Thank you for this simple to follow video,you explained very well how to replace the sensor and will definitely have a go myself after seeing how it’s done so thanks again
@Martysworkshop7 ай бұрын
Thank you for your feedback, I always appreciate the support of my channel.
@saqibsandhu1883 Жыл бұрын
It was very easy and straightforward video. Really appreciate for sharing your knowledge. Thank you
@Martysworkshop Жыл бұрын
Thank you for your feedback.
@kierakelly51 Жыл бұрын
Going to try! I’ve had these lights on for months. I was ready to give her up but this gives me hope! Thank you! 🎉😅
@Martysworkshop Жыл бұрын
Thank you for your feedback back, I'm glad my videos could help
@burger_man. Жыл бұрын
Brilliant video Marty!
@Martysworkshop Жыл бұрын
Cheers and thank you for your support
@posniknelb611422 күн бұрын
Hi mate. Do you know if it's the same procedure on the mk2 focus. I can't find anything on the mk2 replacement?
@Martysworkshop22 күн бұрын
It shuld be the same, or very similar
@posniknelb611422 күн бұрын
@@Martysworkshop Thanks mate. Will it have the window on top of hub, so i can see what im doing? It looks a tight squeeze ?
@37rowan6 ай бұрын
Thanks for that my car fix 👍🏻just have a question my Front brakes are my a howling sound after hard Breaking and then taking off I hear the noise again have ya ever have that problem?
@Martysworkshop6 ай бұрын
It could be the pads sticking in the carrier, I would take them apart and cheak it is all free
@37rowan6 ай бұрын
@@Martysworkshop thx will give it a go 👍🏻
@dt16074 ай бұрын
I have the same issue. Also message for Hill start assist and active city stop. Do you think they are all connected? ie same sensor fault. Thanks
@Martysworkshop3 ай бұрын
Yes all them systems are controlled by the abs
@jrewillis2 ай бұрын
You need a specific sensor that supports the park assist / hill assist. Best to remove the sensor and check the parts number on the one you have. There are multiple versions. You Must Replace like for like.
@benniethai78293 ай бұрын
Very useful video. 🙏🏽
@Martysworkshop3 ай бұрын
Thank you for watching
@Lee_Hall2 ай бұрын
Replaced my RL ABS sensor this evening, but sadly the ABS and traction control lights are still on along with the warnings about hill start and city stop. I fear the problem might be else where i.e. broken wire or dodgy connection somewhere on mine. Accessing that torx screw was bit of a pain, trying to see what you are doing and finding a angle to get the screw driver in.
@Martysworkshop2 ай бұрын
Thank you for your input
@joshuamason32612 ай бұрын
Try sticking a 1 mil washer maybe just a little smaller if you can get hold of one. Some times the abs ring swells.
@radishpea66152 ай бұрын
Great video, this is a job I have to do.
@Martysworkshop2 ай бұрын
Thank you for watching
@Mike-Gor4 ай бұрын
Thanks from Russia 😉🛠
@Martysworkshop4 ай бұрын
Thank you for watching
@Martysworkshop4 ай бұрын
Thank you for watching
@PHILSWINGIT Жыл бұрын
nice vid thanks for the info
@Martysworkshop Жыл бұрын
Thank you for your feedback
@69tads Жыл бұрын
Thanks for your video, saved a lot of hassle
@Martysworkshop Жыл бұрын
Thank you for your feedback
@Callum_English3 ай бұрын
My MK3 has the ABS light, no stop start and speedometer not working now. It's the same problem?
@Martysworkshop3 ай бұрын
I'm not sure sorry
@julianhill-boxedpixels4580 Жыл бұрын
Thanks Marty good to know its an easy enough fix. Is it safe to drive with both these lights on as cant get to the garage for 5 days or so.
@Martysworkshop Жыл бұрын
Only thing it efects is you traction control and abs won't work, the brakes will revert to standard braking
@bobjit2523 ай бұрын
Yeah the other side not so easy as there is no hole you can look through , but that’s the thing every one on you tube always does the easy side 😂
@Martysworkshop3 ай бұрын
True, thank you for watching
@sajhussain9848Ай бұрын
I got quite easy access to it from behind with a long extension and 1/4 inch ratchet but agreed, the left side isn't as easy. I didn't remove the wheel on either side.
@psychedelic471 Жыл бұрын
i have a problem on my ford focus mk3 i changed the abs sensor on the rear wheel and still i have the abs and esp and tire warning light on the screens after they told me to change the cable abs which matches the wheel sensor with the bottom of the car but still the same problem with the lights on the dashboard do you have an idea or a solution to my problem thank you
@Martysworkshop Жыл бұрын
You need to read the dtc in the abs module was it a voltage code? Or a tone ring code? It could be the tone ring built into the wheel bearing.
@psychedelic471 Жыл бұрын
@@Martysworkshop I packed it is noted U0415:00 ODDTCs received invalid data from ABS control module (A) Thank you
@jonathanwood6522 Жыл бұрын
What is the price range of a fix like this on 2010 Ford Focus?
@Martysworkshop Жыл бұрын
Well the sensors is around £20 for the sensor (link in description) then Labour in mu area is around £50 an hour so no more than an hour to replace, and some garages charge a plug in fee for the diagnostic whitch can cost anything up to £50, so no around £100 -£150 depending on garages I guess. Hope this helps
@ianmorris77152 ай бұрын
Great video, where did you get the sensor from, and is there one on each side. I really don't want to go to ford. Tia
@Martysworkshop2 ай бұрын
I got the sensor from mu local factors
@radishpea66152 ай бұрын
This video was very helpful but doing the nearside/left side it was not that easy. Visibility and hand access seemed much harder. I found the damper was in the way.
@Martysworkshop2 ай бұрын
Thank you for your feedback
@ZhinoZ Жыл бұрын
on my ST 2013, i have the issue with the odometer it does not shows the speed, only works the RPM, any idea how to fix it??
@Martysworkshop Жыл бұрын
Is the abs light on?
@ZhinoZ Жыл бұрын
@@Martysworkshop no, the only light that is on is for the catalytic sensor.
@Martysworkshop Жыл бұрын
Not sure then sorry would need to be plugged in
@memeprez1281 Жыл бұрын
@@Martysworkshopsame with my 2017 se focus my abs is along with traction control
@gomezk9796 Жыл бұрын
Marty I need some help with my Lt50 quad, could you help me please and thank you
@Martysworkshop Жыл бұрын
Sure what's the problem?
@gomezk9796 Жыл бұрын
I need to send you a photo for you to get a better understanding
@Martysworkshop Жыл бұрын
Sure my email is martindando34@hotmail.co.uk
@corymerry33996 ай бұрын
My abs lights and traction lights came on one day. So I watch this video and think I figure it out. After replacing both rear wheel sensors the lights are still on and now the red brake light it on. Idk what to do. Lol maybe I'll replace the fronts and see what happens
@Martysworkshop6 ай бұрын
Yea probably the front
@corymerry33993 ай бұрын
@@Martysworkshopso I replaced all the sensors front and back. Still abs lights. Bought an abs scan tool and it says it's the rear l and r. I had the old ones put them in and still says the rear. I'm going to order oem ones and see if this changes it. I'll update
@Martysworkshop3 ай бұрын
Please let me know how you get on
@corymerry33993 ай бұрын
@@Martysworkshop So I have an update! The local parts store sold me the Grey wheel sensors. My model is the 1.0l Se w/o parking assist. My car came with black sensors oem. I went back to the parts store and purchased 2 black wheel sensors and took out the Grey ones and bam! No more ABS lights!!! Make sure to see if your model can use the Grey sensors for parking assist or black sensors for non parking assist.
@joshuamason32612 ай бұрын
@@corymerry3399I wouldn’t go off colours 🤪 mine has parking assist and they are black.
@AT-ww6pj Жыл бұрын
I did mine and the bolt snapped in the hole :(
@Martysworkshop Жыл бұрын
Ow did you have any luck getting it out?
@bikercamper8714 Жыл бұрын
He must not have 😂
@oldxoul Жыл бұрын
i have the abs, traction and my mph not working
@Martysworkshop Жыл бұрын
Then you have a wheel speed fault
@oldxoul Жыл бұрын
@@Martysworkshop i changed the sensor and still the same thing 🤦🏽♂️i recycled the key too. no codes
@Martysworkshop Жыл бұрын
Did you drive it far after?
@oldxoul Жыл бұрын
@@Martysworkshop about 10 miles
@Martysworkshop Жыл бұрын
That's more than enough, so what scanner are you using? Does it have live data? You would need to pull up the 4 wheel speeds on a graph and drive the car then compare the signals, if 1 is missing or all over the place then that is your problem area, it could also be the pickup ring witch is ether in the wheel bearing or mounted on the hub