FlySky NOBLE NB4 Pt 2 - FGr4s Receiver Updating, Binding & Calibrating

[@DESOUSAB]

You are the man. Saved me from chucking this thing in the trash. Thank you, kindly!!

[@JohnStAmand-pf3xc]

Thank you brother.... Just sold me on the radio! 👍👊

[@wft5769]

Best update vid out there, Nice work. I use this vid every time I need to update.

[@tunesandatalk151]

Nuff respect WFT. Appreciate the comment and glad my instructions were clear to assist. Irie.

[@dynasty4851]

Subscribing just cause you showed a detailed review!

[@tunesandatalk151]

Thanks dynasty4851, much respect

[@emmasaville2858]

What a great video - loved the tips

[@tunesandatalk151]

Greetings Saxmanivan and to help you with your question, what firmware did your radio arrive with? The Mini Z Evo mode was added to firmware 1.0.41 and releases after so check if your firmware is of an earlier version despite you just received your transmitter. I don’t own a Mini Z but I understand how to get it binded to the NB4 Noble. Make sure you have the relevant chip for Mini Z and latest firmware. To check if your transmitter has the Evo mode: 1. Go into System. 2. Go to Radio Frequency Setup. 3. Choose AFHDS3 2 way and now you should see the Mini Evo frequency. If you don’t, that means you have a version that doesn’t have the Evo mode. If you have, then the binding process is straightforward: 1. Select the Evo mode first. 2. Go to RX setup. 3. Select bind RX 4. Press bind button on Mini Z. Now you should be good to go and keep in mind, all firmware update will request you do a rebind of all receivers as it erases all settings. Let me know how you get on and hope this helps

[@FS_Performance]

When I try to calibrate it it tells me that the calibration faild. Do you have an Idea?

[@Ghost-un4fu]

Have a question how can you update your firmware if you don’t have a pc😊

[@choke666]

BIG THANKYOU BROTHER!!!

[@Blimpus]

Hello my friend, I just found you doing some research on this radio, Would you still recommend this radio, I sure like it!

[@jungacat8]

Hey whats the name and artist of that song playing in the background?

[@4sondaprice]

Thanks for the video it helped me out and got me up running!!!!

[@tunesandatalk151]

Much appreciated 4sondaprice and happy that the video helped in some way and you can in turn share the knowledge should others need the help. Blessings.

[@filmdiesel3568]

Mine doesn’t show the new receiver, just the mini-z??

[@mikeruizesparza1514]

Great video! Thks for the job

[@Ghost-un4fu]

How do you know when to update the firmware

[@oddballmedia]

Great video, thanx 👍🥇

[@bansheebandithot350]

Yep that was very informative thanks dude 😎👍🏻🤙🇬🇧

[@JeepsCafe]

Why do I want to smoke weed when watching your videos? Lol 🤣🤣🤣🤙🤙🤙

[@tunesandatalk151]

Haha, hilarious SunSeaSurf. I guess it's just the cool Jamaican vibes flowing through. Blessings.

[@JeepsCafe]

@@tunesandatalk151 Blessings to you too brah, from the heart!

[@rcracecontrol]

WHEN I HIT UPDATE RECEIVER IT SAYS PLEASE CONNECT TO RECEIVER FIRST BUT IT IS ALLREADY CONNECTED WITH THE 3 FLASH'S I WILL NOT JUST BRING UP THE RECIEVER NUMBERS SO I CAN SELECT 1

[@tunesandatalk151]

Greetings Darren, only just getting a chance to respond now. I take it you have the matching receiver FGR4S or FGR4. If you have problems in updating, check within the software first what version you have, if you have just bought a new one, you may have an 8 channel one if so I think there are still bugs with the 8 channel. If the version you have is a 4 channel, then just follow the exact steps as I described in the video with the updating, then the binding, then the calibrating, it should work. So first get into the software and see what version you have and start from there. Just to say, too, if you have an 8 channel version, I'd suggest going back to the FlySky website, download the 4 channel and update the transmitter to that firmware. Then redo the procedure. I will soon do a video on updating the transmitter software. Let me know how you get on.

[@stephenmanley4097]

Does GT5 transmitter work with the FGr4s receiver.

[@andreataras89]

No, they work on different protocols (AFHDS 2A for the GT5 and AFHDS 3 for the Noble and the FGr4s receivers)

[@stephenmanley4097]

@@andreataras89 ok thank you for your help 👍

[@tunesandatalk151]

No Stephen. The FGR4S only works with the Noble transmitter.

[@danielkelly3337]

How did you change the steering wheel?

[@tunesandatalk151]

Greetings Daniel, thanks for the question. Due to your question, I decided to make a video to explain how to change the wheel. The link to the video is: kzbin.info/www/bejne/eKSTYZ2Gfbh9lbs on my channel. I hope this answers your questions in full. Feel free to share the knowledge. Bless up

[@stephenmanley4097]

Will that receiver work with a flysky i6x transmitter

[@tunesandatalk151]

Greetings Stephen, no it won't work as it's a different frequency protocol.

[@stephenmanley4097]

@@tunesandatalk151 ok thanks I'll probably stick with plan A then & get a Spektrum dx6e

[@rcplaytime]

great video, informative 👌subscribed 👍 👍

[@nikolajc7617]

What is it updating in the receiver???

[@tunesandatalk151]

Thanks for your comment Nikolaj, the reason for updating the receiver is that the receiver itself might have a different firmware than the transmitter. So you might try to bind them and it may not work and this might lead you to thinking the receiver and transmitter have a problem, which they don't. So it's always best to update the receiver as shown in the video clip. Feel free to ask any more questions if you need to.

[@nikolajc7617]

@@tunesandatalk151 Hi thanks for your reply, i have a flysky FS-IT4s and that also have receiver update fuction, i just didnt know what it was updating in the receiver, you got a new subscriber, and lets hear some Bob Marley.

[@xboxice2005]

Yow me link 😎👊