment, thanks for watching

[@mrsalazar928]

What kind of headers or manifolds did you use?

[@an_auto_addiction5742]

mrsalazar928 the manifolds are the stock ones for now. And they fit well. I will keep you posted. Thanks for watching my channel