Flying the DJI Neo with the RC2 Controller - Full Overview

[@MrJojo2go]

I just ordered the neo today!!!!! Soon there controller too!!! I haven't flown in many years but I been watching you for many many years!!! 👍🏻😃👍🏿🇨🇦🇵🇭🇺🇲

[@MrEye4get]

Great news, I'm ordering a Neo today!

[@MikeLockheart]

This drone has me so excited !! I just kinda wish it didn't sound like 1,000 angry bee's swarming LOL

[@ianm139]

That's the thing that puts me of lol

[@bobhope1084]

@@ianm139honestly the motor sound is awesome when flying looking at your screen it helps you better and will give you less anxiety because when your in a area that’s looks all the same you really have a better idea of where you are and this drone will make you a way better pilot I don’t even enjoy my nig drones sine I got neo

[@jorgonaut]

No work around that. It's just the physics of how small the props are and how fast it has to go to fly the drone.

[@MikeLockheart]

@@jorgonaut but DJI has magic technology. They can find a way. LOL

[@erniea5843]

It’s definitely louder than my mini 3 pro. But for the price, great value

[@drakejdf]

can you record audio with the rc2 like you can with the iphone?

[@limseehong]

Good info. Can I use the Mini 3 controller to fly the Neo?

[@threadlovert1393]

Excellent! My DJI Neo arrived yesterday. I look forward to taking it outside this weekend and seeing what I think. I have tried it out in the house. My shepherd does not know what to think about it and is uninterested; however, my Bichon/Poodle is super curious. I had to update the firmware on the Neo and connect it to my iPhone. After the update, I successfully paired it with my RC2 controller. I purchased another controller for the Neo. I already had one with my DJI Air 3. I only purchased the additional controller since when my nephew visits, we can fly simultaneously.

[@jmoney5690]

I know your nephew was happy about that other controller you bought

[@threadlovert1393]

@@jmoney5690 He was! So was I!

[@jmoney5690]

@@threadlovert1393 be been thinking about buying a second controller and headset so I can invite anyone to fly 😂👌🏾

[@highestvirtue1892]

Hi can I fly in FPV manual mode with the RC2 without the googles? Just looking through the controller LCD? Is this possible?

[@DaleF-tv6om]

Does the Neo have timelapse / Hyperlapse and way points?

[@GoogleXAVIERY]

I also will buy one but what is the range with rc n3?

[@MikeCorrigan1520]

Excellent video! Recently converted from Yuneec to DJI. Very impressed how this company seems customer focused. Unlike how Yuneec left their consumers hanging to go commercial full time. Anyway, bought the Neo… Should be here next week. Waiting to compare the Air 3s vs. Mav 4 for what I need to get the RC2 to ultimately fly both from same controller. Appreciate the video as it answered all my questions. Thx.

[@tcz7742]

Does the controller link up with the mini 4 or just the mini 4 pro. It would be great if it would become compatible with the Avata 2.

[@ferchobhives14]

Rick , i have a question, how do i get the different flying modes in rc2 flying the Neo, like the iphone does: following, helix, circle etc. any help will be greatly appreciated thank you

[@sreeshab4093]

awesome update. the DJI RC2 is it same as DJI Smart Controller?

[@BobLewen]

Hi Rick… just took delivery of Neo and RC2 controller…. Why 1080p 60 over 4K????? Also, Why H265 over H264???? And, do you have any recommended Camera settings for the Cini mode???

[@rljohn53]

Any news on the RC-N1 controller? I have the Mini 4K fly more combo. I am going to order the Neo. I am hoping DJI with have an update to allow it to work with the Neo.

[@Dronevalley]

Thanks for the post but nothing new yet and I'm constantly checking the firmware updates and asking DJI. Stay tuned and I'll post something if anything changes.

[@alexcavallaro160]

Great info Rick..I love when you get a new drone..❤

[@Dronevalley]

Me too! Something SO special when I get a chance to check out new tech. Stay tuned as there will be a LOT of new content posting.

[@LarryRichelli]

Sir, Are you sure that the NEO will work with the goggles 2 as I was told one needed the goggles 3.

[@shooter505]

Just got mine with the RC2. Had a little difficulty hooking to it, but finally got it after syncing to my iPhone first, updating everything, and then connecting to the RC2. Just curious...what video editing software are you using? Thanks for your dedication to the hobby!

[@kwekkelvin]

Can the Rc2 controller work with the Goggle 3?

[@Dronevalley]

Not yet. The only controller you can use it the new FPV controller and the new Motion controller. I'm hoping that DJI expands that list soon with new firmware. Stay tuned and I'll post a clip if that happens.

[@julianmclean3869]

Well done Ric!; just hope they also produce some low noise props !!!

[@gekoldronevideos]

Hi Rick, great Neo video about flying with the controller👍👏 I love flying the Neo with the RC 2 screen controller. Fantastic control on the drone. I did some flying in wind, close to objects and over water in my latest Neo dronevideo. I enjoy my Neo very much😀🇳🇱

[@RicardoJoseDorado]

Does it record verticaly?

[@Dronevalley]

Nope, it's a purely landscape drone with a single axis gimbal and EIS for stabilization. It's really designed for "selfie" videos mostly.

[@cms1172]

I was able to connect with both RCN2 and 3. The firmware switched on its own as soon as I tried to connect

[@Harleyboi04]

I'd really like to them include the NC1 as i wouldn't need to carry extra equipment around when flying either my Mini 3 Pro or my Neo. I hope DJI come to the party.

[@joseargonza7984]

How about just one controller, but different software you buy for each model drone?

[@SimonNeilScott]

I'm really hoping DJI looks at this situation and makes the DJI Mini 4K compatible with the RC2 controller. If they can make the cheaper and more budget friendly DJI Neo work with it, I really can't see why the DJI Mini 4K (arguably the next step up) can't do the same, and then remove the headache of using an app + mobile + controller.

[@jameswirthseo]

Thanks for the video, good stuff. Quick clarification for everyone: Neo uses occusync when using the controller, and Wifi when using the phone.

[@Dronevalley]

Thanks for the post but where did you find that detail? I have the pre-release documentation and have also asked DJI without confirmation. The reason I'm curious is that the tech for the Ocusync connection is expensive and I don't know how they packed it into a drone this small. Also O4 provides 20km of transmission distance and the Neo is limited to 7km. So if it's Ocusync it has to be a modified version to match the distance and cost issues.

[@delavic1]

The battery limits its distance

[@Cozydrone]

Thanks for the information !! 😀🤠🇺🇸👍

[@Dronevalley]

You bet, I'll have a few more clips posting this weekend

[@bogman192]

Wow. Great video. Thanks so much!

[@lynsmith1096]

Nice 1 Rick

[@MichaelB-YT]

I think I want this controller. I just don’t like to use my iPhone in combination with the stock controller, but I think I still need it for saving my videos? Or can I bypass my phone completely? Can I transfer the Neo Videos the this controller? It has a card slot I guess.

[@Dronevalley]

If you use the RC-2 controller with the built-in screen you won't need your phone at all. You can save the files on the drone or transfer them to the RC-2 for viewing. I like the combined controller since it makes it easier to fly and you can carry less gear.

[@tomhonsinger]

Pretty sure it's ocusync 4 I've had it out to 1 mile with no problems, could go further but the battery is half at that point

[@Dronevalley]

I thought so too but that would be expensive (and big) to fit into the small frame. You're a brave man flying the Neo that far out. It's a slave to the wind and I'd worry about cross-breezes. Thanks for the post!

[@IDNHANTU2day]

I'm trying to find out what ECO Mode is . And why they call it Quick Transfer. I can only manually (wifi) download one file at a time from the DREO to my phone.

[@johnzillah]

The Neo is ok but it wont work with my controller that came with my Mini Pro 3. Still have not purchased another controller. Hoping they will update the firmware.

[@Flyingramses]

Newbie question! Will using the RC2 enable me to fly Neo over water, so better contact compared to fly by WiFi cellphone? I assume the connection is more robust with RC2 but not sure if the limited sensors will always limit flying more adventurously. I feel a Mini Pro purchase on the horizon 😅

[@Dronevalley]

Thanks for the post and the controller provides a stronger signal than the standard Wifi from your phone so it allows you to fly farther. The water issue is related to the two TOF (Time of Flight) sensors on the bottom of the Neo that are used for stability. They get confused over clear or reflective surfaces and can cause sketchy behavior. The way to prevent this is to always stay 15' or higher when flying over water or snow because the TOF only applied when you fly lower than that. Have fun and be sure to check back soon for more content!

[@Flyingramses]

@@Dronevalley Fab, thanks for the great advice 👍🏼

[@paullawrence8572]

Good to know, thanks Rick!👌

[@glennwallaceweitz]

I downloaded DJI Assistant 2, connected my RC2, and it only gave my a choice for V01.01.007. V02.07.0000 is not available. I started up my NEO and RC2, but it’s not finding the NEO. What am I doing wrong?

[@Dronevalley]

Make sure you have the latest version of the DJI Assistant 2. They just updated it on 11/6 and the version you want is 2.1.30.1. When you use this one, connect your Neo and update and then connect the RC2 and update. That should get you going and if you're still having issues comment again and I'll try to help.

[@eumelzocker6880]

Unfortunately, it currently seems impossible to get a functioning RC2. Since a couple of months DJI delivers RC2s with a firmware bug that prevents activation (Server Error: -2). According to DJI support, the only solution is to replace the device. I have been a big fan of DJI but this issue has made me reconsider. Errors happen, but why are devices still being delivered to customers with an issue that's been known for months? That's anything but customer-friendly.

[@davidsimmons8545]

I also had an issue when trying to initialize the NEO with my phone and figured out the reason I was not connecting was due to using a VPN on my phone and once I turned that off it connected and updated. Maybe this will help some people trying to protect their info ect.

[@MrCastaicRCpilot]

Will the integra goggles work on this drone? I like this drone but I hate that it’s not compatible with anything. It’s $200 but by the time you’re buying new googles, new remote control you are over $1000. The avata 2 would be a better choice.

[@UncleDunk]

I bought a Min 2 Se about a month before the Neo was released. I’m disappointed that if I decide to buy the Neo, I can’t use the Mini 2 Se controller with it 😢

[@FQ8]

I'm hoping my mini 3 pro RC gets a FW update for the Neo🤞

[@aquwarium-_]

MINES COMING TODAY!!!!!!

[@Fn.by.Q]

Could i please have a neo i really wanted one for my bday but my parents said no because that cant afford it but mabye you can help me out!

[@RayRay-zc2ed]

If dji cared so much about its customers then why don’t they make the Neo compatible with the RC1 and the goggles and controller 2? I have the mini pro 3 and avata 1. They made the avata 2 compatible so I also bought an avata 2 and it flies great with the 2 equipment. So I believe if they wanted to they could make the Neo compatible with the same. No way am I going to spend money on a new controller or goggles just to fly the Neo.

[@adingadormeo8229]

They are now with the latest software updates 😊

[@Jumpy66]

RC2 and Avata 2 isn’t compatible this time. And I have a problem with the smartphone compatibility and Google 3. The cable connection didn’t work. I’ll hope they make an Update in the near future future. I don’t know why they need a cable connection in this time. You can realize it with Bluetooth too.

[@marijoprofabosnjakmatic1275]

Exelent

[@Dronevalley]

Thanks for watching! I'll have more Neo content posting this week.

[@MrJameric]

I hope they have a firmware update to include the older screen controller for the Mavic 3 Classic. I really don't want to buy a new controller.

[@vonheise]

I will agree and disagree with you about DJI being consumer minded. They were not always that way, and also they milk the consumer for every dollar they can. They release drones that are not yet a finished product, and that is not always due to more time or technology. The Mavic 3 was a ways from being market ready, and the Neo is not yet ready and I suspect the Neo Pro or Neo 2 is ready for production once the Neo sales slow. There will be a better camera, and maybe even side sensors, and other refinements. The future of consumer drones will be smaller and better now that we all spent the big bucks for the Mavic 3 and Mini 4 Pro.

[@HubsanChoice]

Only problem is that after the rc2 is switched off my NEO speaks chinese on its own ! Try yours?❤

[@Dronevalley]

I had that problem initially but with the .0300 firmware it seemed to stop. Give that a try and let me know if it helps.

[@HubsanChoice]

@@Dronevalley update makes no difference still speaks chinese I have to press the reset button in ABOUT on the rc2 everytime I use the rc2 before shutting down to make NEO speak english next time its used on its own 😍

[@mssippijim]

I really kind of wish I had bought an RC2 than goggles and motion controller...the drone doesn't have quite enough speed with the motion controller to make fpv exciting, I think it's better suited to screen type controller and I would love not having to hook up a phone every time.

[@caullla]

still can't wrap my head around, why it is impossible to change sharpness settings without RC, makes no sense

[@MikeLockheart]

I'm so happy this drone came out, as well as the mini 4k because they are both less than 400$ When I fell in love with flying drones, I got the mini 2 when i t was brand new,. cost me like 600 or 800 for the fly more combo I think. Flew it for like almost 2 years, then crashed after thousands of flights... couldn't afford another one. I cried for it's loss, and slowly just accepted that I would never be able to own another good dji drone. Now I can !!! because 200-400$ is within my reach, 600-800 or up is not.

[@HereticPhotography]

It's a pain in the ass switching from my air 3, to the neo. EVERY time it has to update firmware 🙄

[@Zandian]

Hope they means there’s hope for the Goggles Integra…

[@mssippijim]

Goggles 3 and motion 3 controller. Goggles 2 and Integra or motion 2 will not work.

[@FrancisDenney]

The 3n also works for anyone wondering

[@garyhgaryh]

I love DJI products. It's too bad there is legislation that is going to shut this company out of the US marketplace thanks for Skydio... Will never buy a skydio product.

[@SkyPixles]

WORST DRONE I HAVE EVER BOUGHT FROM DJI - Camera quality is Garbage! DONT BUY!

[@Dronevalley]

Thanks for the post but have to disagree. It's not Air 3 quality but has a large sensor and a decent imaging package. The shots I captured on vacation were pretty decent and you have to remember the drone is less than $200. If you're looking for professional quality, you'll have to step up to the Mini 4 Pro, but it's 5X the cost so the Neo is perfect for new fliers or a great vacation drone.

[@shadow6996]

I purchased the Litchi app so I could have follow me with my mini 2 but the Litchi app stinks cause it say's no gps and follow me just in not working. I have the DJI air 2 that has follow me but it's a bigger drone and I prefer something smaller so I bought the Neo and LOVE IT! Too bad my remotes both for the mini 2 and air 2 DON'T work with the Neo and I really Don't want to buy another remote for the Neo, I'll just play with my other drones like the original Mavic Pro that still Blows ALL my drones out of the water. Thanks for the "EXCELLENT" video...