I’ve been a Ford man my entire life, and I’ve only seen one of those flatheaded in-line sixes… and I’ll take the ‘48 F-1, the 1st generation F series which debuted the year of my birth. Thank you my friend for videos you produce of the esoterica of the automotive world. 👍
@What.its.like.5 ай бұрын
Thank you so much for the positive vibes.. I personally love covering cars and engines that don’t get the time of day to try and keep the information out there for anyone who wants it.. happy you dig this episode =) great choice
@johnrichard66393 ай бұрын
There was a flatty 6 in my '51 2dr sdn! Ran great!! Bullet proof! Plenty of torque & HP. GREAT ENGIN!
@What.its.like.3 ай бұрын
Awesome I personally like the six over the eight the six could make about the same power
@lanedexter63035 ай бұрын
Good video. I remember the flathead six in our 1948 Ford F-6. Dad picked it up used, we removed a sheet metal 18 ft. “shop” (support truck for logging company) which turned out to have been built by Boeing’s Renton plant. Then we built a 16 ft. bed with stock racks. Four speed tranny and vacuum two speed axle. At one point, Dad bought an old ‘52 Mercury, thinking to swap in the flathead V8, but it turned out to be cracked so we stuck with the six until replacing the truck with a ‘48 Dodge one ton, then a ‘56 International S-164 which had four speed and a nicer electric two speed axle (I still have that truck). Sure would like a nice ‘48 Ford pickup.
@What.its.like.5 ай бұрын
Awesome story thank you so much for sharing those memories =)
@michaelabernathy70135 ай бұрын
Thank you for featuring the 'other' flathead Ford engine. My Dad and Grandad claimed it was a better engine than the V-8. Illustrated auto ads were amazing. Truly a lost Art form. Take care Jay!
@What.its.like.5 ай бұрын
Thank you for digging this episode this one is a lost and mostly forgotten engine =) I would love to cover all the engines that never get talked about.. only issue is information is sometimes hard to find..
@MS-ig7ku5 ай бұрын
Inline sixes are in someways better than vee eights.
@lynnmcculloch-m4h5 ай бұрын
❤❤❤❤❤ great video
@johnrichard66393 ай бұрын
What sounds cool , inline flat 6, duals, glass Packs, split manifold, no equalizer cross pipe!! Flat head FORDS FOREVER👍😎
@What.its.like.3 ай бұрын
=)
@josephgaviota5 ай бұрын
I worked at my dad's auto garage summers from say, 1965-1975 ... and NEVER saw a Ford flathead six! I saw lots of Chrysler/Plymouth flathead sixes, Rambler flathead sixes, even Ford flathead V-8s, but _never_ a flathead six. If you asked me 15 minutes ago if Ford made a flathead six, I would have said (incorrectly) "no."
@What.its.like.5 ай бұрын
This is a lost and mostly forgotten engine over shadowed by the V8.. but stock to stock this is the better engine.. I got to drive a 52 ford with 226 six it had great power but doesn’t rev high he made it a point to tell me that =) one of the hardest things I ever drove non sycrho transmission had to double clutch and rev match and go the correct speed to get it to shift he made it look so easy when it was my turn I go he just laughed I never drove anything like that before or after like that and it was a 52
@josephgaviota5 ай бұрын
@@What.its.like. To this day I'm driving a manual transmission, but I've never driven an unsynchronized transmission. Even though I think I'm "good" at driving a stick, I'm sure it'd take a LOT of practice to get to where shifting w/o synchros would become anything close to, um, "automatic."
@What.its.like.5 ай бұрын
Some of them are easier than others. For instance, I drove a 1946 international KB six with a five speed transmission that was non-synchro, and it was easy to do as long as you double clutched it. It was more forgiving than the transmission, the transmission, the plants and stars had to be perfectly for you to get it to engage proper. The window wasn’t nearly as big as it was on the international transmission, the five speed international was very interesting to say the least. The shift pattern was and it only went 55 miles an hour whereas his Ford would go a little faster than that so they were further spread apart.
@n.mcneil40665 ай бұрын
Ford never built the flathead sixes in Canada but a few did sneak across the border. I saw about 4 vehicles equipped with them. All lighter vehicles in Canada used the 239 V8 while medium duty trucks used the 255 Mercury engine or the 337 Lincoln engine. I always thought Ford wasted their time building sixes but that 300 was a good one.
@jimstrict-9982 ай бұрын
@@What.its.like.I'm pretty sure the 52 Ford was the first year for the 215 OHV Six. It was bored to 223 after several years, lasting thru the 1964 model-year in trucks and full-size cars.
@thralldumehammerАй бұрын
Love the 49 Ford
@josephgaviota5 ай бұрын
WYR #1, the '46 Wagon ... makes me want to watch "Dark Passage," so I can see Lauren Bacall driving her '46 Woody Wagon.
@albertcarello6195 ай бұрын
@josephgaviota: Lauren Becall a really great actress. I mean Lauren Bacall excuse my incorrect spelling.
@fidobite37985 ай бұрын
1st group: The '41 P'up is just a beautiful piece of styling 2nd group: That '48 P'up is the one, primarily because my best friend in h.s. drove a restored version 3 spd manual in gorgeous ochre yellow!
@toddknox6855 ай бұрын
Horse power knocking on the door of the old Flathead. In fact, it was probably a better engine than the V8 It would have run forever, and it probably still is somewhere.
@jamesbosworth41915 ай бұрын
The only thing wrong with it, from that era's perspective, is that you couldn't hot rod it - you would break the crankshaft in two. You couldn't keep it at 4500 RPM. It had a frequency problem at that speed, a speed that it couldn't rev to in stock condition.
@charlesdalton9855 ай бұрын
WYR: 1949 Ford and 1948 Ford. Heck, the two of those might be all you'd need back then. That 6 making 212 ft/lbs of torque barely off idle is a real stump puller. Thanks as always ~ Chuck
@jamesbosworth41915 ай бұрын
With overdrive they would be perfectly adequate even today.
@What.its.like.5 ай бұрын
I was thinking the same thing =) a pretty good over looked over shadowed engine
@tigre77395 ай бұрын
I'd pick the '46 Woody, and the 51, although I really like the '42 also, but the '51 would be my first choice of all of them. The advertisements were so great!😎🤟
@What.its.like.5 ай бұрын
Totally agree I hope to have a studio one day I’ll frame all the stuff that has been given to me I do all these episodes at the kitchen table lol Great choices I didn’t make that one easy lol
@jeffreyfwagner5 ай бұрын
The 254 cid motor was probably a really good everyday driver. Peak torque at 1200 rpm makes for a great around town experience. No need to rev up the engine to get results.
@jamesbosworth41915 ай бұрын
You weren't supposed to be able to get the 254 6 cyl in passenger cars, but that being said, my uncle had a 53 Ford with, he said, a flathead 6 when I was a little kid. I wonder if he put a 254 in it, as the new for 52 Ford overhead 6 was only 215 cubic inches.
@What.its.like.5 ай бұрын
It was really hard to find information on the 254. I wasn’t sure if they offered it in passenger cars because by then they had the overhead valve engine which was considered superior to that even though that one had more cubic inch displacement.
@brantardrey73602 ай бұрын
@@What.its.like.truck?....
@61rampy655 ай бұрын
WYR= 49 Ford and the 42. I'd take the 49 because it was the car I came home from the hospital in when I was born. The 42 would be a very rare car, as production stopped after WW2 started. That 61(?) Rambler Ambassador had a unique grille/nose. I remember seeing them very occasionally when they were newish, and they were quite distinctive, compared with the Rambler Classic. One of those with a 327 V8 would make a pretty cool and fairly fast car.
@What.its.like.5 ай бұрын
Great choices thank you so much for those memories Totally agree the 42 is rare never saw one I want to eventually do that ambassador really look for a wagon one year only super rare I’ve also been looking for a 57 Rambler rebel I would really love the feature that this year I wanted to feature it last year, but I couldn’t find one.
@mikeholland10315 ай бұрын
You mean after the US joined the war. It had been going on for a cpl of years by 41. 42's only produced from Sept to Dec that year so ya, very rare.
@johnboydTx5 ай бұрын
51 Ford first All others 👍 Great Episode Happy Motoring ✌️🤠
@What.its.like.5 ай бұрын
Hahaha nice choices =)
@toddknox6855 ай бұрын
"49 Ford for me. Milestone car for sure. And the coupe for sure. I'd drive it right now.
@What.its.like.5 ай бұрын
Awesome choice =)
@danielminton808410 күн бұрын
A note from my grandfather who works with these flathead 6’s all the time: “I watched the video. Pretty good except I noted an error. I did not make a comment about it but he was incorrect about the distributor location on the 1941 to 1947 engines. The distributor was in the front of the engine.”
@acersalman82585 ай бұрын
Beautiful good machine useful ❤❤❤❤❤❤❤
@jamesbosworth41915 ай бұрын
This Ford 6 was a good engine when used as intended, but the hot rod crowd tried to soup it up and found a problem - the crankshaft had a frequency problem at about 4500 RPM that would break it in two. Stock, it couldn't rev that high, so it wasn't a problem for regular passenger car light truck duty, but you couldn't use it as a hot rod engine. Also, the 52 Ford overhead 6 came in at 215 cubes and 101 horsepower. The 223 version with 115 horsepower debuted for 1954.
@What.its.like.5 ай бұрын
Great information and insight thank you so much for sharing =)
@josephgaviota5 ай бұрын
I'm always amazed at how information the audience has. Very cool.
@What.its.like.5 ай бұрын
Love this community =) they can provide so much more information because they were around these machines. I’ve done this long enough to know that not all the information that you find out there is 100% factual. I’ve had lots of bad information. For example, the Leeland Lincoln engine every source that I went to on the Internet, said that the first two engines have three main bearings. The last one has five finding an old shop service manual after doing the whole episode it brought the light that all of them have five main bearings , there’s a lot of misinformation out there and it just sucks for someone like me to try to decipher. What is and what is fiction.. the other thing that really sucks a lot of sources like to round numbers why they can’t give the actual numbers is beyond me
@P_RO_5 ай бұрын
A fella had one of these in a boat and wanted it to go faster, so he designed and made a camshaft which would go past the deadly RPM so quickly that the crank didn't develop the resonance which broke them. Soon Ford car owners were asking him to make that cam for them. His name? Ed Iskendarian (Isky Cams) 😎
@jamesbosworth41915 ай бұрын
@@What.its.like. You are absolutely correct. NEVER rely on the Internet, rely on PRINTED MATERIAL, like shop manuals, that were written when the machine was new. Computer nerds don't know about much more than computers and cell phones.
@altaccaltacc76525 ай бұрын
I love flathead engines :)
@What.its.like.5 ай бұрын
Awesome personally I’d take this over the ford flathead v8
@altaccaltacc76525 ай бұрын
@@What.its.like. yeah I think making a turbo set up will be easier too
@JefferyHall-ct2tr5 ай бұрын
Hi Jay! You know I always LOVE these engine episodes! It's really a shame how the excellent Ford Flathead Six is overshadowed by the Flatty V-8. The WYR's are very hard this time, since they are all cool!! #1 would be the 1949 and #2 The 1941. Automobile advertising has the BEST artwork of its time! Glad you received all those COOL brochures!
@What.its.like.5 ай бұрын
I’m so happy to get those ads I love classic ads just the way they did them American realism in watercolor happy you dig this episode great choices
@johnrebus16412 ай бұрын
Some years ago I read that this engine was created to appease the US Army, who admitted in the late 30's that they preferred Dodge trucks over Ford's & Chevrolet's because the Chrysler engines were superior. The Ford V8 was considered unreliable due to overheating & too difficult for field service due to its nasty hidden, non-adjustable valvetrain. The Chevy lacked proper full pressure lubrication. I'm not sure if this is true but it would explain why Henry allowed his boys to design a proper truck engine.
@hcombs01045 ай бұрын
For WYR, it's the '41 Ford (especially if it's a Woodie Wagon, and it's a tie between the '42 and the '51 Ford...the '42 wiuld be rare and the '51 was the best of the Shoebox Fords. I liked the advertisements at the tail end of the video. My late mother drove two of those cars...the '61 Pontiac, and the '64 Rambler.
@What.its.like.5 ай бұрын
Sometimes people will send me things I love sharing it with you guys one day I would love to have a studio and hang everything that I get so you guys can see it too.. totally agree with you. Those advertisement pieces were stellar. Choices were hard, especially if you were a Ford enthusiast, but great choices nonetheless =) happy you dig the episode
@geebs765 ай бұрын
I enjoyed the episode. I'm guessing a lot of these were in military vehicles in WWII. I'd choose the 1941 Pickup and the 1948 Pickup.
@What.its.like.5 ай бұрын
I would think the same used in ford jeeps perhaps I’m not that up on WWII or vehicles of war but sweet choices happy you dig this episode =)
@geebs765 ай бұрын
@@What.its.like. As I understand it the Government made Ford produce the Willys Go Devil engine for their jeeps. I looked it up and the 226 was in staff cars and the GTB which was a 1-1/2 ton military 4x4.
@brantardrey73605 ай бұрын
Here we go I had to watch this to straighten it out all these years I kept saying that the Flathead 6 was a 227? But I did this from memory I've been mechanic for 55 years my cousin had a 50 coffin nose in 1970 in Portland he bought it for $100 it had 90 horsepower it ran like s*** because I think it had a valve going or a fouling plug or whatever he complained like crazy for $100 I did not think that the engine was the same as a Kaiser 226 I didn't want to share the same thing but I'm doing this from memory and I have a lot of books but I didn't have one on that anymore that show the old engines so now we find out it's a 226 not a 227 thank you very much
@What.its.like.5 ай бұрын
I think that one could be called either because I don’t think it was a solid number. I think it was like 226 point something so some people might round at the 227.
@adamv2425 ай бұрын
I'll take the Ford. And the Ford.
@What.its.like.5 ай бұрын
Haha =)
@bensonsspeedshop11915 ай бұрын
Too Hard to chose, Sir! They All have their merits!
@What.its.like.5 ай бұрын
Haha I know right it wasn’t easy this go around
@8176morgan5 ай бұрын
I must confess that I did not know that Ford ever made a flathead 6 during those years, I was only aware of their somewhat famous flathead V-8. The other two major car makers low priced entries, namely Chevrolet and Plymouth, didn't even have a V-8 engine until 1955, the year that all American cars being sold finally came equipped with them under the hood. So that is my automotive lesson for the week. Anyways, in regards to WYR I will definitely take that beautiful '46 Ford Woody for my first choice, and then for my second one it would have to be the '42 Ford Tudor sedan. You don't see too many of those around due it being an abbreviated year for the car industry.
@What.its.like.5 ай бұрын
I love covering the lost and mostly forgotten.. sweet choices =)
@DSP19685 ай бұрын
Another great video, Jay. I really enjoy your engine histories/summaries. And I'll take the '46 and the '42 Fords.
@What.its.like.5 ай бұрын
Thank you I’m happy you dig this episode =) I love doing them especially the engines that don’t get the coverage Great choices
@P_RO_5 ай бұрын
Look up the history of Isky cams and you'll find that he started with this engine, succeeding in making it fast when no one else could. It's easier and cheaper to cast and machine an inline 6 than a V-8. Ford was probably thinking about the many people wanting high fuel economy who would not buy a V-8 too. Kind of seems strange that they didn't try to go for an OHV configuration from the start which would have gotten more sales in every market. WYR I like the 'shoebox' Fords, so it's a 49 for me. And I love the early F-1's too so it's the 48, even though the 42 is super-rare and you'd have the only one around. Back around 1988 I watched a guy graft a late 60's or early 70's Pontiac front frame section onto his 48 F-1, an almost perfect fit to frame and the body too. IIRC he had to fab the front body mounts and bumper brackets, but it was the slickest resto-rod upgrade I've ever seen done; everything looked factory.
@What.its.like.5 ай бұрын
Awesome thank you so much for sharing that I’m hoping next week the engine episode is going to be on an engine manufacturer. I’ve been trying to do Kohler, but their history is very complicated in the sense that they were in business to make anything that there was a market for, and how much of the story do you? Do you tell the whole story or do you just tell the part of it because they’ve offered a vast array of different products especially in the beginning.. I would love to cover Wisconsin, Continental Briggs and Stratton. I also thought about doing early Harley Davidson the twins it’s just I don’t know where the draw the line do you talk about a specific type of engine or do you talk about all of them Indian four
@P_RO_5 ай бұрын
@@What.its.like. You can do an overview of engine manufacturers, but to cover every (or even most) models would take hours and days. Maybe do the overview, then cover some of the oddest applications their engines were used for. That should be an interesting and popular approach.
@Frank-sf1wh5 ай бұрын
I would be happy with any of the choices but I prefer the ‘41 in the first set, and the ‘42 in the second. I had a ‘53 half ton with a flat V-8 in the late 70s great work truck.
@What.its.like.5 ай бұрын
Awesome definitely didn’t make the would you rather easy today
@mattconnors33327 күн бұрын
What Bellhousing connects a 1949 H series to a 1946 3 speed side shifter? Thank you
@tonychavez2083Ай бұрын
41’ Ford with 21 stud flathead V8
@scottbourret11905 ай бұрын
My 51 F1 has the flathead six in it. Runs like a top, and is still strong for what it is. Dread the day I need to find parts. When that time comes I may just convert it over to a 300.
@What.its.like.5 ай бұрын
Awesome question do you have the synchronized transmission behind it or the crash box non-synchronized unit I will say that is the hardest transmission that I’ve ever had to privilege of driving
@jimstrict-9982 ай бұрын
Use a 223 or 240 Six instead. They'll work better with the higher-# rear-ratio you probably have.
@Rorer714.5 ай бұрын
You could change a head gasket @ a red light.
@What.its.like.5 ай бұрын
Back when things were simple
@thomastevelde8547Ай бұрын
Looking for information on a 6 cylinder flathead in a 1959 Fitchburg mfg woodchiper
@marcelgaud5 ай бұрын
Jay, no one got the song last night, because no one "CAN" get it you're getting so "TIGHT" on how much, and how "LOUD" you put it..... The other day you had GREG KHIN, Jeopardy....> Dude, I was Young, went to see him in CONCERT, back in '82, have all of his tapes, and I couldn't have got that, it was so LOW, and so MINUTE........I wished I could've heard yesterdays, I'm a big "BOBBY FAN" too, KNOW all of his songs.............I think I'd have recognized it, however you put it so "DIM" and so "SHORT" it's really impossible, and pretty well "frustrating" for me to get that far in your shows......... I always love your content. Sincerely, Marcel , in Yuma, Az
@marcelgaud5 ай бұрын
@@PS-js9oh ahahahhahhaha
@What.its.like.5 ай бұрын
I have to make name that tune, hard a lot of people use software to get the names so I’m not just trying to stump people anymore. I’m trying to stump software which is really hard to stump software but I’ve done it a couple times the song in this video was a Bob Seger song I might sing it at the end of tonight‘s episode. I was going to sing it at the end of yesterday‘s episode, but I didn’t. The main line is the name of the song. I was born way too late. They don’t make music like they used to make music. There are a few good artists now but a very few and far between most people don’t even sing anymore most of its autotune. The only reason Taylor Swift is as big as she is is because there are way more people on the planet and there was back then … I’m gonna leave it at that. I’m pretty sure that my audience isn’t the Swifty crowd..
@What.its.like.5 ай бұрын
Hahaha I didn’t get tonight’s episode done and instead of scrambling to get it done for 11 o’clock. I’m just gonna wait until tomorrow 1926 wills st Claire
@marcelgaud5 ай бұрын
@@What.its.like. Well, that's alright, relax, have a beer, and figure out how to make it simpler for us NORMAL people to get the music. I've not heard of anything like what you've said before, that there is some software that gets people the answer so quickly
@davidmendoza878019 күн бұрын
Tengo un motor flathead 6 six de una Ford F1 1948,,mi pregunta es, ¿que presión de aceite maneja? ya que en el tacómetro siempre me marca entre 7 y 10 lbs, ¿es ese el rango normal?
@dougabbott82615 ай бұрын
wyr 1941 Ford pick up wyr 1951 Woody Flat head 6 simple and dependable.Thx Jay
@What.its.like.5 ай бұрын
Awesome choices and your welcome happy you dig this one =)
@williamlindner39845 ай бұрын
Never knew Ford made a 226 .. Kaiser Fraser and Willy's Jeep ran a Continental 226 which was a great smooth running engine.. Lots of torque, but don't over rev it .
@scottymoondogjakubin47665 ай бұрын
Im more in favor with the 49 ford ! I actually helped a ww2 vet getting the car out behind 10 other cars ! Was solid and all original !
@What.its.like.5 ай бұрын
Great story awesome choice
@jamesbosworth41915 ай бұрын
I would take the 42 2 door post. Would enjoy correcting people who would try to say that it is a customized 46.
@What.its.like.5 ай бұрын
Awesome choices =)
@robarison22425 ай бұрын
The 226 is the 6 cylinder that funk was putting in ford 9n, 2n, and 8n tractors.
@draggonsgate5 ай бұрын
'46 Woody! '51 Wagon! Is there a reason everyone went with overhead valves instead of staying with flatheads? I've never worked on one, but it seems that the flatheads are a much more easier engine to work on. That could also be because it doesn't have all the modern crap attached too, I guess. It just looks less complicated. I remember, all too well, changing the plugs on my Grand Marquis' 460... it was a bear! Woulda been so easy to have the plugs right up top!
@What.its.like.5 ай бұрын
Ohv was the next big thing they say they are the more efficient design but I think that flathead should make a comeback as a turbo charged unit some got great gas mileage 32 mpg hwy in a 51 studebaker champion
@draggonsgate5 ай бұрын
@@What.its.like. Problem is, it'll be shoved into a crossover or SUV... They just announced Chevy is cancelling the Malibu. I do NOT understand why American car companies refuse to keep making sedans. Every single import has sedans/coupes in their model line-up, along with crossovers and SUV's. The last gen Taurus was an awesome car (albeit a bit small for my tastes) but it was reliable, looked great and you could get AWD. But nope. EVERY time I take Luigi in for servicing/repairs they start on me about "upgrading"... sorry, going from a Grand Marquis to an Explorer or Expedition is NOT an upgrade for me. It's going from a solid 4 door sedan to a damn truck. And now, GM follows suit... Stupid stupid stupid. Just forcing folks into Hondas, Toyotas, Volvos, Kias, Hyundais, etc... edit: oooops, sorry about the rant... got a little off the subject. Sorry, J....
@What.its.like.5 ай бұрын
I totally agree there are a few nice new cars but to me the best cars have already been made it’s just finding them
@jimjoe99458 күн бұрын
Flatheads limited the bore and valve size. No room to go bigger. Overhead valve engines had more efficient chambers and you can get higher valve lift.
@Sagiterrian775 ай бұрын
Our ‘51 6 would start on the coldest morning when many others wouldn’t.
@What.its.like.5 ай бұрын
I’ve heard they were a good engine
@jamesbosworth41915 ай бұрын
I would want the 46 wagon, but with no place to put it, (you wouldn't want to leave a woody wagon out on the street all the time), I would have to take the 49 coupe.
@What.its.like.5 ай бұрын
Yeah most definitely you’d have to have a climate controlled environment to have a wood bodied car
@user-ij3op9dw3u5 ай бұрын
,Gleaner combines used flathead Ford sixes too
@What.its.like.5 ай бұрын
Awesome information. Thank you so much for sharing that.
@mschiffel15 ай бұрын
1949 Ford Coupe, and 1951 Ford Woody
@What.its.like.5 ай бұрын
Awesome choices
@toddknox6855 ай бұрын
Hard to pass up the truck. All 3 if I had the money.
@What.its.like.5 ай бұрын
Yeah hahaha I didn’t make that one easy if your a ford fan
@kylekenan23212 ай бұрын
Got a 1950 F6 with the 254
@What.its.like.2 ай бұрын
Sweet =)
@MS-ig7ku5 ай бұрын
In someways the inline six is better than the vee eight.
@georgejones-nz1qg5 ай бұрын
When the new flathead six was dynoed, it produced more power than the 239 v8. So Ford didn't publish HP numbers for the 6.
@What.its.like.5 ай бұрын
I believe it..
@mikeholland10315 ай бұрын
I didnt know about these and heard henry ford didnt like 6's either.
@What.its.like.5 ай бұрын
Henry Ford had a six cylinder that powered the model K one day going to do an episode on that in 1906 I think that whole car almost cost him…. or did cost him his original company and I think that’s why Henry Ford kind of held a grudge against six cylinder cars
@danielminton808412 күн бұрын
where can I find performance parts for mine
@What.its.like.12 күн бұрын
Google search The parts you are looking for Ebay
@dondesnoo17715 ай бұрын
They were pretty snappy bunrt rubber low gearing friend had a 47 drop clutched said I'll show you more burn you ever saw 💥 bang fordys junkyard it's new home 25$ 😂
@What.its.like.5 ай бұрын
Crazy story a friend of mine has a 52 Ford with a 226 in it but non-synchro transmission. It was the hardest thing I’ve ever driven. He made it look so easy you had to rev speed match and double clutch for it to engage. I have driven vehicles where you have to double clutch no big deal but you have to do all three of those and it has to the moon in the stars have to be aligned perfectly for that transmission to shift. lol it looks so easy when it was my turn. He laughed a lot.
@dondesnoo17715 ай бұрын
@@What.its.like. jay Leno on his rides does a griind now and then so your not alone on that one ps the trans exploded reminds the video kids chained the rear on police car (am grafitti ? Thanx for your reply 😍
@JamesAllmond5 ай бұрын
41 Ford Truck 42 Ford
@What.its.like.5 ай бұрын
Awesome choices
@bparksiii61715 ай бұрын
First 1949 Ford second 1948 Ford F3 1 ton pickup.
@What.its.like.5 ай бұрын
Sweet choices
@dennislettich40355 ай бұрын
They're call "brochures"
@What.its.like.5 ай бұрын
Yes.. =)
@MikeMoskin5 ай бұрын
WYR - the '41 and '51 Fords.
@What.its.like.5 ай бұрын
Sweet choices =)
@andreamills58525 ай бұрын
All of them ,
@What.its.like.5 ай бұрын
Awsome
@ColtonRMagby5 ай бұрын
WYR: All of them.
@What.its.like.5 ай бұрын
Awesome =)
@goldenboy55005 ай бұрын
1951 ford woodie
@What.its.like.5 ай бұрын
Sweet choice
@bobmccurdy88815 ай бұрын
46 - 42
@What.its.like.5 ай бұрын
Sweet choices =)
@buildingracingvideos47145 ай бұрын
I would take a flathead 6 over the flat v8. Seems like it would handle added power better.
@What.its.like.5 ай бұрын
I totally agree =)
@jamesbosworth41915 ай бұрын
Actually, no. If you hopped it up, you would probably break the crankshaft, as it had a frequency problem at 4500 RPM. Stock, it didn't rev that high, but souped up, it could.
@What.its.like.5 ай бұрын
But stock to stock it was the better option brine didn’t have the cooling issues the flathead v8 had.. also I’ve heard it’s possible to build a flathead v8 but costs a fortune to get a lot of power out of one
@jamesbosworth41915 ай бұрын
@@What.its.like. I stated that stock, there was nothing wrong with this engine, and no, it didn't cost a fortune to get a lot of power out of the flathead Ford V8, as there was a vast amount of speed parts out there, just like was available for the Small Block Chevy in later years.
@What.its.like.5 ай бұрын
@@jamesbosworth4191 great information =)
@deanstevenson65275 ай бұрын
🥝✔️
@MS-ig7ku5 ай бұрын
Chevy and Buick never made flatheads.
@What.its.like.5 ай бұрын
Chevy made an overhead valve 4 Marquette had a flathead 6
@MS-ig7ku5 ай бұрын
@@What.its.like. One should also remember Chevy made an OHV V-8 for the 1918 model year, it was in someways similar to the 1955 engine.