Folding a RIVAL X

[@rogerlarson8040]

I love my Rival X wing. We flew yesterday in some of the roughest turbulence i have flown in Near Parker Arizona. The Rival X wing was great in this turbulence. Thanks for this video, it helps the trike world. :)

[@AV8R_1]

Nice job! I highly recommend e-tracks for your trailer!! The tie down points will be stronger, and you can vary the position of the aircraft more in the event that you need to. Great tutorial video as always Larry!

[@user-jz3op2ss1p]

Saludos desde Sur América, gracias por el vídeo informativo.. 👍👍👍👍👍

[@kayakconmarcelosammito2494]

A beautiful revo

[@AV8R_1]

I'm getting ready to pull and inspect all my battens for splits or cracks at the tips. Is there a method to do this without completely relaxing the wing? I see you can get all the under-surface and tip battens out and the outboard top-surface battens, without relaxing the haul-back. Can every Batten be inspected one at a time without going all the way short of folding the wing back?

[@LarrySMednick]

No, as the camber gets larger towards the root of the wing you can either deform the batten or tear the batten pocket by trying to remove or insert a batten into a fully tensioned Wing even if you try to do one at a time.

[@AV8R_1]

@@LarrySMednick I figured, but I was hoping to be able to inspect them one at a time. Can I just inspect the underside, and outboard uppers one at a time replacing them as I go, then loosen the haul back to pull the inboard uppers one at a time for inspection? If I loosen the haul-back, but don’t actually fold the wings back it wouldn’t damage any of the battens or pockets correct? Basically I’m just asking if it’s possible to inspect the battens one at a time rather than pulling them all and having a pile of 40 battens on the ground and then putting them all back in after the inspection. Thanks for taking the time to answer me by the way I appreciate that considering you are likely extremely busy getting ready for SNF right now.

[@LarrySMednick]

If the wing is strut braced then you can detention the wing, but if the nose is up it will try to collapse back. if it has a king post you typically need to break the wing down on flat ground. It is possible to pull one at a time but not preferable.

[@saeedmohammadi6202]

hi.what is the length of the wings and the type of wing fabric. thankes

[@AV8R_1]

Larry, do you have a video of unfolding and setting the Rival X back up?

[@LarrySMednick]

will try to make one soon.

[@stidwell205]

How long was this trailer? Looked like they had more than enough extra space. I know you guys recommend an 18' trailer, but I would love to know how tight would it be in a 16' with a V-nose. Trailer is cheaper and easier to maneuver vs 18'. Thanks.

[@LarrySMednick]

I believe that is just a 16’ V nose trailer.

[@Thobaymrphuong]

I want to buy a 2 seater. please advise me about the price and design, material

[@LarrySMednick]

Please see our website which has all models and pricing evolutiontrikes.com

[@asmorocaio]

clean and clear 👌

[@dinnyconway695]

If I had da money I'd buy one

[@roberts5664]

Larry its SUPERRRRR ;)

[@pioneer6432]

please write how much money does such a hang glider cost ???.......this is a question from Russia )))

[@LarrySMednick]

www.evolutiontrikes.com

[@pioneer6432]

@@LarrySMednick were you sent to Moscow ? were there any buyers from Russia ? ...thanks for the answer

[@antoniocarlosregodeoliveir5510]

Larry, tradução vídeos em Português.

[@laxmantanwarcell]

How many cc engine does it have ???

[@LarrySMednick]

1300

[@laxmantanwarcell]

@@LarrySMednick thank you sir

[@julien23lastchristmas2]

Mr Lary : how much this ULM Price please ??

[@LarrySMednick]

evolutiontrikes.com/revolt-pricing/

[@ChauNguyen-kf1gr]

how much one fly? huhu

[@LarrySMednick]

evolutiontrikes.com

[@albertoyanez3029]

Hola deseo saber los precios , vivo en bolivia , Beni , San Borja

[@Nguyen-jx5hl]

Can you add Vietnamese subtitles? I want to watch the video but I don't understand it

[@LarrySMednick]

KZbin may offer an English transcript that you can translate.

[@naseerkhan2241]

Wao beatfull

[@มดแดง-ฃ3ข]

ถ้าคุณอยากจะทำธุรกิจที่นี่ฉันก็แนะนำให้ได้มันมีชมรมการบินเอกชนมีหลายที่

[@muhammedercan4470]

Hello I am Muhammed I write you Turkey Canwe buy this car? Can we

[@LarrySMednick]

[e-mail]

[@kennethclaar922]

@@LarrySMednick hi Larry are you in Florida .and could I take lessons there.I am from Lancaster pa

[@LarrySMednick]

@@kennethclaar922 yes

[@milsonlip1422]

Help me.disainer wing.trike sir.. thanks.?

[@คมกิตพึ่งโพธิ์]

ราคาเท่าไรครับ

[@LarrySMednick]

evolutiontrikes.com

[@ГеннадийАндреев-р2с]

Здорово!