FMS MASHIGAN - Full Teardown (You will want to watch this)

  Рет қаралды 9,546

DixielandR/C

DixielandR/C

Күн бұрын

Пікірлер: 40
@broderp
@broderp 14 күн бұрын
Would have been nice to show how those parts were removed and reinstalled, as well as what type of grease. (You gave a brand, not the type). Thank you.
@BrandViolation
@BrandViolation Жыл бұрын
Thank you for this. I got their Fj40 and it’s bone dry. None of the “influencer” reviewers don’t talk about this sort of stuff, especially for this model. Much appreciated.
@teemuhall
@teemuhall 2 жыл бұрын
For a crawler with all a full interior, lights and a hard body with removable top for $329 , I will grease my own axles. The big companies could take note.
@DixielandRC
@DixielandRC 2 жыл бұрын
I agree. But i did this for the ones that just think its there. And its always good to check all of your rtr’s anyway.
@teemuhall
@teemuhall 2 жыл бұрын
@@DixielandRC absolutely I get it
@Rajasekhar-ink
@Rajasekhar-ink Жыл бұрын
How well will this compete against trx4/axial scx 10?
@ryand4786
@ryand4786 Жыл бұрын
Agree 💯, they can also take note of the carry case FMS provides with their rigs , haven’t seen anyone else do that .
@dhcho4473
@dhcho4473 2 жыл бұрын
Hello. I enjoyed the delicate and informative video. I'm looking forward to the future videos. Thank you.
@michaeltrilck5680
@michaeltrilck5680 2 жыл бұрын
Thanks for your explanation and the look in the drivetrain!!! I remeber mine FMS 1/6 Willys MB 3 year ago… the drivetrain of the 1/6 Willys was well greased(i change it to Bel RAY)It is newer wrong to get to the bottom of things. You get to know your RC car and know what‘s going on with it. By the way: i use BEL RAY WATER GREASE for Outborder, it does not absorb water and also protects against corrosion in/with salt water… Have fun with your FMS 1/10 Jeep YJ and have a nice day!!! 👍😀
@TrokaRC
@TrokaRC Жыл бұрын
Just ordered some shafts from you, thanks for the info. Subbed!
@oldmanjeepingandbiking9621
@oldmanjeepingandbiking9621 2 жыл бұрын
With the configuration it has it seems that you will likely end up with grease on the slipper clutch surface after some driving. Just seems like an engineering oversight to me. Every reviewer I've watched that has gone into the gear boxes and axles has the same lack of grease situation you had. As a YJ owner i purchased this vehicle and have plans to do a complete teardown and rebuild before I apply power for the first time.
@islandrc-duke1972
@islandrc-duke1972 2 жыл бұрын
Cool video and teardown
@SimplyMustGo
@SimplyMustGo 2 жыл бұрын
What's the difference in using a diff oil vs grease in the axle?
@DixielandRC
@DixielandRC 2 жыл бұрын
Diff oil generally goes in a sealed unit and not open gears. Grease is better because it stays on what you put it on.
@SimplyMustGo
@SimplyMustGo 2 жыл бұрын
@@DixielandRC Thank you. I got The Mashigan and local hobby shop told me to use the Diff oil but I'm seeing everyone else use grease.
@DixielandRC
@DixielandRC 2 жыл бұрын
No. Please use grease. I have Jims Bearings grease in stock in a little syringe that makes adding grease super easy. Its listed under Fluids on my site Dixielandrc.ecwid.com
@SimplyMustGo
@SimplyMustGo 2 жыл бұрын
@@DixielandRC Thank you!
@rccarshobby
@rccarshobby 2 жыл бұрын
Nice sharing . New subbed from me
@craigpimlott204
@craigpimlott204 Жыл бұрын
Them shaving their pins down ain’t a bad idea .smaller hole ..SSD use stock pins and I’ve sheared no end of their pinion gears on the axles ..even new gears have broken on their first run .
@WIZARDDETECTIVE
@WIZARDDETECTIVE 9 ай бұрын
What kind of power screw driver is that
@DixielandRC
@DixielandRC 9 ай бұрын
That is my power drill. Its so awesome. Grab one here: dixielandrc.com/Dixieland-R-C-Electric-Mini-Power-Tool-1-4-Bit-p431455351
@wadecombs1098
@wadecombs1098 Жыл бұрын
How’s the hard top come off? Don’t want to break it lol
@DixielandRC
@DixielandRC Жыл бұрын
I shot a video on that. How to remove the top
@wrchobby1451
@wrchobby1451 2 жыл бұрын
What program do you use to edit your videos?
@DixielandRC
@DixielandRC 2 жыл бұрын
Lumafusion
@markuspfeil841
@markuspfeil841 Жыл бұрын
Thx for upload 🔧🔩🛠✌
@jonthomas8487
@jonthomas8487 2 жыл бұрын
While I prefer kits it seems like most people buy RTR’s. For RTR folks who buy FMS I think most folks don’t plan to maintain them. No grease makes me think there’s other things they cut corners on maybe quality of metal half shafts, cvd’s, etc.
@DixielandRC
@DixielandRC 2 жыл бұрын
Who knows. Like i said. Cant have it all for 329
@jonthomas8487
@jonthomas8487 2 жыл бұрын
@Ruff Crawlers RC exactly
@trevorcourt1403
@trevorcourt1403 2 жыл бұрын
Exactly your right
@DTW-bx2vy
@DTW-bx2vy Жыл бұрын
Well any actual hobbyist tears down there RC vehicles to do mantinace every couple of runs anyways, so fully tearing down an RTR is just even easier than building a kit being you get to see it come apart as you tear it down & then reassemble it again properly.
@metomwhou
@metomwhou 11 ай бұрын
So, did you end up putting a fusion in it and if so, which one and where is the video?? 🤣
@DixielandRC
@DixielandRC 11 ай бұрын
I didnt. Lol. Someone offered me big money for it at an event after they went away. Use the fusion se You will have to cut a bit of the front battery tray thing. But wont be much to have to remove.
@owenisaacson724
@owenisaacson724 2 жыл бұрын
Hope someone make a more scale chassis for the body 😂
@alfonxoduff
@alfonxoduff 2 жыл бұрын
Why you need the grease? all 1/8 bashing/racig cars, dont use grase on the pinion/spur gear
@DixielandRC
@DixielandRC 2 жыл бұрын
Not really in that particular spot. But everywhere else its a good idea. Plus we run these type of trucks in water. Grease is a great water deterrent. Rust is the biggest issue.
@fishnrc294
@fishnrc294 2 жыл бұрын
While you are a lucky one the rest of us will never get to buy one unfortunately they have removed all there Crawlers that look like Jeeps. Jeep has sent them notice to remove them including the new Jeep you have. The value just went way up. It was high on my list to buy.
@DixielandRC
@DixielandRC 2 жыл бұрын
Yeah. I sold all I had in stock pretty quickly.
@trevorcourt1403
@trevorcourt1403 2 жыл бұрын
That’s really poor quality control surely a bit of token grease wouldn’t hurt
@DixielandRC
@DixielandRC 2 жыл бұрын
Its becoming the norm now though.
THEY'RE BACK!! Rochobby Mashigan Full Review (Part 1)
21:00
FMS MASHIGAN - Tire Tryout
12:56
DixielandR/C
Рет қаралды 6 М.
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
You can no longer buy this Big RC Jeep!  (Read Description)
17:24
FMS MASHIGAN - How to remove your top (and other things)
10:42
Fms atlas 1/10 shock fix wheels tires upgrade +
18:26
Obrothers rc
Рет қаралды 10 М.
Rochobby Mashigan Put to the Test: Trail Run
8:33
RC Girl
Рет қаралды 16 М.
Worth The Wait? ROCHobby Mashigan Jeep YJ RC Crawler
10:16
RCDriver_Online
Рет қаралды 43 М.
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН