1/72 Airfix Curtiss P-40 Warhawk Video Build

Here's a full video build of the excellent 1/72 Airfix P-40 Warkhawk. Built in the markings of the "Flying Tigers", I highlight some simple techniques to take the model to the next level.
#p-40model #p-40warkhawk #flyingtigers
Make sure to follow me online @
★www.flyingsmodels.com
★ / flyingsmodels
Thank you for your continued support to the channel and I hope that you are finding all the episodes informative and helpful.
Keep the comments and feedback coming as they help me adjust the content of the channel to better meet your needs as well as help to make me a better modeler!
If you are interested in seeing some of the building products used in this video or that are currently on my bench, you can check them out at the links below:
1/72 Airfix Curtiss Hawk kit: amzn.to/2IuvNtb
Dymo Tape: amzn.to/2Is1t28
Oil Paints: amzn.to/3gkn4pp
White Spirits: amzn.to/3456iHk
Brushes: amzn.to/3iGW4kz
Silhouette Cameo Portrait: amzn.to/3cwmaUO
Tamiya Cement: amzn.to/3ghZWbk
CA glue: amzn.to/2Mn67x1
Solder Wire: amzn.to/2AzclXM
Pewter foil: amzn.to/39XpxWg
Dental Resin Powder: amzn.to/2BSEz0o
Tamiya Fine Putty: amzn.to/36turX3
Tamiya Tape: amzn.to/2WZbxED
Solder Wire: amzn.to/2Yr5tEj
Airbrush: amzn.to/36tu5zH
Compressor: amzn.to/2A4vkt8
Tamiya Paints: amzn.to/2LTSmph
Tamiya Thinner: amzn.to/3cUxOZE
AK Gauzy: amzn.to/3dr4Lxf
AK Thinner: amzn.to/302UXFU
Mineral Spirits: amzn.to/2yu67bf
Tamiya Fine Putty: amzn.to/36turX3
Sanding Pads: amzn.to/3c5io3K
Copper Wire: amzn.to/3eGLPL2
Razor Blade: amzn.to/3d0OkqW
Olfa Circle Cutter: amzn.to/2Avly3V
Evergreen Styrene: amzn.to/2B4zJN2
Micro Drill: amzn.to/2Zw1Rmx
Straight Pins: amzn.to/3bVmlb7
The Camera I use to shoot the video: amzn.to/3bXlMxl

[@dexterscott7824]

I made many Airfix 1/72 kits when I was a kid, and it was “one coat of Humbrol enamel brushed on, done.” No weathering, panel lines, chipping. Not sure *anyone* did that in the 1970s - I never saw anything like it. What amazes me is that you can spray within the very small panels on a 1/72 aircraft. Takes really fine control with an airbrush to do that. I’m getting psyched up to give it a try myself. 😀

[@FlyingSModels]

I hear you. Modeling has come a long way since we were kids. I remember just rushing to get done so we could play armchair pilot. I hop you will try some of these techniques on your build and let me know what you think.

[@dexterscott7824]

@@FlyingSModels More questions - when you use the hole punch to create instruments for the instrument panel, where do you get the plastic sheet you are punching, and how thin is it? (Must be super-thin.) Doesn't seem like you would need a very big sheet to punch out a lot of very small 1/72 instruments. Are you trying to make a set of instruments that closely resembles the real ones, or just that "look artistic"?

[@FlyingSModels]

@@dexterscott7824 I think I have a link to some various sheet styrene in the video description but that may just be rod and other stock. You can get it online or at a hobby shop or Hobby Lobby. It's Evergreen plastic sheet and I used various thicknesses from 0.010" to 0.020" or so. And I don't try to make it exactly like the real one, just a little more dimensional than a 2D decal.

[@MrPDoff]

I cut my teeth on Airfix many moons ago when I started of building models some 40 yrs ago. Sadly Airfix got left behind. Until Now. I have to say I have built a few of they recent kits, and I for one am glad to say, that airfix are now back in the race. Welcome home Airfix.Keep em coming

[@FlyingSModels]

That is the truth. They are certainly back. Would love to see them change to a little different plastic but hey, for the price I'm paying for these kits, I can deal with the softer stuff.

[@MrPDoff]

@@FlyingSModels Yep. Yet it does take you back with many fun and innocent memories

[@dexterscott7824]

Last night I discovered how incredibly small a 1/72 instrument panel was, which I didn't appreciate until I tried to improve it using your methods. In the video it looks a lot bigger! =D

[@FlyingSModels]

Yes, a 1/72 instrument panel is quite small. The good thing is that it doesn't have to be perfect to give a good, representative look. They say the camera adds 10 pounds. Maybe it does the same thing to the instrument panel...making it look a lot bigger :)

[@horatiosplodge3370]

I've recently taken up modelling again. The last time I built something I was probably 10 years old and ended up with more camouflage and parts on myself than on the plane. I keep coming back to your videos again and again for hints and trips. I'm learning so much and I'm getting decent results. The models you make look awesome. Thank you so much. Looking forward to your next video 👍😊

[@FlyingSModels]

Thanks, Horatio. I appreciate the kind words and I am glad to hear that some of the videos are helpful. My experience as a kid was much the same as yours with not only paint, but also glue...haha. I'm glad to hear you are back into building and things are going well. I'm already working on the next video so be sure to stay tuned! Thank you again.

[@user-du6yr1qx5d]

Те модели что вы делали в детстве были более примитивные...сейчас качество и детализация шагнули далеко вперед...еще и 3D модели пошли...Успехов в ваших начинаниях!😊

[@septiccalling8341]

Thoroughly enjoyable little film with a beautiful end result. I could watch you work all day...........maybe I will! 🤔

[@FlyingSModels]

Hahaha...just don't get in trouble for not doing your work or chores but watch as much as you can or need 😄 Really appreciate the good feedback!

[@rothschildianum]

I totally agree with you, Airfix is very good for people to practice building plastic models. The price is very reasonable.

[@FlyingSModels]

For sure. Lots of value in these new releases. Thanks for the comments.

[@wkelly3053]

This is excellent, especially for a 1/72nd scale effort. When I first saw the photo, I thought it must have been 1/48th. Your build style is really interesting in many ways. When I first started watching your channel, I wasn't sure about some of the mild exaggeration of colors, etc., but I have come to really like the effects. I think when you are building a scale model it is often necessary to exaggerate some effects; otherwise the result is a bit too dull for something that is small. Also, the fact that you use so many varied finishing techniques has valuable instructional value because the viewer can pick and choose from those options. Finally, I think you are telling people that its okay to build what suits your eye rather than some people who tend to tell you it should be a certain way to be right. An artistic painter, after all, creates based on impressions. Otherwise we might as well just take photographs. Good work.

[@FlyingSModels]

I appreciate that very thoughtful and well communicated feedback. It seems as though you understand my approach and intentions far better than most. For nearly every modeler, building is a hobby, not a profession, so approaching it from a perspective of what works and looks best to the individual builder is what it's all about. Far too often, others in this hobby crush peoples spirits and artistic "flare" by trying to confine them to a particular approach to being "right". Art couldn't be farther away from that. Look at all the various styles that are out there. Is photographing a real subject art? Sure it is. But what about impressionistic painting? I say that's equally art. So I build the way I want and what looks good to me. As you say, if we build true to life, it often looks too plain or dull....at least to me. Thank you for sharing your thoughts. All the best - Chad

[@vaughanlockett658]

Picked up this kit from the local supermarket, love the paint job. I will be trying out some of your paint techniques. Great channel love the narration keep it simple easy to follow.

[@FlyingSModels]

Excellent. Glad you like the videos. It's a great little kit and I'm sure you'll do a much better job than me. Have fun with it!!

[@rogerdavis3454]

I'm amazed at your skill and patience. It's incredible that you can provide so much detail in such a small model.

[@FlyingSModels]

Thank you very much for that kind feedback. I hope that the video was helpful for you. Happy New Year!

[@danwilliams1686]

Excellent build. I've noticed in the cockpit when I used tamiya washes on flat paint and then wipe the surfaces before it can dry it leaves a nice kinda stained look. I've been building models for over 40 years and you are still teaching me new techniques. Thank you.

[@FlyingSModels]

Thank you, Dan. Glad that the videos are helpful and providing a few potential alternative approaches/methods for your modeling arsenal. Cheers!

[@steves1112000]

I love the 1/72 Airfix kits. They're my "zen builds"

[@FlyingSModels]

Agreed. Nice "go to" kits when you need a break from the more taxing projects!

[@therebeginner]

I am a beginner modeler and it's one of the models I plan to build (already purchased it). Thx a lot for your video, I find it very well done and very instructive. I learned a lot and will watch others of your vids ;)

[@FlyingSModels]

Thank you for the feedback. Good luck on your modeling journey and most of all, have fun. Hope the videos help make it even more fun for you. Let me know if you ever have any questions. Happy Modeling!

[@brianc1701]

Outstanding result, especially for 1/72. Excellent information on scratch building, construction, and paint modulation. Been modeling for 50+ years, and still learn quite a bit from skilled artists like you. Thanks!

[@FlyingSModels]

Thanks! These are nice kits and really allow modelers to achieve some good results. As long as we keep learning everyday, we are doing something right :)

[@MrMarcocamp]

This is a nice piece of cake. Enjoyable, instructive and simply one of the best samples of all the right techniques to help us growing

[@FlyingSModels]

Appreciate that. Glad that the videos are helpful.

[@2-Hands]

I am currently building that model myself and found when removing the Control Stick from the Spure tree can be a Pain, I found that using a small Razor Saw and cutting as close as you can to remove it. One thing to remember, when holding the Control Stick between your Fingers to either paint it or install it be CAREFUL, the Heat from your Finger will BREAK IT. I gone through 2 of these already and if you need to replace it, Airfix has one of the BEST "Customer Services" I ever used next to Revell of Germany.

[@FlyingSModels]

Great tips, thanks! I had the same problem with the pitot so I just made a new one. Good luck on your build!

[@2-Hands]

@@FlyingSModels By the way, do you know about a Polish company called "Master Models"??? They do Gun Barrels and Pitot Tubes in all 3 scales. I am using their set for my P-40 build in 1/72nd scale. If you want, I could send you a link to their site for you to take a look???

[@FlyingSModels]

MH53JTom thanks! I’ve used them in the past on some of my larger scale builds. Excellent products for sure! Thank you for the reminder.

[@2-Hands]

@@FlyingSModels NO Problem, GREAT build again! So, what do you have next for us???

[@FlyingSModels]

@@2-Hands I'm working a bunch of things. Still working the 1/32 Fairey Gannet and I've thrown in a 1/32 YA-7F conversion. Also working a 1/48 F6F Hellcat.

[@josecesar5952]

This is great work!

[@FlyingSModels]

Appreciate that. Great little kit!

[@PerisModels]

Always looking forward seeing your builds my friend 👏👏👏👏👏

[@FlyingSModels]

Thank you Peri. Glad I'm not building 6 of these at one time 😅 Looking forward to the next Tomcat episode on your end 👍

[@BennyCFD]

Great build.....A helpful hint take a long piece of narrow tape and tape under one wing and pull it taught over the top of the plane and under the opposite wing. It will pull the seams together and all you need is to cement. It works great. It's simple, and it saves a lot of time.............

[@FlyingSModels]

Thanks for that, Benny. I sometimes use that approach but in this case, it would have resulted in the wrong dihedral (by a lot). I checked that first and it was at the correct dihedral with that nasty gap. I should have just put the top wing parts on after installing the lower wing and fixing the alignment to the wing to wing joints if that existed. Appreciate the feedback!

[@acosacca1908]

Another Amazing video!!! Thanks for sharing!!!

[@FlyingSModels]

Thanks for watching!

[@b.vhidalgo4817]

Nice tips and beautiful model

[@FlyingSModels]

Thanks for the good words. Really appreciate the feedback!

[@petermathieson5692]

Brilliant bit of modelling. Very good video too: well shot and edited with excellent audio. The complete package. Thanks.

[@FlyingSModels]

Really appreciate the good words. I'm glad that the format works well for you.

[@ianhutchinson9330]

That's a lovely job! It's good to see someone such as yourself championing the smaller Airfix kits, as they are so often what gets new modellers into the hobby, especially young people (including me, many years ago!). Showing how they can turn out is an inspiration and an encouragement - well done, and congratulations on your excellent work!

[@FlyingSModels]

Thank you, Ian. I really appreciate the comments I hope that build video is indeed inspirational for some.

[@ChristianSchroter]

Hello mister fsm!outstanding work.thank you for sharing. with sticky greetings. Christian

[@FlyingSModels]

Thank you for the good feedback. Hope the video was enjoyable and helped a little.

[@Win1forQuinn]

Excellent build! You have a great way of explaining things as well. I'm a relatively new to scale modeling and learned quite a few tricks that I may try in my next build!

[@FlyingSModels]

Thank you! I'm glad that the videos are helping. I wish you all the best in your modeling and hope that the videos I continue to put up will continue to help and inspire. Cheers!

[@ColonelRebScaleModels]

Excellent work, it’s is a fantastic kit and an even better value.

[@FlyingSModels]

Appreciate that. I completely agree. I really great value in this kit!

[@mirrorblue100]

Terrific all the way around - thanks.

[@FlyingSModels]

Thanks! Appreciate the kind words.

[@laMoort]

it's a gem!

[@FlyingSModels]

Appreciate the feedback!

[@markharnitchek2009]

nice work ... my last P-40 was the old monogram kit from the 1960s ... surprisingly good for a 50+ year old kit.

[@FlyingSModels]

It is for sure. About how I feel about the old Monogram P-39. Thanks for taking the time to provide some good feedback! Cheers!

[@mathiastrum4582]

Finally i found all the techniques that i need in one video. My aircraft models have too look like yours. Thank you so much for sharing with us.

[@FlyingSModels]

Thank you, Mathias. I am glad that you found the channel and that the videos and techniques are helpful. Let me know if you have any questions down the road. Always happy to help. Happy Modeling!

[@mathiastrum4582]

@@FlyingSModels thank you so much. People like you brought me back in to this awesome hobby. Thank you so much. I started this hobby there was no internet and i give up because of unknowing how to do techniques. But now i make dioramas and nice models. Just because awesome people like you share your experiance with us. And i have a question, what can i use as an alternative to white spirit that not attack my base acrylic coat? That product that you use is at the moment not aviable in Germany. Greetings from here. 😊

[@bigcharliesmodelgarage296]

Looks great. Thanks for sharing.

[@FlyingSModels]

Thanks for watching!

[@TheModelorian]

Well done! I really like the effort you put into the cockpit. It looks so much better and realistic this way. Cheers!

[@FlyingSModels]

Thanks you for the kind words. I agree, a little extra effort in the pit makes all the difference.

[@joseluiscastanorestrepo]

Magnificent work. I just got that model

[@FlyingSModels]

Thank you, Jose! I hope you enjoy it as much as I did. Happy Modeling!

[@joseluiscastanorestrepo]

I will, thanks

[@epiceli04]

Great build! keep up the good work!

[@FlyingSModels]

Thanks, appreciate the feedback!

[@davidparker2259]

Awesome detailing job on such a small kit.

[@FlyingSModels]

Thanks, David. It's a small one but a really nice one!

[@Ralle1968]

Looks Great!👍👍👍

[@FlyingSModels]

Appreciate the good words!

[@muchasgracias6976]

Another fantastic build. I also enjoy your commentary and your voice reminds me somewhat of Peter Coyote.

[@FlyingSModels]

Appreciate the good feedback. I must admit that I didn't know who Peter Coyote was but when I listened to his voice, I think I remembered it from wildlife documentaries. Glad you like the commentary. Cheers!

[@johnnichols9056]

Such an improvement over the days of old! Great builds, ah the minor improvents make a much nicer build than OTB!

[@FlyingSModels]

Thanks, John. It's a great little kit and made just a bit better with a few mods.

[@elimarpiratelo1617]

As aways, amazing... congratulations

[@FlyingSModels]

Thank you! Appreciate the good words!!

[@oceanvibesphotography8395]

That a awesome looking p40 love watching these builds I would like to see a. Hawk hurricane build in the future 🍺

[@FlyingSModels]

Thank you. I’ll try to pick up that kit and get it in the cue. Cheers!

[@jeromechapelle530]

Very nice video, well produced with plenty of techniques. As often you made from this pretty simple Airfix kit a stunning piece.

[@FlyingSModels]

Really appreciate the feedback. Amazing what can be done to a $6.00 kit.

[@LondonEmergency999]

Great build, underrated channel!

[@FlyingSModels]

Thanks! I appreciate the kind words.

[@swing.wing_singh]

Fantastic work. Really love all that weathering and cockpit instrument panel scratch building. Quite an effort in 1/72

[@FlyingSModels]

Thanks! Was a fun little build.

[@swing.wing_singh]

@@FlyingSModels Would it be possible for you to show the tap and die set that you use for the IP detailing? I am planning to buy one but don't know if its the correct one or not.

[@FlyingSModels]

@@swing.wing_singh Hey Sherbir, Unfortunately, I don't think the one that I have is still available. But Micro Mark makes one that has the same sizes as the one I use. Here is a link to that one. www.micromark.com/Micro-Punch-Set?gclid=CjwKCAiAq8f-BRBtEiwAGr3DgZW0km-L1DwFVI2xl2jCcqmLWA2ZzEqcVHC93ZgpOri2RNPozMZvrxoCxy4QAvD_BwE Hope this helps! Let me know if you need anything else.

[@gsr4535]

Great job building! Nice video too, well done! 👍

[@FlyingSModels]

Appreciate the good feedback. Cheers!

[@williampike2228]

Very nice!

[@FlyingSModels]

Thanks! Neat little kit.

[@christiansifredi7476]

Nice scratchbuilt result on the instrument panel, and the weathering was great too ! A great build !

[@FlyingSModels]

Thank you, Christian. I appreciate the good feedback!

[@christiansifredi7476]

@@FlyingSModels you're welcome, as always :D

[@eddielane72]

What a way to start the day.. woke up to a KZbin notification.. the long awaited flying s models video had been posted. Watched it in bed and subsequently was late for work! Was worth it though as this build is tremendous. Your attention to detail and skill in executing your work is amazing. Once again thankyou for sharing your videos and talent with us.

[@FlyingSModels]

Thanks for the good words...just sorry that I made you late for work. Hope that didn't cause you too much trouble 😉 I appreciate your thoughtful comments and glad you liked the build/video. Cheers, Chad.

[@eddielane72]

@@FlyingSModels no need to apologise Chad it was worth it... who wants to work when there is one of your build videos to watch. Keep up the amazing work. Look forward to your next post. Kind regards. Eddie

[@FlyingSModels]

Thanks, Eddie. Really appreciate the continued support.

[@MVeminor7]

Not only your models but, your videos are very well made. Filming, lighting, editing and narration. Amazing!! The unseen build of the build. Thanks for being so diligent and sharing

[@FlyingSModels]

Thanks for that positive feedback, Michael. I really appreciate that as it does take some time to put each video together. Just wish I had more time to do even more.

[@MVeminor7]

@@FlyingSModels You're doing just fine. Thanks for the reply

[@josemanuellopezfuertes2775]

Great Work Sir... 👍

[@FlyingSModels]

Thank you. Really appreciate the kind words.

[@gavinbooth]

Art in 1/72 scale , thank you for posting sun an informative video . Regards Gav.

[@FlyingSModels]

Thank you, Gav. I'm glad that videos are informative for you.

[@cesara9480]

Great Channel !!! You make all things look easy!! Salutos from Brazil!!!

[@FlyingSModels]

Thank you, Cesar. Appreciate the feedback and the kind regards!

[@infernumdk]

So happy to watch your videos again Chad very nice build as usual 👍🇩🇰

[@FlyingSModels]

Thanks for that. Glad you continue to enjoy them.

[@scottlinder9882]

I always enjoy your videos and look forward to every one. There are so many weathering products out there that it is easy to spend a fortune on things that are not needed. I love that you are using just a few basic colors and materials and getting excellent results. I have been trying your weathering techniques and so far I have been well satisfied with the results. The best part is that it is so easy to fine tune and adjust to a particular taste. Now if you could just teach me the trick t spraying that came pattern without gettin overspray in the cockpit. 😀

[@FlyingSModels]

Thanks, Scott. I completely agree with regards to paints and other weathering products. I've tried all kinds but keep coming back to some of the basic ones. I'm glad you have tried some of the techniques and are satisfied with the results. Most of them are very adaptable to whatever your personal preferences are. Now on that airbrushing of the fuse near the cockpit, just neck down that spray pattern as tight as you can and hold your mouth right and you'll be all set :)

[@SchmidtJim]

Love your videos - the narration is calming and helpful - the craftsmanship is fantastic- I’ve seen other builds of p-40s where they insist the camo was “hard lines” but I liked your effect so much better - close with the airbrush but not masked - like the others have said - your notifications are always welcome - take care

[@FlyingSModels]

Thanks for the feedback, James. I'm glad you like the videos and the builds. Just trying to provide some help or inspiration with each of them. Cheers!

[@edstud1]

Great video, you do a great job, you have great skill!

[@FlyingSModels]

I appreciate the feedback. I hope that the videos are helpful to my fellow modelers and maybe inspiring to those that are thinking about getting into model building.

[@Ronno4691]

Superb. Thank you for taking the time, the trouble AND also for expending the no doubt considerable financial expenditure to film this in such clear detail! Your building and painting tips have given me some excellent pointers for future projects albeit sans airbrushing! Very much Liked and Subscribed!!

[@FlyingSModels]

Really appreciate the thoughtful feedback and the sub. Hope the videos continue to be helpful, when I can get back to the bench to make more. Cheers!

[@Ronno4691]

@@FlyingSModels If I hadn't known this a was an Airfix 1:72 scale, I would've believed it was a 1:24! You've definitely inspired me to try the heavy weathering and 'dirtying down' effect on my own efforts! Thanks again 👍

[@FlyingSModels]

@@Ronno4691 excellent. Glad the video was inspiring and I’m sure you’ll achieve even better results on your builds. Happy Modeling!

[@AirandGroundinScale]

I admire you how you took the challenge to detail-up a 1/72 aircraft!!! WOW!!! Very nice Video!!!

[@FlyingSModels]

Thank you for those good words. I like to use the 1/72 builds as a little break between the larger and more complex builds but just can't seem to just build straight out of the box ;) Cheers!

[@AirandGroundinScale]

@@FlyingSModels At least this build didn't seem like an in between build :) thanks for sharing!

[@FlyingSModels]

@@AirandGroundinScale Thanks! It was a fun little build.

[@mikes5637]

I don't think my 59-yr old eyes can handle that instrument panel method, but that was impressive.

[@FlyingSModels]

Well it does tax my old eyes too but that's where the mag glass comes in..haha. I appreciate the good words!

[@johnnichols9056]

I use a magnifying hood type afair that I got from my DR. dad back in the day. Great assistance even for details on the larger scales.

[@thebobloblawshow8832]

Great build and weathering. Beautiful outcome.,If I may make a suggestion. When I’m doing filling I like to put a piece of tape on each side of the line. I find it easier to get the putty into the gap and keep it from spreading over the whole surface. Not my idea but it’s worked really well for me. I’ve only used it on straight lines. I love the spruce idea you used on the wing to fuselage gaps. Thanks for the tips. 👍👍🇨🇦

[@FlyingSModels]

Thank you Bob. I appreciate the good words and the suggestion. I usually use the tape technique I'm trying to protect surrounding detail but it would have resulted in a little less filler in some spots on this build too. I should have used it here. Thanks for commenting and sharing. Cheers, Chad.

[@thebobloblawshow8832]

FlyingSModels : looking forward to more of your builds. I’ve got 20+ kits to build. Mostly Airfix. Love their 1/72 stuff. They don’t take up too much space.

[@FlyingSModels]

For sure. They are just the right size with plenty of detail for the scale!

[@hamishsheinkels1478]

Really good video mate

[@FlyingSModels]

Appreciate that. Was a really fun little build!

[@user-du6yr1qx5d]

Прекрасная модель.😊

[@FlyingSModels]

Thank your for the kind feedback.

[@gatblau1]

Wow you did a great job on this. I just started working on mine and I agree Airfix has been releasing some nice models. I paid $6 for mine using the Hobby Lobby 40% off coupon, amazing.

[@FlyingSModels]

Thanks! Hard to believe you can get these kits for 6 bucks! Amazing indeed!!

[@davepasopton8840]

Very Helpful thanks. I'm just starting with the North African Desert version (Tomahawk) & might attempt some of your embellishment mods to the cockpit.

[@FlyingSModels]

Great! Thanks for the feedback and good luck with your Tomahawk! Happy Modeling!

[@davepasopton8840]

@@FlyingSModels HI Happy New Year to you. I hope your keeping safe & healthy. I have now categorised your videos as MasterClass, because your explanations & techniques definitely rank as such compared to other contributors (with respect). My Desert P40 progress through the Festive season has been somewhat slow but I succeeded with your Canopy cut and wing root-fill methods. Thanks. I wondered if you have a production that shows your colouring, modulation & shading techniques for the exhaust pipes of these types of WW2 aircraft engine? The Airfix instructions on this kit only suggest a plain dark Greyish colour from the illustration on the box, but it is not specified. I realise they are rather small scale but for future builds at larger scales I would appreciate your take on them. Your latest Mustang post is brilliant.

[@mathiastrum4582]

Hi Chad. Today i tried your techniques on my 1/72 scale F4U-Corsair from Revell and i have to say, it works and looks so incredible awesome good that i can't belive it. The Cockpit looks so interesting now with the colour Variation. Now i have to wait until my Gauzy arrives than i can go to the next steps. Once again i have to thank you to share your experiance with us. 👍

[@FlyingSModels]

Really glad to hear that the techniques worked so well for you. They are easy to apply and I agree with you, provide some good results. Keep me posted on how things progress on your Corsair. Thanks for keeping me posted.

[@mathiastrum4582]

@@FlyingSModels Yeah i will tell you how is going on. I have floor pledge at home but you tell in a video that you had problems with that stuff, so i won't thy it. I wait till my Gauzy is there. 😂

[@mikeglenn1000]

Outstanding and incredible job, my friend!! I enjoy your videos...Mike G

[@FlyingSModels]

Thank you, Mike. Glad you liked this one. Was a very enjoyable little build. Cheers!

[@mikeglenn1000]

@@FlyingSModels I always do...chat soon

[@borgao]

Hi Chad..Another great build and beautiful result. Have to build one of those AVG P40's....i have the Trumpeter kit, but first will be the Argentine Corsair 😊😊😊. .decals already ordered ☺....cheers and keep safe.

[@FlyingSModels]

For sure. I look forward to hearing/seeing how your Argentinian Corsair turns out! Best of luck!

[@duncanling2127]

Wow very cool👍🏆

[@FlyingSModels]

Thank you!

[@duncanling2127]

Your very welcome I enjoy your builds I hope you and your family have a Merry Christmas and happy new year 🎄⛄️

[@FlyingSModels]

@@duncanling2127 Appreciate the holiday wishes and I hope the same for you and your family. Wishing you all the best - Chad!

[@duncanling2127]

FlyingSModels your very welcome

[@duncanling2127]

FlyingSModels thanks Chad my pleasure ⛄️🎄⛄️🎄🎄

[@christiankirkwood3402]

Just beautiful! You continue to leave some hefty ego's on this forum to shame with that free - form, individual and highly skilled, yet satisfyingly minimalist approach that is adding to an encyclopaedia of model - making fun and enjoyment that is easy to watch... my girls still giggle and go all "goo - gah" everytime they watch and listen to you... as always, kindest regards and Merry Christmas from my harem :)

[@FlyingSModels]

Appreciate that, Christian. Just trying to have a little fun building some plastic and sharing some of the methods along the way. Can't take this model stuff too seriously now, can we? I hope you and your girls have a very Merry Christmas and a safe and prosperous new year ahead. All the best to you and yours.

[@pa_alia]

Just a note for next time - you're not supposed to fill those 'gaps' on the wing root. If you check drawings you'll see the wings are bent upwards in a V shape; so if you're fitting the wings and pull them up there is no gap - it'll fit perfectly :)

[@FlyingSModels]

Thanks for the note. Seems like on my example that the dihedral would have been too great had I pulled the wings up but it could have just been a modeling error on my part. Glad yours fit perfectly. Thanks for sharing!!

[@fubarmodelyard1392]

👍

[@FlyingSModels]

Thanks!

[@natehancock7882]

Very excellent work, thank you for sharing your process. An obvious question I guess, but the white spirit applied directly over the Tamiya paint does not dissolve it?

[@FlyingSModels]

Thanks for the feedback. The white spirits doesn't harm the Tamiya acrylic paint.

[@grahamhunt1902]

I'm really enjoying your aircraft build videos and learning lots of new techniques, thanks. I recently completed a Hasegawa 1/48 P-40E and my research indicated that they had unpainted metal seats. I wonder if that also applied to the P-40B, maybe Airfix got the colour call out wrong. 🍻

[@FlyingSModels]

Probably so. I just went with the interior green for ease and likely because I was lazy...haha. I think you are correct, though. Glad that the vids are helpful. Happy Modeling!

[@alexmoor1166]

Great job. I watching again and again as a tutorial for advancing my techniques. I have some questions: 1. How long dry time for oil paint layers? As I know oil paints dry long enough. Maybe you have some tricks for decreasing that time? 2. Which colors you had used for exhaust pipe?

[@FlyingSModels]

Thanks, Alex. I appreciate the feedback and I'm glad that the videos are helpful. As far as your questions, I don't wait long at all for the oil paint layers to dry. I find that with the use of the white spirits, they are usually good to go in a couple of hours at max. Most of the time, if you don't overdue the application of the oil paints, they are dry within 15 mins or so. It's really more about using them, along with those white spirits, to blend into the flat base colors to change the tone. On the exhaust pipes, I usually start by painting black and then come back in and airbrush a mixture of black and red brown and then some grey. I build up layers to get various effects. Hope all this helps. Let me know if you have any additional questions. All the best!

[@thekinksfan5102]

Thank you for this detailed tutorial. I have built three of these, and on the next one I would like to position the canopy open. I have purchased an early p-40 resin seat (only seat belts, no harness) and a yahu instrument panel, so I would like them to be visible. How did you manage to attach the sliding part of the canopy, as it is really too small (or too thick)?

[@FlyingSModels]

You bet and I hope it helps. With regards to the canopy, mine fit just fine without any modifications or thinning. It is too thick but I didn't want to worry about replacing it with a vacuum formed one. Let me know if you need anything else.

[@shermiesdad]

Great video. Many thanks for this. One quick question though. I couldn't help but notice that other than the black pre-shading, you don't seem to have primed the model before painting. Do you have any trouble with paint adhesion? Thanks!

[@FlyingSModels]

Thanks, Tom. Appreciate the feedback. I don't always prime my models and don't typically have issues with paint adhesion. I do typically sand down the surface a little while I'm taking care of the seams just to help the paint stick better. I'll prime every now and again, especially for metal finish models or ones where I did a lot of modifications, filling, and sanding. But priming is always a safe bet, that's for sure.

[@highlanderknight1]

Very good indeed. A question though. Do you apply the white spirit for weathering directly on the Tamiya colours or you apply a layer of varnish first? Thank you

[@FlyingSModels]

Thank you. As far as your question, I just apply the white spirits directly to the Tamiya paint. No varnish down first. Happy Modeling!

[@kenkingsflyingmachines2382]

Thank you for posting this detailed guide. You have a very pleasant and concise delivery. I am returning to plastic models for about the dozenth time in the last 50 years, attempting once again to actually finish something that doesn't look like s%&@. Unfortunately, my most recent offering failed to meet that final goal. I just bought this kit along with an older boxing that depicts a plane on Oahu December 7, 1941. Historically interesting, but a boring paint scheme, so maybe some aftermarket decals that cost 4 times the kit price? IDK. I'll use your work as my guide, and I hope for the same spectacular result.....that 10 year-old in me always hopes. Wait...it's been longer than 50 years...God I'm old!

[@FlyingSModels]

I hear you, Ken. I ain't getting any younger either. I appreciate the feedback and hope the videos help. Don't be too hard on yourself and make sure that you judge based on the most important criteria which is did you have fun and was it relaxing. Everything we want and need in a hobby. Good luck on your P-40 and I'm sure your results will be great! Let me know if you need anything!

[@stephenbridges2791]

Very nice. Where did you get those punches? I need to get some of those.

[@FlyingSModels]

Thanks you! As far as those punches, Waldron went out of business but I believe these are the same sizes that I have: www.micromark.com/Micro-Punch-Set?gclid=Cj0KCQiA_qD_BRDiARIsANjZ2LCDuJ7CMt5IdzFBty16iRPGjK235DQkwKUrW1VWgE7rRJhOdHy-sGsaAmqiEALw_wcB

[@bubbapipe]

Like Christmas when I get a notification that you have posted a video. I give a thumbs up even before watching it because I know it will be a great and helpful video...also the end product is never disappointing. Any progress on the 1/32 ganet ? Hope the price is with in my range so I can purchase one.

[@FlyingSModels]

Thanks, Ed. Appreciate that. That makes me feel like Santa...haha. I continue to plug away on the master patterns for the Gannet. Been focusing on those wing folds. Progress is slow but steady.

[@bubbapipe]

@@FlyingSModels im sure with your attention to detail that Gannet once ready is going to be one hell of a kit...can't wait.

[@FlyingSModels]

@@bubbapipe I'm sure hoping so. Thanks for the encouragement!

[@jamesjack1384]

Hi, do you use a spray booth and respirator when airbrushing?

[@FlyingSModels]

Nope, I spray with Acrylics and there's not much in the way of fumes. Hopefully I'm staying safe enough...haha.

[@TheFatdog11]

Did you spray Matt coat after decals? Just wondering

[@FlyingSModels]

Yep, after all the decals were done I oversprayed everything with a flat coat.

[@philbivins7133]

Chad do you have a recommendation as to where I might find the Waldron Die set? If not will you make a back up suggestion? Thanks

[@FlyingSModels]

Hey Phil, hard to find the Waldron sets but this one has the same sizes: www.micromark.com/Micro-Punch-Set?gclid=Cj0KCQiAmL-ABhDFARIsAKywVadYL2EJOK2VX3hyNJ5ttInulNKYy1iqSarrJxH3X_p1BqyHz1Xk1I4aAjtJEALw_wcB Hope this helps. Let me know if you need anything else.

[@philbivins7133]

Thank you Sir appreciate the reply..

[@FlyingSModels]

@@philbivins7133 Anytime. Happy Modeling!

[@robertjensen1438]

Just a comment for the algorithm

[@FlyingSModels]

Keep 'em coming so we can test the effectiveness on the algorithm!

[@fulcrum_9162]

I have this kit i dont have hombrol paint can i use ordinary acrylic paint? And thanks for inspiration

[@FlyingSModels]

I've seen some guys using ordinary craft acrylic paints on models but I've never tried. What brand paint are you thinking of using? Are you brush painting or airbrushing?

[@fulcrum_9162]

@@FlyingSModels i dont use airbrush

[@FlyingSModels]

@@fulcrum_9162 Ok, so what brand of acrylic paint are you wanting to try? You will need to really wash the plastic to get the mold release off and then it might be a good idea to lightly sand the surfaces with a fine grit sandpaper to give the paint better "bite" to stick to the plastic.

[@unclejack123]

Museum quality work Sir ........... just sayin

[@FlyingSModels]

Really appreciate that! Thanks for taking the time to provide good feedback!

[@116thcavscout]

How long do you let your panel liner on?

[@FlyingSModels]

Just until it dries to a matte finish. Probably 15 mins or so.

[@davidcole333]

I'm building this kit for my first kit and I'm ready to add the gauzy. Does the gauzy need to be diluted or can it be sprayed as it is?

[@FlyingSModels]

Hey David, I don't thin it at all. Just apply straight from the bottle. It's self leveling so it works really great!

[@davidcole333]

@@FlyingSModels I finished applying the decals, finished weathering and then panel line wash. Then I added the AK ultra matte varnish. I am really happy with the results I got on this kit for a first effort. I learned a ton and I owe you a big thank you. I'm moving on to a 1/48 mustang next and hope to learn from my mistakes I made on this first kit and keep learning and getting better.

[@FlyingSModels]

@@davidcole333 I'm really glad that you got the results that you were happy with. I think you will enjoy the Mustang even more. Learning and getting better with every model is what it's all about. Would love to see the results if you want to share. Maybe I could even share them with the community here. If you want to send some pics, you can post over at: facebook/flyingSmodels or reach out to me through the contact section on my website: flyingSmodels.square.site Congrats!!

[@cronkygames2896]

How did u not get any overspray into the canopy?

[@FlyingSModels]

If you are talking about overspray into the cockpit, I just use my airbrush to spray fine patterns close to the cockpit. If I worry about overspray, I just slip a piece of paper or tape temporarily inside the cockpit as I spray. For the canopy, I mask off the inside so I don't get overspray on it. Hope this helps. If you are asking about the canopy, you can see more here: kzbin.info/www/bejne/pXjVmoRqqraKf6s

[@cronkygames2896]

@@FlyingSModels thanks mate, I was talking about the cockpit lol, I was watching at about 2am.

[@FlyingSModels]

@@cronkygames2896 Just wanted to cover all the bases. I completely understand that 2am watching, things start to get blurry :)

[@matzelampe7898]

Nice work, the Model looks great, although i find the panellines on Airfixes Models a bit to prominent.

[@FlyingSModels]

Thanks. They are a little deep but in the end, I think they look ok.

[@davidcole333]

I'm trying to do this build for my first kit. I am having trouble removing some of the really small pieces from the sprues like the control column and the pitot tube. I broke the control column and will have to get one from another kit or scratch build one. Do you have any suggestions for ways to remove the tiny bits from the sprues without breaking them?

[@FlyingSModels]

I'm sorry to hear about that trouble but don't feel alone. I too had trouble with the control stick on the kit and it broke in half. I just glued it back together. I tried to snip the sprue attach point off all at once and may have been better served to cut it a little at a time with several "snips". I guess you could try to lay the sprue on the bench and cut it clean with a new blade but that may put too much flex in the control column too (if you can't get the sprue and part to sit flush with the build surface). You have identified a weakness in the kit itself in that the parts are too small for the attach gates. I didn't try this (and it may not work) but you might try to put some tape on the small part before snipping the attach point. This might prevent some flex. You could remove it after the first "snip" and then clip the other end. Just a thought. Hope this helps.

[@davidcole333]

@@FlyingSModels thanks for the tips, I'll try them and see if they work for me.

[@FlyingSModels]

@@davidcole333 Let me know how they work. I may try it a little on a 1/72 Airix Defiant that I need to start on in the near future.

[@bernardberben4852]

Its a shame zinc chromate is so rare to find in stock its like mining for gold lol

[@FlyingSModels]

Indeed. I'm always having to mixing mine up myself. But it does allow me to create different tones/shades, I guess.

[@alexandruionut415]

I need this sticker, somebody can tell me where can i find ?

[@FlyingSModels]

You talking about the markings for the kit?

[@alexandruionut415]

@@FlyingSModels yes

[@kilowhiskeyalpha6078]

How about some cannon damage, this underpowered plane was a coffin for many allied pilots.

[@FlyingSModels]

No cannon damage just yet. Maybe right before I get rid of it...haha.

[@marianholly863]

Another horribly over weather toy-like kit. What are you "teaching"?

[@FlyingSModels]

Obviously teaching rubbish to all those who will listen (and watch). Appreciate you taking the time to provide some feedback, regardless of the flavor.

[@peterdiepenthal4090]

Ten dollars hrs l remember when l was a kid 75 cents bid difference ha

[@FlyingSModels]

Hahaha....we are getting old. Either that or inflation :)

[@fubarmodelyard1392]

👍

[@FlyingSModels]

Thanks!