Ford Bronco how-to mount winch with adaptive cruise CBI OFFROAD Hybrid Bumper

I installed a Warn 10,000 winch on the front of my Ford Bronco Wildtrak with Lux package. This CBI Offroad Bumper only weighs 3lbs more than the factory steel modular front bumper and allows full operation of the adaptive cruise control! Ill be installing CBI Offroad rock sliders very soon too.
CBI Offroad Affiliate link:
cbioffroadfab....
WARN VR EVO 10-S WINCH - 103253
Part Number: 103253
www.warn.com/v...
Factor 55 Ultra Hook
factor55.com/p...
FOLLOW ME ON INSTA
...
AFFILIATE LINKS AND DISCOUNTS
linktr.ee/adve...
Take a dive into my Offtrax Feenx Overland trailer:
expeditiontrai...

[@garyzimmerman8679]

I’m out on this bumper, I don’t want to have to cut or mod anything that isn’t 100% reversible.

[@KonaFocus]

Just picked up a FPP winch kit. Couldn’t pass it up, they are on clearance at Ford website, and had a 20% off coupon. It’ll go on the factory mod bumper for now, but I know what the next big purchase will be 🤣😂

[@ChaseGentry]

When there’s a good deal you gotta jump lol 🏁💪

[@neverendingweekend]

lol. Laughing through this video because I went through the same hassles. Except my bumper was a one-piece. 😅 Wondering how you adaptive cruise is doing. Still working? Mine never worked dependably and I’ve been avoiding all that disassembly to figure out why. (Winch/bumper/grill 👎) Thanks for the vid.

[@ChaseGentry]

🤣🤘🏻thanks for watching!

[@stevenjohnson1824]

Did you reinstall the shutters on the oil cooler? I wonder if they are necessary or could just be deleted and if deleted does it give any error codes on the dash?

[@ChaseGentry]

I did and no codes it’s all mechanical 🤘🏻

[@ronaldsteiger7562]

One question.. Why are you doing this in your home garage… didn’t you just take a leap and get a workshop for yourself ?? Home garage should be for setting up a crib !! Or playpen… start working on that bro 👍

[@ChaseGentry]

Lol this was filmed a couple months back in between two long trips I took. This year has been super busy lol

[@christopherenoch4230]

That is NOT only for adaptive cruise, it's ALSO for Crash Avoidance. That's why it's low and looks forward. That relocation is dangerous for small people/objects.

[@DrXtoph]

I heard that the emergency brake assist is from the rear view mirror portion of the windshield. Does anyone know if that's right? Can anyone confirm if any of the above-mentioned technologies' performance are affected with the sensor relocation?

[@ceecee2485]

Makes me glad we went with the standard package - no sensors, baby!!! Great video. Thanks for the Bronco content.

[@ChaseGentry]

Awesome! Glad it’s was helpful or enjoyable! Thanks for watching my stuff I really appreciate the support it’s very helpful and encouraging 🙏

[@jackie_gentry]

So glad you have your shop now, lol the horse clips 😂😂😂😂

[@Bob9999]

Have you considered purchasing a tripod for your camera.

[@ChaseGentry]

I have several.

[@obx512]

Nice. I’m going with the rough country hidden winch for the modular bumper.

[@joesumney]

Top pick in my search so far, but site barely has any info. Compatible with factory steel skid? How's the camera impacted? Planning on going with prerunner tube work if CBI wins.

[@ChaseGentry]

Factory skid does work. No interference. Camera does have a relocation kit included i however didn’t feel it was necessary personally. Front view is still good

[@patkelly2284]

Thanks for the video. How is the front camera image. And are you also relocating the camera.

[@ChaseGentry]

Damn!! I totally forgot to show that!🤦🏻‍♂️🤦🏻‍♂️ I’m not relocating it. While u do see bull bar the camera feild of view is so wide it’s still completely useable

[@JKryptonite21]

Kinda glad I went with high package .. don’t feel like I need the adaptive cruise , BO sound , etc … I will miss the Heated steering wheel until I can replace that. Also what kinda bike hangers do you have on the wall. I need some. 😂. Good video, can’t wait to see bronco put new parts to use. If needed.

[@sandrak.1899]

perfect! Now just have to test it works ;-) You made it look much easier than the other video

[@scottfiresign953]

I have a 2021 Ford Ranger. I added a winch to the front of my truck and relocated my adaptive cruise control also. It now doesn't work properly. Does it need to be recalibrated for the new location and if so any idea on how to do that. It now goes off everytime I hit the brakes. I specifically wanted that option when I bought my truck so I would rather not have to disable it. Any ideas?

[@ChaseGentry]

That’s weird. I haven’t had that issue. May want to contact the bumper manufacturer

[@adamwebber9547]

I'm sure your feedback to the bumper company will motivate them to make the sensor harness fit the Bronco bumper. Long day, hopefully you'll be filming in your new temperature controlled shop soon?? Thanks for showing this, and, only 50 lbs overall net gain. Coolio!

[@ChaseGentry]

DEFINITELY will be filming there from now on. This was actually filmed a couple months when I was home for like 7 days. It’s been a busy year. Ironically i actually filmed a Ford Maverick lift install today at new shop in 72 degree AC SO NICE 😂🙌

[@JKryptonite21]

Kinda glad I went with high package .. don’t feel like I need the adaptive cruise , BO sound , etc … I will miss the Heated steering wheel until I can replace that. Also what kinda bike hangers do you have on the wall. I need some. 😂. Good video, can’t wait to see bronco put new parts to use. If needed.

[@ChaseGentry]

Love the heated wheel 😂👌😮‍💨 and I got them on Amazon I’ll see if I can track them down

[@adambrown2096]

Loved the video. After running this bumper in the "low" position, any regrets? I am considering this bumper but I am worried that installing it "low" will negatively affect front ground clearance while rock crawling.

[@ChaseGentry]

No not at all. If you look real close I’ve still been able to make it make contact with the fenders. But not substantially enough to cause damage. So any higher would be an issue. Love the bumper it’s taken a beating

[@DrXtoph]

@ChaseGentry any consideration of hidden winch mount, why/not? It's made for/by Rough Country, and has a synthetic line. Would you be willing to advise? Also, did this installation you did affect your approach angle?

[@ChaseGentry]

I do like the RC Mount actually I thinks is a great setup from what I’ve seen. My bumper probably did affect approach a tad but super minimal.

[@ronaldsteiger7562]

Chase I keep seeing more and more Broncos just plain dead. No juice to anything in the Bronco. Seems many have to have it towed in and most people don’t know how to get the automatic transmission into neutral so it can be towed. How about a video on how to get the boot off so you can put the shifter into neutral when we have no juice. Thought it would be helpful ! Thanks Ron

[@ChaseGentry]

Let me do some homework on that great idea

[@mrblackgabe]

Great video but please put a fuse on that power wire.

[@donnyreeve6497]

I am curious to know if your adaptive cruise control works after relocation? I had mine relocated using fabfours relocation and it is in same spot but doesn't work. It keeps giving mexan error code stating sensor is blocked.

[@ChaseGentry]

No issues in the last 15k since install

[@alydubois]

Just went though this with a customer. Excited to show them this!

[@ChaseGentry]

Perfect! I figured as much I get asked ALL the time lol

[@mrbohn23]

How does your adaptive cruise control work now that you relocated it?

[@ChaseGentry]

No change in its operation in 60k

[@ericacosta8662]

Has the relocation affected the function of the adaptive cruise control at all ??

[@ChaseGentry]

No operation has been the same the last 15k so far

[@gods_country_overland]

Great video as always. Couple things about this. So I @gods_country_overlanding decided to go with the ARB Summit. It handles all the lux as well. First glad I wasn't only one that started in light and ended in the dark. Less sensors and no ADD will make a huge difference as he said on install time. One huge thing I like about this setup over mine is 2 pieces. Not fighting one big unit makes this a very nice setup. Easy winch install and wiring without so much in the way. Also this total unit is about 50lbs light than an ARB if you include the winch on both. CBI makes great quality products. Hope they listen to yiur suggestions on wiring harness.

[@ChaseGentry]

Thanks! ARB also makes great stuff too. I actually considered that one too actually. Weight was the swing vote for me 🤘🏻

[@gods_country_overland]

@@ChaseGentry It was good seeing this one installed to compare real notes. Don't know about you but some necessary steps missing on directions.

[@FieldWorxoverlandadventures]

Did you take front end height measurements before installation of winch and bumper? How much did the vehicle drop on the front end with the weight?👍

[@Lethal_Venom]

Wow that’s quite the process! Looks really good though

[@ChaseGentry]

Definitely was a bit more than expected but worth it in the long run

[@Lethal_Venom]

@@ChaseGentry always good when that’s the outcome

[@obs_j.a.g]

Awesome 🤘🏽

[@riveroutdoors]

Sick shirt!!! Love it. Cheers bud

[@ChaseGentry]

Yea those guys are dope 😂😉🤘🏻🤘🏻🤘🏻

[@richrichardson7602]

Great video chase

[@ChaseGentry]

Glad you enjoyed it

[@technicaldisasters]

Great video!

[@ChaseGentry]

Thanks 🙏

[@flojuarez8955]

What did you do with the old bumper?

[@ChaseGentry]

I still have it

[@flojuarez8955]

@@ChaseGentry I thought I ordered the modular bumper for my badlands, But I believe I got the capable bumper, Would you be willing to sell it and how much.

[@ChaseGentry]

@@flojuarez8955 unfortunately I can’t sell it. This bronco belongs to Ford and I might have to give it back.

[@flojuarez8955]

Well please 🙏 keep me in mind.