Flysky Noble Pro Drag Rc set up, adjustable take off %, 3 auto shift positions and trans lock.

Welcome back to Wtf Rc Cars,
Flysky Noble Pro Drag Rc set up, adjustable take off %, 3 auto shift positions and line lock.
USA version Flysky Noble Pro 2.4G 18CH Transmitter Remote Controller US Version w/ Metal Bracket Handle 3.5 Inch Color Screen FGr4B FGr8B Two Receivers US $399.99 £315.78
www.banggood.c...
UK/EU version Flysky NOBLE NB4 Pro 2.4ghz 18CH Transmitter & Receivers £399.99
www.rcmodelz.c...
For RCModelz link use discount code rcmz for 5% off most of the link prices.
Servos
THETA RAZOR T1 NFC £105.63
www.banggood.c...
Racestar BL7146HV 180° 46KG Brushless Metal Gear Digital Servo £50.15
www.banggood.c...
Ludicrous L8849 brushless servo £85
www.passionrc....
Power HD TR-4 Mini 7.4V 2.6KG Waterproof Metal Gear Servo for TRX4 £18.19
www.banggood.c...
AGF A80BHMW 40KG Waterproof Metal Gear Brushless Digital Servo £69.77
www.banggood.c...
Flysky Radios and receivers
FlySky FS-FRA01 2.4GHz Fishbone Antenna 8dBi £20.83
www.banggood.c...
UK FlySky FRA01 Fishbone Antenna 2.4g 8dbi Directional Antenna £19.99
www.rcmodelz.c...
Flysky NB4 2.4G 4CH Noble Radio Transmitter w/ HVGA 3.5" TFT Color Screen £146.77
www.banggood.c...
UK Flysky NOBLE NB4 2.4ghz Transmitter & Receivers £179.99
www.rcmodelz.c...
USA version Flysky Noble Pro 2.4G 18CH Transmitter Remote Controller US Version w/ Metal Bracket Handle 3.5 Inch Color Screen FGr4B FGr8B Two Receivers US $399.99 £315.78
www.banggood.c...
UK/EU version Flysky NOBLE NB4 Pro 2.4ghz 18CH Transmitter & Receivers £399.99
www.rcmodelz.c...
FRM302 range extender £81.80
www.banggood.c...
Flysky FGR4 receiver £29.09
www.banggood.c...
Flysky GMR micro receiver £27.93
www.banggood.c...
Flysky FGR4P £29.26
www.amazon.co....
Flysky FGR4B receiver £26.54
www.banggood.c...
UK FlySky FGr4B 2.4GHz 4CH AFHDS 3 Micro Mini RC Receiver £32.49
www.rcmodelz.c...
FlySky FGr8B £38.04
www.banggood.c...
UK FlySky FGr8B £34.49
www.rcmodelz.c...
FlySky FGr12B £40.33
www.banggood.c...
UK FlySky FGr12B £38.99
www.rcmodelz.c...
Flysky FS-RM005 NB4/Noble Pro FHSS 2.4G Module Compatible Kyosho MINI-Z £38.45
www.banggood.c...
UK Kyosho/FlySky NB4 FS-RM005 Module £36.99
www.rcmodelz.c...
ESC and Motors,
Hobbywing EzRun MAX10-SCT 120A Waterproof Brushless ESC +3660 SL G2 Motor for 1/10 Rc Car Truck - 4000KV £135.47
www.banggood.c...
TT2302 - Tekin Racing RX8 Gen3 - sensored or sensorless 1/8th or SC ESC - No limit £190.00
www.rccarshop....
TT1452 - Tekin Racing Hotwire 3.0 - Bluetooth ESC programmer £49.99
www.rccarshop....
RC cars
Wltoys 144001 1/14 2.4G 4WD High Speed Racing RC Car Vehicle + 3 batteries £84.64
www.banggood.c...
Gyros
AGFRC GY01 Aluminium Case High Stability Drift Tuned Gyro £31.05
www.banggood.c...

[@maikolrodriquez]

Good news, this works as expected now without the need of the exp d/r workaround as 2nd function. Just got my pro and began setting it up. Can't wait to use it. Thank you for your awesome content regarding this radio!

[@kennyjones2206]

Is the automatic shift points only on the nb4 pro? Is the software for shit points the same on the nb4 vs the nb4 pro?

[@WTFRCCars]

The pro has 3 shift points the nb4 only has 1 but I have done vids on both for drag setups :)

[@billrockhold7692]

Has anyone had an issue with multistage the ramp time? If I have the radio running one stage for 1.75 seconds, when I hit the throttle, the ramp runs for 1.75 seconds. But if I have multiple stages like L:1.0sec M:0.5sec and H:0.25 sec and I hit the throttle, the ramp runs for something like 0.95 seconds. I've experimented with a number of time settings but I haven't found a consistent pattern.

[@WTFRCCars]

I don't think most people have any of the stages set higher than 0.2 of a second as most drag runs are over in less than 2 seconds but I haven't had anyone mention anything so far about it.

[@Gurdian55678]

I’m confused do you have to use the throttle dr and idle up I thought the pro was like “low 45, mid 75, high, 100 and it would auto ramp like that do you have to use the line lock? Or will it just ramp itself to low mid then high? And that’s why you use line lock so you can start at low ? Idk if I explained that right

[@WTFRCCars]

I just added the lock as ppl where asking if you could hold the throttle on 100% then just hit a button and it goes through the range you have set that all,

[@leovandijk8852]

Hoping you can help.. I got my nb4 set up on my 2-speed crawler. I got the shift setup on a switch on the nb4, but i want it to only shift when its on some throttle, so the cogs engage smoothly. So no shifting when there is no trottle, as the cogs can be alligned badly. Do you know if this is possible on the nb4? If it is, it would probably make for a interesting video for crawler users too.

[@WTFRCCars]

Not sure but I'll definitely look to see if I can do it :)

[@leovandijk8852]

@@WTFRCCars thanks, thats awesome..! Your knowledge of the nb4 far exceeds mine at this point

[@MarcusHicksK.O.C]

how do i set the noble pro to launch at 15/20% & then run out my 8 second delay without having to push any buttons? this is for speed runs ~ once the car is lined up & at a dead stop ~ all i want to do is pull full trigger & get a instant 15/20% & then my set delay follows...i hope this makes since & you understand what im asking

[@WTFRCCars]

The delay would be set same as the delay for a drag RC but I don't think there is a way to just have the throttle start at 20% without pressing any other button? Maybe the dead zone on the throttle but not sure how for you can increase that

[@MarcusHicksK.O.C]

@@WTFRCCars ok what if i set only 2 stages & have my first stage with no delay for the first 20% & the second stage with a 8 second delay ~ do you think that will work? I will not have the transmitter til this Friday so i cant test it out til then.

[@WTFRCCars]

Yeh think that would work just not sure I got what you where after in the 1st question but definitely worth a try :)

[@ConditionZero76]

why would you launch at 40 % that's gonna have you spinning all over the place & running off the course?

[@WTFRCCars]

I wouldn't?

[@Ghost-un4fu]

Nice video but can do a video showing the steps you just did

[@WTFRCCars]

Not sure what you mean all the steps are in this video?

[@Ghost-un4fu]

@@WTFRCCars the set up’s you did in the transmitter I want to see how your rc car works with the set up’s

[@WTFRCCars]

Right got ya 👍 yeh will be doing some running vids when I get chance just needed the weather to dry up and somewhere to run it, I got a lot to do with that drag RC ;)

[@ConditionZero76]

will this only work on the Pro version?

[@WTFRCCars]

Set up this way yes but I have a vid showing how to set up the nb4 too