Ford 4610 Clutch install

We install our rebuilt clutch from ACC rebuilders of Memphis with a resurfaced flywheel.
ACC Rebuilders Inc 901-774-5874 www.accrebuilders.com
DISCLAIMER
Automedic Garage does not own nor claim the rights to any songs in this or other videos. This video is intended for informational and entertainment purposes. Always follow manufacturer and professional practices/advice when performing maintenance and modifications to any vehicle. Automedic Garage is not responsible for any damages or injuries incurred from attempting work portrayed in this video.
Composer Name: ​WAVETOYS Song:INNER FIRE IPI number: ​00861760815
Music from KZbin Audio Library [Aka YAL]
Music provided by RFM: • Video ​
Musictoday80:
/ ​
/ musictoday80​
/ ​
kzbin.info/door/xsF...
Music from Soundcloud
Music provided by RFM: • Video ​
Music from KZbin Audio Library [Aka YAL]
Music provided by RFM: • Video ​

[@camperjack2620]

Great teamwork. Awesome tractor. I have both a 3000 gasser and a 3600 3 cyl diesel, going to be double checking your videos once or twice.

[@brinkybrink]

I just put a new clutch in my 3930, in my garage with a concrete floor. I used a shop crane and a floor jack. When I tightened down the pressure plate, I tightened each bolt just a little at a time in a criss cross pattern. I torqued it after all the bolts bottomed out. I easily pulled out the alignment tool with one hand. I use 8" bolts on the bell housing as a guide to put it back together. The smooth floor made it go back together pretty easy. I bought my clutch from 'KY Clutch' great parts and prices, they also resurface my flywheel. Thanks for the video.

[@paulcoote3094]

Excellent video. Well done with the repair. Good to see you working with your ol man.

[@mikeoneil2281]

haven’t seen that done since i was a kid a long time ago y’all did a good job hope the seal took care of the leak it probably did anyway good to see ya it’s good to work with dad mines gone but we used to do that stuff when needed.

[@AutomedicGarage]

Seal fixed it, nice to have that tractor back. Me and my dad have built and fixed a ton of stuff together. Thanks for commenting. Stick with us.

[@cliffyfellows38]

Best video I’ve seen on clutch and splitting. My 5000 has stuck clutch and some water leaking from where front front bolts to bell housing. I now have the inspiration to get same job done as you did cos I can’t see how to find an inspection plate to free clutch from flywheel. Thanks heaps.

[@AutomedicGarage]

Sure thing, thanks for watching.

[@aconnelly9534]

Love the old 4610 - mine is almost identical -- love the wristband too :-)

[@frhanjuttt6129]

good job

[@bigtxbullion]

Wow. A $3 seal and a pile of time and effort 👌

[@AutomedicGarage]

Yep, but it’ll last for another 35 years now at least. Thanks for watching.

[@bigtxbullion]

@@AutomedicGarage yep. Its amazing what a small cheap part can do. if only they never went bad you could avoid all that work. We have a flooded 2019 tractor with less than 60 hrs and they are splitting to replace rusted/seized clutch. Way worse that a seal but this job was too big for me and my dad doesnt know anything like yours lol. Curious how much the resurfacing cost? Congrats! 🤙

[@AutomedicGarage]

@@bigtxbullion I think it was $100

[@marcgordon2416]

Nice film,you did a good job. I missed some thinks that i usely do . 2 pice of wood put it left and right by the front axle between the axle and the front of the tractor so that the tractor can 't move . And the second thing i missed or i didn't see,put some spray on the axle that Into the clutch. But it can be you do this but its not on the film. I see its a lottle of work and you al did it good,wel done.

[@AutomedicGarage]

Thanks for the compliments. We did block the tires after rolling it forward and also blocked the rears. I didn’t spray anything on the input shaft, I didn’t really see a need to. Thanks for watching.

[@raihaseeb896]

GooD Work

[@smittys19daytona]

did it have gasket between the engine and the plate? manual I have is so incomplete, the cork gasket seems so thick, there is no groove for it and creates a gap, just went through a 70 4000 completely paint and all what a job

[@AutomedicGarage]

No gasket. Metal to metal.

[@tonibueltemann5516]

Is that a racing clutch?

[@ernielucas6544]

What did you use to clean the inside of the bell housing? Looks likes it worked like a charm

[@AutomedicGarage]

Purple power and brake clean

[@ernielucas6544]

@@AutomedicGarage thank you

[@ghulabkhan762]

Good morning

[@wonderdog3353]

Where can I get the alignment tool

[@AutomedicGarage]

It didn’t come with my clutch, I had it from a previous job. I think yesterdaystractor.com may have them. Thanks for watching and commenting.

[@haycountry117]

What do you set the clutch free play at on a 4610. I just recently bought one

[@AutomedicGarage]

I’ve always set my 6610, 4610 and 4000 where you depress the pedal around halfway to begin engaging the clutch.

[@gmsecure3350]

What was the seal called? Do you still have the part number? I have a Ford with the same problem, clutch will not release until the engine is hot.

[@AutomedicGarage]

Let me do some digging.

[@LifeModder]

Were you able to find parts for 8x2 synchronize shuttle transmission? Looking for synchronizer I have a Ford 4630

[@AutomedicGarage]

Not sure mines not a shuttle shift. I’ve never messed with the 30 series tractors.

[@hscnxsh]

How long does it take for the whole job ?

[@AutomedicGarage]

If you have everything on hand you could do it in a full day.

[@houstonjones3581]

You have another seal in the part you had out.

[@AutomedicGarage]

Are you asking or telling me?

[@houstonjones3581]

Telling

[@AutomedicGarage]

Ok I had 2 different parts off, the PTO shaft which I replaced that seal and the input shaft which I replaced the seal in also. But I only replaced the inner most, I couldnt get my hands on the outermost after yesterdaytractors.com sent me the wrong seals and I had to go to my local New Holland dealer which only had the inner.

[@houstonjones3581]

@@AutomedicGarage Ken T

[@gulabkeerio1930]

v n job