Рет қаралды 9,394
Before the machine is started up, the fluid coupling has to be filled with the correct quantity of mineral oil of low viscosity. See other video list of approved oils for use in fluid couplings.
An equivalent oil may be used, provided that the manufacturer can guarantee it is an entirely suitable equivalent in every respect and that responsible for satisfactory operation is acceptable by them.
INSTAGRAM;- @thealokmantu
KZbin:-
IN LINE MAGNETIC SEPARATOR :- • SCRAP REMOVAL FROM CON...
WARNING : Great care must be taken that a mixture of oils is never used and that oil of different grade to that in the fluid coupling is never added.
The approximate quantities of oil required for
the various sizes of FLUID COUPLING are as follows. Based on max transmission power & 45 degree oil filling.
The exact quantity of oil will depend on the angular setting.
Two filling plugs are fitted to the fluid coupling plugs lies at the recommended filling angle from the vertical center line. Take out the plug and pour in cold oil to fill up to the plughole. Then screw the plug in again, with, its joint washer, and tighten securely.