✅ Flywoo F722 V2 Pro Review: Essential Technical Insights & 10V BEC Set UP

[@squaddingquads]

Please do let me know if you've found this helpful and if you'd like to se more in the future.

[@Nas-td7vm]

I've been looking for a review of this fc for a while. I found it very helpful. If you don't mind sharing how you managed to get that footage at the end of the video with the camera stabilized while you were doing those rolls?

[@squaddingquads]

@@Nas-td7vm thank you, if you look at the thumbnail you can see ovr mounted a caddx peanut on the rear of the quad it came from that:)

[@Nas-td7vm]

@@squaddingquads what kind of gimbal do you have that allows for the image to stay upright even when inverted?

[@squaddingquads]

@@Nas-td7vm none, it's an editing technique

[@GR33ZY.A1]

I use mine with the rubber gummies and works just fine 👍🏼

[@squaddingquads]

Odd, I need to re visit this I think

[@visioneerone]

I was using the Mamba F722 over the Speedybee stacks for my LR builds *specifically* because of the controllable BEC on the VTX power rail. (DGAF about the bluetooth feature, have never used it.) This stack looks to have the Mamba functionality for Speedybee (F7) money. Hell yea.

[@squaddingquads]

She's a good one no question

[@BMFPV]

Great review! I'm a lazy builder so the idea of everything on plugs sounds awesome! And VTX on a switch is genius! 👍

[@squaddingquads]

Yeah it's fantastic mate and I did use one to test and works like a charm, easy for switching built too. Yeah it's amazing, it was just a shame literally no one knew how to do it lol. Hopefully I'll get a bit of traffic too.

[@BMFPV]

@@squaddingquads It's a new product and they tend to rush them out so I imagine they'll get it all sorted before long, that's where reviewers like you help out 👍

[@squaddingquads]

@@BMFPV hopefully I can be of help 💪

[@bryanbailey9208]

thanks for this info regarding 10 v bec,, most helpfull

[@squaddingquads]

It's my pleasure. I've emailed flywoo to ask them to update the website. Thanks for the support

[@emanuelgarcia6827]

Which UART do I use when connecting DJI O3 ? I have the mini version am unable to get the DJI controller working on BF. The manual I got was not helpful 😔

[@squaddingquads]

Easiest way us to use to included plug in cables and the dedicated port.

[@royaltyapparelco]

Great product 🔥💯💥

[@squaddingquads]

💪

[@YosepAliSaputra]

i want to build my first fpv by myself, after watch your video i think i can't build and i didn't have experience how to build & how to setup from the scratch.. i just enjoy to fly, just fly not an freestyle flying..😅

[@squaddingquads]

If you think it's too much, then there are some VERY good bind and fly FPV Drones to take the stresses out of having to build. But if you do give it a try, then I'm happy to try and offer help and support

[@YosepAliSaputra]

@@squaddingquads i'm already have 7" drone, built by my friend.. i want to learn to built and can do some freestyle flight.. but i think it's difficult and i must learn how i choose parts for building and learn how to setting.. i think someday i'll try to built it.. i hope i can try..🤙🏽😁 but for now, i'm very happy flying to the top of the mountains bro 😅🤙🏽🤙🏽

[@squaddingquads]

@@YosepAliSaputra I'm always here to help buddy, stay safe 💪🔥

[@elarkangelmiguel]

Hi, in the web site is de manual f722 pro. I have one of these and found the manual at the first time. I used the shock-absorbing ball and don`t have vibrations on this stack or another one when use these. thanks for ther review.

[@squaddingquads]

Glad your working well buddy

[@Taylors_Fan718]

I will buy this soon

[@squaddingquads]

I highly recommend

[@Taylors_Fan718]

@@squaddingquads Thank you

[@mindrev]

Could you please elaborate more about the rubber grommets of the esc or you have a video about it?

[@squaddingquads]

I'll make a specific video but long story short, don't use gummies on your esc, just the FC

[@mindrev]

@@squaddingquads Thanks for your answer. I 'll wait for the video.

[@himanshubajaj3501]

where do i connect my analog vtx please help, My VTX is iFlight BLITZ Force 5.8GHz 600mW , is the soldring same as digital VTX?

[@squaddingquads]

@@himanshubajaj3501 i can't share screenshots here sadly but in the manual scroll down to analogue vtx and it gives you the pin out there.

[@harinderjudge96]

Do you have a link to the esc spacers that we should be using instead of the gummy’s it comes with?

[@squaddingquads]

Apologies they are included in the box, but the gummies are pre installed instead, I assume for shipping

[@OnlyDronesFPV]

Great honest review is this a new product or slightly older?

[@squaddingquads]

It came out about 4 weeks ago, unfortunately I was included in the pre release reviews, but I've put out information on setup here that no one else who's reviewed it had touched upon. I'd highly recommend this, but Flywoo do need to tighten up a little on support.we can all improve together 💪👆👆

[@BeautyBeastRC]

The no manual really triggered me lol.

[@squaddingquads]

Glad it wasn't just me lol, hope this video helped 💪

[@FATSNAIL-FPV]

great vid, but your voice seems kinda drowned out by the music and at the same time the base in your tone is droning a lot trough. tried to listen trough speakers, but it sound like the neighbours are watching TV very loud lol.

[@squaddingquads]

Sorry, this should be fixed for future reviews

[@FATSNAIL-FPV]

@@squaddingquads no worries, just a heads-up. Cheers!

[@squaddingquads]

@@FATSNAIL-FPV appreciate it buddy thanks

[@stevehaynes2857]

Hi, I have the Goku F722 mini v2 stack. I am installing the Walksnail Avatar HD V2 system. I have soldered the leads from the Walksnail VTX to the F722 using + - tx rx. I am not getting 10v power and am soldered to the 10 tab. My Betaflight does not have a mode called VTX Powered, just VTX Pit Mode and VTX Disable. I do have User 1 mode and have bound a switch to it. From here I am lost. I cannot fathom how to activate user 1 and PINIO is like a foreign language to me. If anyone can please assist me, I would be eternally grateful.

[@squaddingquads]

If your 100%your wiring is right, set it to user 1 and activate it, wait 10 seconds :)

[@stevehaynes2857]

@@squaddingquads thank you for the quick reply - much appreciated. I have no idea how to activate user 1. Sorry, this is my first build and I am an old, grey-haired noob as well.

[@squaddingquads]

@@stevehaynes2857 set it up, like you'd set up an arm switch in betaflight

[@stevehaynes2857]

Thank so much for your help and patience. I didn’t have the fc connected to the esc 🫣. I have now connected them and is is giving 10v and will switch on and off. Thank you, you have a new subscriber!