ford clutch push rod repair part 1

[@jonbell7296]

Your video helped me alot dont listen to the other negative views

[@rcwarship]

Heya Poorboyz, I'm with you! Use what you got & get the job done. Thanks for the video, I've got to tackle this job next week, what else does a guy do with his vacation time but a brake job & this mod? . Just got a heim joint mod ordered from ebay. With the pin being so stubborn, may I suggest drilling it out with bigger & bigger bits until you get close to the bracket hole size? The drilled hole will allow the remaining metal to deform inwards when you punch the pin out. Thanks Again & Best Regards, Jon

[@davidwilder7109]

Use what you got. I've had to fix a lot of things "the wrong way" due to not having all the tools needed.

[@montanaliston6084]

Hey so this problem just happened to my 1992 f250 7.3 diesel, I really would appreciate it if you could give me a link where to buy one of these. I need and miss my truck already :'( I need an answer asap please I need to order it quickly

[@garrettsgarbagegarage7970]

m.ebay.com/itm/like/261916068931?lpid=82&chn=ps&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmtid%253D1588%2526kwid%253D1%2526crlp%253D53601919689_324272%2526itemid%253D261916068931%2526targetid%253D87946132209%2526rpc%253D0.23%2526rpc_upld_id%253D50676%2526rlsatarget%253D%2526device%253Dm%2526mpre%253Dhttp%25253A%25252F%25252Fwww.ebay.com%25252Fitm%25252Flike%25252F261916068931%25253Flpid%25253D82%252526chn%25253Dps%2526adtype%253Dpla%2526gclid%253DCjwKEAjw4-SrBRDP483GvreDr2ASJAD5sCIuwsu_-aoxNHAcg_YGzQVqSLTVjUapUQYrdoTvkEYohRoCxm7w_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D847183621134&ul_ref=http%3A%2F%2Frover.ebay.com%2Frover%2F1%2F711-117182-37290-0%2F2%3Fmtid%3D1588%26kwid%3D1%26crlp%3D53601919689_324272%26itemid%3D261916068931%26targetid%3D87946132209%26rpc%3D0.23%26rpc_upld_id%3D50676%26rlsatarget%3D%26device%3Dm%26mpre%3Dhttp%253A%252F%252Fwww.ebay.com%252Fitm%252Flike%252F261916068931%253Flpid%253D82%2526chn%253Dps%26adtype%3Dpla%26gclid%3DCjwKEAjw4-SrBRDP483GvreDr2ASJAD5sCIuwsu_-aoxNHAcg_YGzQVqSLTVjUapUQYrdoTvkEYohRoCxm7w_wcB%26srcrot%3D711-117182-37290-0%26rvr_id%3D847183621134&_mwBanner=1 I am sorry for the late reply

[@papajon6715]

Heat almost always helps loosen stuck steel fittings, and penetrating fluid. The fluid will smoke but that's life in the big city. A chunk of steel and some clamps (or more vice grips) are your friend.-just sayin'...

[@garrettsgarbagegarage7970]

I was using what limited tools I had at the time. If I did it now I'd grind it then put it in a vice and air hammer it out.

[@clintdonovan6257]

What if mine is plastic

[@garrettsgarbagegarage7970]

What is plastic?

[@GOLDTRADERRR]

When you were trying to hammer out the pin after grinding off the weld, instead of hammering it against the sidewalk, you should lay it across a vise or some other surface with an opening just wide enough to support the bracket but let the pin fall through the opening of the vise or other surface with a hole in it. The way you did it, the pin had no freedom to be driven out.

[@garrettsgarbagegarage7970]

Cedric Ward I just used what I had and it worked great

[@evanjohnson4137]

“I don’t have a vise, guess I’m using my boot” did you not hear it?

[@macgyver7.574]

At the very least I would have used a Ball Hole in the bumper instead of beating my paint to death and wrecking my bed. I've used my bumper as an anvil on many occasions works pretty good

[@jameshaines3370]

No vise. Use a socket to set the pin into. Go to Menards and get a real hammer. I'm sure if u have kids their missing the tack hammer you got.

[@craigmuir5271]

I was waiting for him to wack his thumb.

[@garrettsgarbagegarage7970]

Thanks for watching. Like and subscribe and your wish might come true.

[@wolfkarneffel6701]

any reason you can't just cut and bore the pin why cut off the push rod

[@radroofer]

I googled how to remove clutch pushrod in 2002 ford ranger? and got this. can anyone answer my question?

[@acemay3]

Yeah buy a old Toyota pickup with 22re they will last for ever and just a fyi ford went back to a cable clutch for mustangs hummm makes u think why. oh wait I know cable works every time

[@DRT-81]

Zip tie ?

[@garrettsgarbagegarage7970]

DV8 are you asking what a zip tie is?

[@emdman1959]

To bad he is trying to hammer it out the wrong way, talk about backyard mechanics. wow.

[@garrettsgarbagegarage7970]

thanks for showing me how it's done bub. good job pal.

[@michaeloneill822]

holy shit! how long you gonna beat on that fuckin thing ? buy a new one for $10 bucks

[@garrettsgarbagegarage7970]

Michael O'Neill heck no just beat the shit out of it. it worked out fine

[@drummerdude0314]

Damn got mine for 9 lol

[@michaeloneill822]

lol thanks for the info

[@sandythomas5605]

crhmachine scam ripoff Carl Robert Hoffmeyer and Kimberly