Ford Falcon Guard Replacement

[@gerrycampbell3432]

Very helpful video. I removed the wheel as car was already on Jack, then only had to remove the front 150mm of the plastic side skirt to gain access to the 2 x 10mm head bolts holding the bottom of the wheel guard. Everything else was straightforward. All bolts were 10mm head

[@mickrise]

I'm doing this next week on an FG Turbo sedan. It's like studying for a test. Cheers.

[@tickld93]

I took the whole wheel guard off like a clown before I found this video. Thanks for your time!

[@scunner900]

Thanks for putting the effort in mate.

[@eddies2599]

Hey mate, they are 6mm bolts with a 10mm head. That means you use a 10mm spanner on those bolts.

[@doesitmatter9451]

Great video mate, thanks for your time 👍

[@daleoldfield7961]

Great video mate helped me out heaps even though I have a BF falcon

[@Dave-ru3tt]

Thanks mate- very helpful 👍

[@byrondixon4648]

Good to see people are still watching my Ute be fixed 🙂

[@cmagyar7157]

Cheers mate. Very useful

[@tonypegler9080]

You didn't cover removing the bolt right next to the bonnet hinge - how did you get that out - I can't get a socket onto it.

[@byrondixon4648]

Yes that one is difficult. I think Ideally the wiper arms come off and the whole plastic cover comes off. I just lifted the plastic enough to get access to it, but it never went back on really well. Hopefully you do it better than me. Good luck.

[@AH-ky7xb]

Hi, would it be the same procedure for a 2006 Ford Territory SY?

[@byrondixon4648]

I expect it would be very similar.

[@Drez_Mitsy]

Lets give it a crack.

[@savatorouno3246]

How did you get the Christmas tree clips off?

[@byrondixon4648]

Christmas tree clips usually come out with needle nose pliers or side cutters (don't cut them, just get under the head) And or a flat blade screw driver. Good luck.

[@Gregorygrantley]

Less work than gutter guard

[@shenghan9385]

Lol. And the second hand parts for Falcon are always reasonable priced at your neighbourhood wreckers too.

[@xCookiee]

Budget Russel coight

[@byrondixon4648]

Russell would never have finished the job!

[@DJAloneAtNight]

per....fect!

[@bluballs9945]

Cheers for nothing thumbs down

[@stevethedonful]

W ⚓️