Flysky ST8 upgraded version throttle auto centre conversion guide.

[@filipejosegodinhoantonio2455]

Nice video👍Thank you🏎🇬🇧😎

[@WTFRCCars]

Thanks

[@Huntbk5]

This transmitter is good for ppl like which is not sure about hobby . Warbirds or edf .perfect easy to use cheap receivers . 😅

[@WTFRCCars]

Yeh nice cheap way to get into the hobby

[@pedrolahoz]

Did this conversion on my fs-i6x, but I placed the spring at the end, and it was a nightmare. Luckily did not loose the spring after it catapulted a couple of times.

[@WTFRCCars]

Yeh ya have to watch the springs :)

[@filipejosegodinhoantonio2455]

Possibly if you interrupt the wires that eliminate the top part and connect (solder) some LEDs to put on the joysticks, it should work.🤔 try to make a video about this modification🙂👌🇬🇧🏎

[@WTFRCCars]

Not sure what you mean ?

[@filipejosegodinhoantonio2455]

​@@WTFRCCarsHi, I'm referring to the transmitter's lighting LEDs. cutting the wires inside and soldering some additions with 2 LEDs to put light on the joysticks

[@WTFRCCars]

@filipejosegodinhoantonio2455 I'm sure there are pins for the LEDs I think flysky do a kit for it

[@filipejosegodinhoantonio2455]

@@WTFRCCars I don't know, I already searched and couldn't find it 🤔

[@WTFRCCars]

@filipejosegodinhoantonio2455 it was something I was chatting with them about some time back

[@kingsleychen8129]

Hi. I am interested after watching your video. Was wondering if you could lock the direction of the sticks. Example only up and down on the left stick and only left and right on the right stick.

[@WTFRCCars]

It's not officially a feature but you can open the transmitter and drill a small hole in the movement and fit a small screw or nut and bolt and fix any of the directions

[@laurentpaget254]

Is the kit the same for the st8 and the i6x?

[@WTFRCCars]

Sorry don't have an i6x so don't know

[@CarlosGutierrez-ou2bb]

Hi. Just a quick question. Once you have the auto center installed can you run two motors, say one on channel 3 and another on channel 1 and have forward and reverse on each channel? Trying to run a boat with two motors and need separate control for each motor, plus forward and reverse. Thanks.

[@WTFRCCars]

Yeh you can run 2 esc from different channels just remembered to remove one of the ESC power feeds or they may not calibrate I've seen that a few times

[@CarlosGutierrez-ou2bb]

@@WTFRCCars Thanks for the information WTF. As you run two ESCs will they be able to run in forward and reverse? I have the flysky fsi6 and that tx wont let me center the channel 3 stick. Always says turn throttle off when it is the center.

[@WTFRCCars]

It should work fine haven't seen any behaviour like that yet with it

[@pedrolahoz]

Yessss you can. You can also make switchable mixes to control both motors at the same time!

[@pedrolahoz]

@@CarlosGutierrez-ou2bb keep playing with it, you should be able to do it

[@simonscott6901]

Do they sell a kit for the self centering stick?

[@WTFRCCars]

Yes you can get the kit if you only have the standard not the enhanced one :)

[@simonscott6901]

@@WTFRCCars Thanks buddy

[@foxhoundra6444]

@@WTFRCCars just got mine from bang good but it's been opened because they installed a battery in it. I wonder if they lost my kit :(

[@WTFRCCars]

It's only the enhanced version that has the self center kit with it the normal version doesn't have it

[@foxhoundra6444]

@@WTFRCCars how do I know if it's enhanced?