Ford F150 Front Brake Caliper, Dual Piston Rebuild

[@jaycallis6047]

Excellent video! If you are having an issue with your calipers locking up or dragging, the problem is the Phenolic piston. Once it starts getting hot it swells therefore causing it to stick. This has been an issue with the 150/250/350 trucks for years. Ford knows about this and has refused to correct it and that their only solution is for you to replace the calipers. Replace them with steel pistons and your problems are solved.

[@hardlymovingpro]

Thanks for sharing!

[@bonzaifpv3015]

So do the new/rebuilt calipers come with steel or phenolic again?

[@slother93]

Be sure not to forget the wood block when using compressed air to push the pistons out. They’re lightweight and will go flying! Don’t ask how I know! Lol. Also, dial back your air pressure if you can to lower the force ejecting the piston. No need for 100 psi on those puppies.

[@hardlymovingpro]

Thanks for sharing!

[@brycemaggio6144]

Just found that out the hard way. Block of wood folks!

[@roberto9787]

I use a bicycle or hand pump to push them out slowly

[@roberto9787]

Did i see black Air Forces?

[@mick5740]

Do t you use brake grease instead of brake fluid ?? I thought fluid corrodes and it ain’t greasy. Thinking about rebuilding my 06 f150 calipers

[@hardlymovingpro]

Seals are designed to seal with brake fluid

[@gearjamin6839]

I would like to know the part number for the brake caliper pistons. Thanks

[@hardlymovingpro]

Check online with a Ford dealer.

[@toxicxshamrock1428]

Thank you so much for this video. It was exactly what I needed/wanted to see and no BS! Helped me out TREMENDOUSLY!!!!!!!

[@hardlymovingpro]

Glad it helped!

[@mikimiki195]

Great video to the point No BS intro crazy loud music 👍🏻👍🏻👍🏻

[@hardlymovingpro]

Glad you liked it!

[@johnbennett6887]

Where can I find the yellow seal adapter you used, or do you know the diameter so I can get the right size? Also does the piston compressor also work to depress the pistons so you can get the caliper off. Thanks, your video is great, keep them coming.

[@hardlymovingpro]

I provided a link in the the video's description. "Camshaft & Crankshaft Seal Installation Kit".

[@jjchino3961]

I have enjoyed your video presentations since the the first video, you remind me of my oldest brother now passed. Thank you.

[@hardlymovingpro]

Glad you like them and thanks for your support!

[@salvadorsepulveda6415]

Great instructional video again. You are always straight forward and to the point which is refreshing now days. Keep up the great work and your professionalism. Thank you and Blessings.

[@hardlymovingpro]

Thanks and appreciate your post!

[@gltwn]

Bravo on rebuilding the calipers. I've found it's really easy to rebuild them and a great way to save money. I use Toyota red rubber grease as specified in the factory manual on the seals and boots. I reuse the old pistons.

[@hardlymovingpro]

Thanks for sharing your info!

[@lenineder]

Fantastic video. It is helping me with the same job. Can I ask if you have the PN for the seals repair kit you used? I have ordered the seals repair kit from two different part stores and they always send the wrong one. Thanks in advance!

[@hardlymovingpro]

Recommend you go to rockauto.com to find the right seal replacement kit.

[@lenineder]

@@hardlymovingpro That was my first attempt with bad luck. Thank you!!

[@captango]

​@@leninederthere should be a number stamper on the caliper body, mine was 52 and 46 as I have dual,pistons. 🇬🇧

[@ask43242flight]

What is the name of the black air rubber adapter?

[@hardlymovingpro]

Rubber tip air nozzle.

[@kimquyluu6771]

Thank you share clip

[@hardlymovingpro]

You bet!

[@jinpark5324]

Learned a lot from your videos. 👍🏻

[@hardlymovingpro]

Glad it helped you out!

[@timdion7834]

This is well done Thank you

[@hardlymovingpro]

You bet!

[@Metalsman75]

Helluva great tutorial.

[@hardlymovingpro]

Glad it was helpful!

[@joro5827]

Great video bro

[@hardlymovingpro]

Thanks!

[@heribertocastillo3864]

Very good !!!

[@hardlymovingpro]

Thanks a lot!

[@lewisg8487]

Great video

[@hardlymovingpro]

Thanks!

[@marklance033]

Cool video

[@hardlymovingpro]

Thanks!