FM3 "Live Gold" TonePack Tutorial #2 -- Copying Amp&Cab Blocks from One Presets Scene to Another

[@daviguitar2000]

Austin , We are very grateful for your work!!!

[@al23x56]

Hi, any/what adjustments you'd recommend to the presets when using with studio monitors? As if I understand correctly - these were dialed in for live use? Also, are you planning to release "Naked amps" for FM3? Or maybe a somewhat reduced version of Naked Amps for FM3 (due to FM3 lack of dual amp feature).

[@austinbuddy13]

Hi Al23x - you probably will have to cut some low end (under 100 to 150Hz) on your DAW's channel strip if you are using LiveGold presets for recording/mixing -- they are dialed in to have some low end/bass content you can and want hear on stage, but would not use in a recording. The 1400+ Naked Amps requires two amps and two cabs in a single preset -- so it cannot be done on an FM3 which only allows for one amp and one cab, 1400+ Naked Amps only works on the FM9 and III. Hope that helps! - AB

[@al23x56]

@@austinbuddy13 thanks. If I'm dialing out low end within the actual preset - would you recommend doing that in the Cab block of the preset (Low slope dB setting)? Or is it better to add a filter block to deal with unnecessary low end? Thanks again .p.s. Going through the "Live Gold" presets atm - they are incredible!

[@austinbuddy13]

@@al23x56 I would use the Cab Block Lo Cut first if it’s just a single preset/scene thing. For your whole system across all presets, the Global Out PEQ is the way to go. Enjoy!

[@istari_fps1]

Loving the live gold Pack! How would I go about adding an additional amp and cab to the existing preset chain? Ala i want euro modern on amp 1 and cab 1, and euro vintage on amp 2 and cab 2? Keep up the awesome work!!!!!!

[@austinbuddy13]

Josh - you can't on a FM3. It only allows one amp block and one cab block (CPU limits it). You can on an FM9 or Axe=Fx III. If you do have the FM( or III, then go to latest Fractal Factory Bank 3 and at the end of the bank is "AustinBuddy's XTCs" preset and that has exactly what you are looking for - Vintage for scenes 1-4, Modern for Scenes 5-8. Enjoy!

[@wesleysnow3467]

Nice work. When I boost my leads I use a different channel in the output block with that channel louder in output block 1, but not louder in output block 2 because it goes to my in ear monitors and I don't want that louder and blasting my ears. Thanks for the video.