FMTV door panel upholstering

[@HelicoolsHelipad]

Nice looking door panel. I was wondering how easy it was to remove those new clips? My doors need adjustments to fit and work properly from time to time, and some of the adjustments for the door are behind the panel. I chose to ditch the bottle brush clips and go with riv-nuts. Of course, the allen head bolts i used are visible, and I know that was not the look you wanted. Nice instructional video!

[@NEILSWORLD]

Ironically I didn't have a door panel on there for months and after I did this door panel I've had to take it off twice to work on the door handle. With the proper tool it's not that hard to get them out of the holes.

[@HelicoolsHelipad]

@@NEILSWORLD Thanks for getting back to me. The project turned out great!

[@johnrushing9469]

Thank you for sharing. What type of spray adhesive did you use?

[@NEILSWORLD]

I used 3M headliner and fabric adhesive

[@dcraigslist5243]

Where did you get the arbor for the annular cutter? I am about to do the same mod. Thanks!

[@NEILSWORLD]

I was using a tool like this www.amazon.com/Hougen-11075-RotaCut-Fractional-Cutter/dp/B003LY4E0Y/ref=asc_df_B003LY4E0Y/?tag=hyprod-20&linkCode=df0&hvadid=309869401414&hvpos=&hvnetw=g&hvrand=9889566288448369850&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9003022&hvtargid=pla-568935713205&psc=1&tag=&ref=&adgrpid=63364097444&hvpone=&hvptwo=&hvadid=309869401414&hvpos=&hvnetw=g&hvrand=9889566288448369850&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9003022&hvtargid=pla-568935713205

[@roceye]

Blair Cutter FTW!

[@NEILSWORLD]

Makes a very nice hole