Focus ST TTR Intake Manifold Installation

www.patreon.co...
This seems like a quality product...
www.turbotechra...

[@Rebecca_The_Dragon]

The guy flying in front of the camera after you said "Wrench On" scared the fuck outa me! XD

[@FatGuyBuilds]

never noticed that!! lol... PINNED!

[@cottonrbxx]

church sign thing lol. great helpful straight to the point no bs time wasting video i love it good job!

[@FatGuyBuilds]

Thanks For Watching!!!

[@ItsRiley3]

Hey dude @0:45 there is a decent picture of your stock manifold. On the far left cylinder, is yours burned off a little on the top? It looks like it...and I found what looks to be the same problem on mine. Any reason you replaced the stock part? Was it cracked like mine on the far left cylinder? Here is my problem kzbin.info/www/bejne/Y3PXYnaej6h_mrc

[@FatGuyBuilds]

I got a sponsor deal so i changed it

[@xjo2hx2442x]

Did you tune this after installing? Also can you run this as is without a tune? And will locktite do the same as Right stuff?

[@FatGuyBuilds]

no, tune besides cobb OTS tune. been running cobb OTS for 100k miles already. Locktite and right stiff is not the same. one is RTV and one is thread locker.

[@johnfletcher1343]

Hi there, just wondering where i can buy this music from at the start

[@FatGuyBuilds]

@@johnfletcher1343 moog from might car mods. He is Australian

[@Boosted_collectibles]

Can you add aux fuel with this manifold or will it not have the room?

[@FatGuyBuilds]

I believe u can use the ports on the front. But if u mean 4 extra injectors. You would need to weld in bungs and fuel rai mounts

[@pearldrums92]

For goodness sake man give that thing a wash before filming it....

[@FatGuyBuilds]

KeganSi dude my videos are all real life. I dont bullshit people and i keep everything real with everyone.

[@pearldrums92]

Jason Georgievski lol my dude I LOVE IT... I can appreciate the reality. just please... find some time or better yet, have it detailed! It deserves it and you support local business!

[@centraltexasfoxbodies]

@@FatGuyBuilds hey man who makes t he spacer you removed? I cant find one that is knife edged like that and I want one.

[@mikecam94]

@@centraltexasfoxbodies Idk what brand he has but steeda and boomba make one with a similar design

[@MasterCarguy44-pk2dq]

This thing is a show piece nothing more. Makes no power. I did a port and polish on a stock foc st mani and it flowed 12-13% more. Estimated 6-7hp. Slight torque loss though. Torque is only good for launch and low speeds upto about 60 mph for freeway passing, etc. Honestly, mazda ops I meam Ford kind made this sporty looking and handling without the power to go with it. EcoBoost means economy withboost. Ford has twin turbos (the V6's) and single turbos (the 4 cylinders or lower), and really didn't market the ST well. And since it is Mazda architecture, aka MS3 speed, but only a 2.0L, It is what it is. The Mazdaspeed3 2.3L turbo ended up in the Mustang, Foc RS and Lincoln products. Now it is in s few other Fords. Oh and finally in the 2020 Foc ST which is in a slightly redesigned Mazda 3 body. Glad we font got the 2020.

[@FatGuyBuilds]

i pretty much agree with you. it sure does look good though.

[@Saren_95]

Appreciate this video! I’m doing my baffle plate and catch can and no videos told me how to properly undo each sensor!

[@FatGuyBuilds]

Thanks man. Subscribe for more.

[@anthony2816]

Thank you for being the only KZbinr I found on this topic who gave a detailed explanation of how each clip comes off. It was really helpful.

[@FatGuyBuilds]

Glad I could help!

[@itsjustdibella]

what brand was that spacer?

[@FatGuyBuilds]

www.steeda.com/steeda-555-3183-focus-st-intake-manifold-spacer

[@SR_KSERIES]

Good upgrade thumbs up cuz yeah plastic manifolds under pressure can have hair cracks with the heat of the engine also dont help my point of view same goes for plastic radiators found on some subees.

[@FatGuyBuilds]

Thanks For Watching!!!

[@its_mysterion]

I'm full bolt on and tuned by cobbs stage 3 acessport. Looking for other mods to do and considering this manifold. Did you notice power gains with this manifold? And also will this get in the way of the oil catch can?

[@FatGuyBuilds]

I would do suspension braces first from TB performance. Better use of the money. I have videos on those too

[@its_mysterion]

@@FatGuyBuilds yes I was going to get there traction bar, and stedas rear sway bar. I'm on lower springs but I'm considering switching over to a set of coilovers for even that much more performance.

[@davidtparvin31]

I installed mine by watching this video. Got mine tuned. Did a base run before and after. Gained bout 8 hp and 32 lb of tourque. Video helped out alot

[@geoffnelson64]

No way

[@FatGuyBuilds]

nice

[@codyleavelle4082]

So you had to go get your own new hardware bolts or did it come with some?

[@FatGuyBuilds]

I am pretty sure it came with some. but I liked to buy my own.

[@paposworld]

Hey bro you made that look easy . Great video. Hope to get that done soon.

[@FatGuyBuilds]

you are welcome!

[@boostedmule2201]

Hey how is the manifold working for you?

[@FatGuyBuilds]

Thanks For Watching!!!

[@aztlanmerlin]

Does it fit on a fusion?

[@FatGuyBuilds]

I dont see why it wouldnt fit. Same engine And everything

[@patricksoler]

Thanks for this. Love the explanation

[@FatGuyBuilds]

Thanks For Watching!!!

[@joselimon5443]

How much hp gains? 😀

[@FatGuyBuilds]

hotboy Limon probably none. Just bought it to have. And make a video.

[@tomasperez7158]

Thanks for the awesome video

[@FatGuyBuilds]

Thanks For Watching!!!

[@2016RoadkingRider]

No start up after math 🤔🤷🏼‍♂️

[@FatGuyBuilds]

What?

[@2016RoadkingRider]

@@FatGuyBuilds I wanted to hear it after

[@FatGuyBuilds]

@@2016RoadkingRider no sound difference!

[@2016RoadkingRider]

@@FatGuyBuilds how about performance i want to do that plus I like the way it looks as well

[@FatGuyBuilds]

@@2016RoadkingRider I couldnt notice anything in the seat. i never dyno'd it

[@stanleycarter7574]

Awesome video, I was wondering if you could feel performance loss/gain when you put this on your car, I am wanting to put this on my Focus, but I am worried if it gets too warm since it is made out of aluminum. PS: Would you recommend this upgrade for a ford focus se 2013,I am 16 and build cars with my grandpa, and I would really like to make my focus par with a focus ST. But it is a bit harder because of the lack of upgrade videos for a ford focus, so it is kind of hard for me to find ideas for my car. If I could get some suggestions for my car I would really appreciate it. Btw leaving the specs for the 2013 ford focus st and 2013 ford focus se. Ford Focus se 2013 Hatchback Base engine type I-4 Horsepower 160 Hp Horsepower rpm 6,500 Torque 146 Lb-Ft. Torque rpm 4,450 Payload 827 Lbs. Drive type Front-Wheel Turning radius 18.0 '' Ford Focus ST 2013 hatchback 2.0L I-4 Engine 6-spd man w/OD Transmission 252 @ 5,500 rpm Horsepower 270 @ 2,500 rpm Torque Front-wheel Drive type

[@FatGuyBuilds]

just find a ST1.. they are cheap and they are everywhere

[@pfeilercrx]

Dude how did you get the sensor that’s on the manifold plugged in? It’s being a pain to get this one on

[@FatGuyBuilds]

lube the oring with wheel bearing grease. then wiggle back and forth and it will go right in.

[@kylekroplin]

so you ran the B.O.V. line to the nipple on the new intake manifold, i have a boobma racing B.O.V. would i have to change that or can i leave it as is and not use the nipple on the new intake manifold ?

[@FatGuyBuilds]

kyle kroplin where is yours connected right now?

[@kylekroplin]

right now i have a boomba racing B.O.V. that is in the same location as the stock B.O.V. located behind the front passenger wheel. The cobb symposer delete (which ill be getting this week) also has a slot for a B.O.V. line to be ran to. i was just going to leave my B.O.V. hooked up the way it is now, i don't believe it would have any negative effect.

[@FatGuyBuilds]

function is slower when hooked up that way, from what i read. it is up to you. I am sure it will work just fine.

[@FOX11GUY]

But the air isn't being sucked in. It's being pushed in. That spine shouldn't affect it when boosting.

[@FatGuyBuilds]

It MOST Def does affect the air flow. call any shop that runs a flow bench. do some research. it creates turbulance that with slow and ruin smooth and fast airflow into the runner.

[@zeropointstar]

Affects boost times.

[@entertainment72]

Good stuff.

[@FatGuyBuilds]

thanks!!!