Thank you very much… I was going crazy because the first method with the hazard light didn’t work on my 2016 Lariat f150. Now this method really works
@perrygreen19615 ай бұрын
Thank you sooooo very much for this tutorial. I thought I was going crazy hitting that hazard button. Saved me $400 in replacement parts and installation from a "reputable" tire shop who couldn't figure it out.
@joseb93955 ай бұрын
I had the exact issue and thanks to your video I was able to get my new sensor to get recognized by the BCM. Very good tutorial, just hard to get the right count when I was switching it on and off, took me a few tries before it went into the reset mode.
@wbgarywp5 ай бұрын
Yeah I should have done a better job of explaining the exact count
@tomburns89013 күн бұрын
I have one sensor that reads blank I’m assuming it’s bad. So if I have a new one put in your saying this intention on off brake method is how I get the new tpms programmed to read the pressure and won’t have to plug into the computer/ECU to program it? Is that correct?
@wbgarywp13 күн бұрын
@@tomburns890 yep
@tomburns89013 күн бұрын
@@wbgarywpwow great, I didn’t have my tire guy install it because he said it was a $120 computer program fee. Thank you
@tomburns89013 күн бұрын
@@wbgarywpand just to clarify it’s on/off 5 times then brake then off/on 6 times ending on On then brake and that will do it?
@wbgarywp13 күн бұрын
@tomburns890 I bought a cheaper programming tool and it didn't work. But this manual method worked after I put a new sensor in
@tomburns89013 күн бұрын
@@wbgarywpand just to confirm the sequence can u read my previous message and confirm. Thx
@leethompson9797Ай бұрын
Hey MacGyver I installed a new tire pressure sensor exactly like the old one but I can't get it to wake up. Any tips I have a tool that currently wakes up the other sensors that I did not change
@wbgarywpАй бұрын
@@leethompson9797 you have to learn the new sensor. The standard procedure only resets the locations after a tire rotation. Follow this video to put it in learning mode. And start letting air out
@leethompson9797Ай бұрын
@@wbgarywpthank you so much for the reply. Even still after programming it just like the video it still won't detect it. I'm thinking maybe the sensor has to wake up after driving. It looks like this motorcraft sensor was packaged in 2017. 😊😊 So far I tried some Amazon universal sensors and when I couldn't program these using the method in the video I bought motorcraft. Any insight would be greatly appreciated
@wbgarywpАй бұрын
@@leethompson9797 it may have a dead battery. 7 years is a lot of shelf life. It might help to do a short drive and then try programming again
@leethompson9797Ай бұрын
That did it. Thank you!
@wbgarywpАй бұрын
@@leethompson9797 awesome 💪
@DJWalsh-11 ай бұрын
This worked perfectly for my 2017 f250. Put a second sensor in me tire after dealing with 1 tire not showing up. First time in a couple years without a single dash light on. Thanks man!
@wbgarywp11 ай бұрын
Perfect
@MartyMoss-sf9jq Жыл бұрын
This solved my problem! Thanks so very much
@wbgarywp11 ай бұрын
Anytime
@RustyOutdoors10110 ай бұрын
I have a 2011 ford f-150 and this truck doesn’t have a button to start. Do you know of a combination that would relearn a new sensor for this old truck? Thanks so much
@wbgarywp10 ай бұрын
Ignition off press and release brake pedal. Ignition on, off, on, off, on. Press and release brake pedal. Ignition on, off, on, off, on. Horn should sound. Leave that ignition on and program your sensors
@davedahl69709 ай бұрын
Worked for me, too, exact same problem. Too bad this was so hard to find.
@thefiXfiles9 ай бұрын
@@wbgarywp dude huge thanks for this response. My 2016 F-150 doesn't have the push button start so I had to use this method. I was about to give up until I came across this. I'm making a how-to video for replacing the TPMS sensors. I'll give you a shout out and credit for this method. Thanks again, and subscribed.
@wbgarywp9 ай бұрын
@@thefiXfiles glad to help. Much appreciated
@douglasstovall239510 ай бұрын
Think this will work on 2016 F-150 Lariat?
@wbgarywp10 ай бұрын
Yes
@douglasstovall239510 ай бұрын
do you just press brake and let off? My truck has a push button, not a key to start.
@wbgarywp10 ай бұрын
@@douglasstovall2395 yes my truck in the video is also push button
@douglasstovall239510 ай бұрын
Thanks for your prompt replies. Will try this tomorrow and let you know@@wbgarywp
@douglasstovall239510 ай бұрын
On my 2016 F-150 Lariat this didn't work. However, the following did work and recognized the single new sensor and the other 3 existing ones: 1. With ignition OFF, press and release the brake pedal. 2. Turn the ignition from OFF to Run 3 times, ending in the Run Position. 3. Press and release the brake pedal. 4. Position the ignition to OFF position. 5. Turn the ignition from OFF to Run 3 times, ending in the Run position. The horn will sound if you did it right, then follow the instructions in the message center. Train the tires LF/RF/RR/LR with the TPMS tool. The horn will sound after each tire and, after the last beep, the message center will say training complete. Hopefully this will be of use for others.
@chaone4703 Жыл бұрын
I am having the same issue with my left rear sensor. I replaced it and attempted to reset but the new sensor doesn’t read. I tried to relearn sensors and my other sensors will not relearn but they will reset. Wtf!?! Any suggestions?
@wbgarywp Жыл бұрын
Check to make sure the new sensors the correct MHz
@chaone4703 Жыл бұрын
@@wbgarywp The new sensor is a PDQ TPMS 315MHZ Tire Pressure Sensor.
@wbgarywp Жыл бұрын
@@chaone4703 email me your info I'll see if I can help out
@chaone47039 ай бұрын
I apologize for not posting an update. It worked! Just as you described. I purchased the $11 ford tool and boy was it worth it. Deflating the tire was killing me! Thank you 🙏🏽
@byronortega3447 ай бұрын
Mind sharing which tool is it? I’m having the same exact issue. Replaced all 4 sensors 315 MHz. Followed all procedures and still not responding
@4by4taco12 Жыл бұрын
What if you have a key and not push to start?
@wbgarywp Жыл бұрын
Ignition off press the brake pedal. Release. Ignition on 3x. Press brake pedal. Release. Ignition on 3x horn will sound
@javiermiranda1751 Жыл бұрын
@@wbgarywp✅
@jport789 Жыл бұрын
This worked. However I didnt use the air realsing I used the tranin toll.
@timbo79887 ай бұрын
Trick didn’t work for 2023 ford
@wbgarywp7 ай бұрын
2023 should still be under warranty. 21 and up is a redesign.
@fernandotrejo5290 Жыл бұрын
So it's ON-OFF ON-OFF ON-OFF ON-OFF ON-OFF -BRAKE- ON-OFF ON-OFF ON-OFF ON-OFF ON-OFF ON, and it I'll honk, Right?