FMS - Ranger - 1800mm - Unbox, Build, & Radio Setup

Рет қаралды 15,002

Күн бұрын

bprc.me/FMS_Ra...
bprc.me/4S_3200 | bprc.me/4S_4000
bprc.me/AR620
bprc.me/NX10
Support Us
/ brianphillips
www.paypal.me/...
bprc.me/YouTub...
bprc.me/Beginn...
bprc.me/Horizon
bprc.me/HorizonEU
bprc.me/TowerH...
bprc.me/FMS
bprc.me/AMain
bprc.me/Amazon
bprc.me/ArrowsRC
bprc.me/Banggood
bprc.me/BitgoH...
bprc.me/BuddyRC
bprc.me/CNHL
bprc.me/EXHOBBY
bprc.me/FairRC
bprc.me/FPVBui...
bprc.me/RCGoing
bprc.me/Turbin...
bprc.me/Ground...
bprc.me/EBike
✈ Please visit www.BrianPhill... to see a complete list of our affiliates.
We may earn small commissions when you purchase from our links, helping to support our KZbin channel and our family of six! Thank you!
#rc #airplane #ranger

Пікірлер: 37

@randyleazenby2351 2 ай бұрын

nice flying plane, I have one. Bounces easily though. They have never made the advertised floats available for purchase though.

@BrianPhillipsRC 2 ай бұрын

Oh really? I thought they had them for the 1.5m Cessna 182??? (Same right???)

@AK1Tantal 13 күн бұрын

Your reviews and videos are top notch! Focus is sharp, seems to be an auto focusing type camera. What is the camera you are using? Thanks to your reviews I have both a 1800mm Ranger and a 1.5m P-47. Building the used/new Ranger now, after hand surgery I will be flying again. Back into R/C after a 13 year break. Thanks so much!

@RichieRich980215 Жыл бұрын

Brian, are you on the list for reviewing the FMS P-51 1700mm? I’m hoping to see that build! Thanks in advance Brian! 👍😃

@adamrodgers2377 Жыл бұрын

I hope he reviews it, that sounds like it will be an amazing Warbird. I would enjoy watching Brian go through the build process and setup of that. Have a great day 🤙🏼

@EJ-74 Жыл бұрын

7:14 Rolled a doobie out of the instruction paper 🤣😂🤣 You guys are hilarious AF 🤣🤣 Awesome plane, 👍🏻✌🏻

@BrianPhillipsRC Жыл бұрын

OOOPS, might have been about 4:20 when we filmed that!!??!

@jjbpaca Жыл бұрын

Loved the explanation of the Dual Rate Expo's and the effect on flying.... Really like the new Radio Set-ups where you are showing the screen. Also, would be helpful to "publish" in a comment or other source the "print out" of each of the "Brian Phillips Standard Rado Settings and Switch Settings".... I like Standards and you seem to as well ... You have a lot more experience and I will accept those as defaults...

@BrianPhillipsRC Жыл бұрын

We go through them for almost every plane, but if you watch back a few planes, I bet you'll have it memorized in a few short days ;) As for "standards", more like a good starting point. Thanks for the tip, and for being here with us!

@anthonyhendricks7377 Жыл бұрын

Hi bud...... first off I love your videos!!! RC, or ,farm, they are all great. My comment is about the 400, and 500mm airplanes.. ( mostly warbirds ). I have been surching for a programmable Transmitter that will work with these planes. The Radiomaster TX16s with 4 in 1 will link up with all these small warbirds, the P47, and possibly p40 might be different. Thought you might be interested. I ordered one today. 🙂

@BrianPhillipsRC Жыл бұрын

They DO and I have a Jumper, T8SG, which will work for most of them, but I just loath the setup procedure, so haven't taken the opportunity to get the Radiomaster TX16, which I think would be the natural next step in progression of OpenTx, should we ever lean that direction in the future. Best of luck!

@leozengy Жыл бұрын

i love your channel, i learned to set up the gyro (as3x and safe) on my great planes electrifly F-16. looking forward to new aircraft reviews

@BrianPhillipsRC Жыл бұрын

Awesome!!! Thanks for being here with us!

@DetoursRC Жыл бұрын

I got balance lead extensions for my chargers. Helps alot with those short little balance leads. I dont measure throws either except one of my balsa planes that was way way too touchy.

@BrianPhillipsRC Жыл бұрын

NICE! I need those bad, plus WHERE we have our chargers, it's kinda dark, and Spektrum made them BLACK on BLACK to be "cool" but now it's HARD AS HECK to see what pin is lining up with what pin. Great idea on the extensions, we'll look into that too!

@nick_doutrnz_entertainment Жыл бұрын

Hey Brian, regarding the flashing lights. I too, do not like flashing lights. So, the cable you removed in the other video to stop the flashing, was that a special cable that made them flash? I'm trying to understand what you replaced the cable with.

@bigfhands 9 ай бұрын

Help!!! you said I should run a 6s with this plain but all the spektrum batteries that are 6s have an IC5 connection and the plain has a smaller connection compatible with IC3 and spektrum don’t have a adapter what do you suggest…

@boxlessthinker1973 7 ай бұрын

Excellent hack with the shelf liner! I will use that for certain.

@olddogg60 6 ай бұрын

Me too. 👍

@ModelShipLog 10 ай бұрын

This would be a nice taildragger like the new carbon z Cessna, I can only fly on rough terrain and had but experiences with tricycle landing gear

@roedere Жыл бұрын

You must your UPS and FedEx drivers by name! 😊 I have used that Dubro angle measure thingy to verify flaps and other surfaces deflect to ensure they match.

@youknoweverything7643 Жыл бұрын

I love this plane and love every single fms plane I own. I got the skytrainer v2 and fell in love with fms and now have 10. Planes from them and this is the newest one to the fleet. I'm not using any flight stabilization cause the fms planes in that style are very stable and fly amazingly scale and light aerobatics

@tommyelliott1995 Жыл бұрын

Love this channel! I recently got back into the hobby a few months back, worked my way through all the UMX's park flying then joined a local club where I started larger scale flying with an aero scout and apprentice sts. Looking forward to my maiden with a turbo timber evo this weekend. Which makes me wonder what would be a good next step after the timber? Possibly a eflite t28 1.2m?

@tommyelliott1995 Жыл бұрын

i should clearify by way of working through umx's: I started with the radian- cub- timber- twin otter- mig 15- pitts. Grass plopping is totally different compared to actual asphalt landings though. The timber went smooth and I'll stick with that for a while but after studying your videos I think its wise to start with the piper as a next plane after the timber than the t-28. Would you agree? Seeing as the gear on the t28 doesn't seem as sturdy? or rather nimble?

@regs3836 Жыл бұрын

I’m curious about your thoughts on remote ID and how those of us new to the hobby should deal with it? In some ways I feel like my new hobby is coming to an end!

@barneybarney4989 Жыл бұрын

Did you get the PNP or the BNP like to get one but not sure. Very new VERY NEW haha

@BrianPhillipsRC Жыл бұрын

This particular plane only comes in a PNP option. FMS offers 3 finish levels on their airplanes: RTF = Ready to Fly - This includes the plane (with receiver installed) and a basic transmitter to go with it. It also (usually) includes a flight battery and charger. PNP with Reflex = Plug and Play - This is JUST the plane with a Reflex flight stabilizer installed. No receiver, transmitter or battery. For these planes we use an NX10 transmitter ( bprc.me/NX10 ) and recommend NON-stabilized receivers like these: bprc.me/AR410 bprc.me/AR620 bprc.me/AR8020T PNP = Plug and Play - This is JUST the plane. Only. For these planes, we still use the NX10, but recommend a stabilized receiver with AS3X and SAFE: bprc.me/AR630 bprc.me/AR631 bprc.me/AR637T bprc.me/AR8360T Which receiver you need, depends on the setup and channel requirements of the plane. If you are VERY NEW ;) We typically recommend a RTF option. The transmitter isn't as fancy, but you can get up in the air relatively cheap. If you like the look of this plane, check out its little brother... kzbin.info/www/bejne/Z6C5oHeVf8qHg7c that comes in a RTF option. Or check out : www.brianphillipsrc.com/beginnerplanes to see our whole list of recommendations!