Flying Fish W650 & Mobula Delta Wing FW650 | My Opinion

[@AdamGdoesFPV]

Nice video mate. I have a Flying Fish on the way, my plan was to make it a park fpv plane for a little proximity tree dodging. Light, small, quiet... less likely to upset anyone as it could be passed off as a toy from a local toy store 😂

[@AerialWaviator]

Great pair of reviews. Like you did basic light-weight setups for initial review and first maiden flights. Nice work on editing this video. Keeping it fun and focused. ♥️😎👍 Fun video snippet from 9:20 as a seabird chases the Mobula wing toward the camera. It might be be fun to revisit in a future video with a look at what space and what payload capacity is available for FPV gear and larger batteries. It does not necessary requiring doing a build setup, but perhaps just a bench discussion of some options. Possibilities for where to place camera, VTX, antennas, etc and theoretical weight.

[@peterdlynes]

Good reviews thank you.

[@димаватсон-у3п]

Центр тяжести сместить вперёд ?

[@JoeyGoose]

Nice review brother! I just had a Mobula arrive and was a little worried about how well it would fly given the low price (I paid $64 USD for the PNP on Banggood). Given your opinion and advice, I can't wait to get it in the air! Thanks for posting!

[@ramswaroopsoni9841]

I also make a glider it flys but only two times I made 10 gliders only one of them is fly so better and at last you are my inspiration love you ☺️☺️

[@tane388]

Nice video and very good sound quality!

[@SteveGergetz]

Did you have any crashes? And if you did, would you say that it was VERY durable in those crashes, or just average like other foam planes?

[@marielizysurourcq]

for the fish, I'm advising to try 2S with three blades FOUR inch props for lighter build. It will be lighter and get more power. You can also try the 3 inch FIVE blades for a better noise but less efficiency.

[@theoztreecrasher2647]

Sorry, but your information is certainly NOT correct! 2-bladers (of a similar type) are ALWAYS more efficient than multi-bladers.

[@marielizysurourcq]

@@theoztreecrasher2647 I thought I did say the same thing

[@theoztreecrasher2647]

@@marielizysurourcq It didn't come across that way. Perhaps Google Translate scrambled something in the conversion from your native language?

[@marielizysurourcq]

@@theoztreecrasher2647 I wrote directly in English and I am still surprised to be understood the opposite way :)

[@yobrojoost9497]

Good review and comparison. Would these fly with a Flysky transmitter?

[@Joyplanes]

Yes just use a FlySky receiver

[@scorpion1704]

Con solo ver el titulo me emosiona la clase de video

[@tims3471]

Hello i have a problem i built your plane and around 4 other planes but my planes NEVER fly. I put everything together like in your videos, i also look after the cg but my plane just twist around like it wants and i can never fly it. The plane comes direct down when i put it in the air. Please give me help

[@anujchandkapoor]

Finally someone who covers the fpv port and wants to fly line of sight like to old days. May i know which 2s battery did you use for the flying fish?

[@Joyplanes]

It was a 3S. 500 mah.

[@anujchandkapoor]

@@Joyplanes Thanks 👍

[@daviddavids2884]

observations. at 1:00, the mass of two servos has been located slightly aft, of where it should normally be. because of this, more attention should be paid to the forward-of-cg distribution of mass (dom). specifically, that mass should be counter-balanced with a similar amount of forward-located mass; at a location resulting in a roughly equal moment arm/leverage. a model airplane should have a prop that is correctly spec'd for the application. these rubbery props are Too flexible. this is so because, as a SF prop does, a flexible prop can un-load at higher rpms and/or during a major increase in throttle.!!! googletranslate btw, it should be CLEAR that, launching a pusher flying wing Can be dangerous, to the launcher's HAND. !!!

[@Stream486lavish]

I put a flight controller in it and a gps now its Autonomous you should try it and make a video!!!

[@Mateo-vl3zv]

I don't recommend throwing flying wings like that since you could easily cut your finger really bad, try launching it like a frisbee you can look it up on youtube , i have 90+% launching success rate throwing it like that

[@dronepilot260rc]

I’ve been hand launching like this for hundreds of flights no issues but I also played American Football 🏈 and know how to throw 🥂

[@Jkauppa]

try the dart tail sitter plane (also in my channel as a model), spin ducted jet instead of normal props

[@Jkauppa]

yes can be made easily as foam cross dart, two wings crossed

[@Jkauppa]

very stable

[@Jkauppa]

what, you serve the head that dropped to the ground, eh

[@rizen3467]

Ive seen multiple people struggling to launch the mobula wing, but you seemed to launch it easily. Also people complaining about tip stalls?

[@mikelarin8037]

Looked pretty solid, those turning loops he was doing is a great test for tip stalls

[@rizen3467]

@@mikelarin8037 yeah thats what ive been wondering. these other guys probably didnt have enough expierience with wings

[@randomguyinanglider4090]

3. comment-i hate winter. the weather is so bad i cant even fly rc planes and havent flown an IRL since three months

[@Joyplanes]

I know.

[@typxxilps]

Uhu is pronounced oohoo like in hoola hoop but oohoo . Uhu is a birds name in german for the eagle owl. Check google and press the speaker symbol. 4:24 Therefore you read it as Uhu Por on the box and in the green area below Styropor Kleber = foam glue Uhu is a very old mostly glue focussed company but they know how to glue and even lead to the development of a model plane in 1956 by GRAUPNER which close to all west german boys grew up with which then was called the small Uhu / eagle owl and of cause teached the boys how to glue spars (fuselage was plastic) and cover the wing. That is how the boys became 'branded' for UHU glues, simply by a plane which got the brands and birds name as a product name. Graupner ceased in 2018 or so finally and with it the 6 th generation of der kleine Uhu except from those dealers who still have them in stock. The plane was used to train the youth and start the first competition. So 2 or 3 decades later it is funny to watch all the RC plane channels mostly using the Uhu Por even in Australia where I had thought they would have had a complete different one from US or China, but for sure not a german one, but Andrew Newton loved Uhu Por and recommended it on his list. thanks for sharing all the work you had to do to fix the faults.

[@Joyplanes]

I love uhu for this kind of work.

[@kayezero703]

nice

[@utkarshsrivastava6218]

First comment

[@memed_sipalingfpv]

First like