Ford Focus U1900 fault code REPAIRED!!!

[@ifeanyidike9272]

Wow... My instrument gave me issues for up to a year... It was so frustrating.none of the technicians I took it to could fix it.....but after watching your video, I got it fixed myself...today, my car started without any hassles and errors... Thanks a lot...

[@melsmotors]

That's great, thanks for the feedback and thanks for watching 🙂👍

[@barbarianking1748]

You have made my day I've done exactly what you did and it's alive again thank you very much!!!!!!!

[@IIKlaplonGII]

Thanks for this. The fault I had was because of the transponder in the key. I now use my other and the fault hasn't occurred anymore.

[@canuseemygrapes]

Re-flowed my friends Focus clocks last night. Fired right up today with no errors.. Thanks Mel..

[@Cripinub1]

Could you see any cracks in the joints? I’m looking for it but can’t even see any foul play in the joint s

[@canuseemygrapes]

@@Cripinub1 maybe one of them was dubious although I only used a 1980's/90's ring light magnifier my mate got me from his works clearout. Unleaded solder is used from the factory, this has little flex properties compared to full fat solder with a tasty bit of lead in the mix. Ive done 4 of these clocks now and the audio unit from a Ford Ranger. Its always the shitty joints

[@toranaman4646]

Thank you for this video It helped me fix mine. My solder joints looked fine but I reflowed them anyway and it worked.

[@melsmotors]

Great and thanks for watching, glad it helped you out 👍🙂

[@Cripinub1]

I’m trying to find a broken joint but can’t see it, all looks fine. Gna reflow and see what happens

[@Jim-re3sr]

Great video. They don't build them to last anymore

[@IB66145]

Great job, like the rationale at the end. Am going to do mine.

[@MadAl37]

What scanning tool/software are you using? I've got the same issue when driving losing all power. Just started happening.

[@melsmotors]

I use a variety of scan tools, Snap On, Launch, Autel, Topdon, Texa, Ancel, Foxwell, and a few others, no garage can survive with one scan tool!

[@Snookred1]

Hey I subscribed to your channel. Will it just cut off while your driving and when you try starting it just cranks?

[@melsmotors]

Usually keeps going whilst driving, but it will stop you from starting when it goes wrong

[@pauloneill8912]

i stupidly removed the needles before marking position, is there a way to reset or calibrate these pointers once removed?

[@melsmotors]

DOH! Only with a scan tool

[@GucciSweatsuit]

After the repair my throttle won’t work, could it be due to the reason I didn’t clear codes? I do not have the device but I did unplugged and replugged the battery…

[@melsmotors]

I have no idea! Are you sure that none of the solders are touching?

[@allandobbs7059]

Is the same applicable to the Ford C-max 1.8 petrol 2008?Fault code is the same.Says engine malfunction speed limited mode on dash?

[@melsmotors]

It should be the same, check with your mechanic first 👍

[@callumb5310]

Hi, did you ever find out what the problem was? I've got exactly the same car and problem, comes up with engine and transmission malfunction as well as U1900 code

[@secretmedia-sm3389]

Hi mate my car is ford falcom futura mk 11 ,while i was driving it just cutoff everything ,no brakes ,couldnt eventurn the steering wheel,i just crossed a red signal luckily i went to leftsise and the car stopped,what might me be rhe issue

[@melsmotors]

I have no idea! You need to at least scan it and get some sort of information out of the car!

[@omardeleon867]

This is a great video, will certainly help me. Great job

[@melsmotors]

Thanks for watching and I hope you get your issue resolved 👍😁

[@SirionPrime]

Can you share how do you manage to get the dashboard out?

[@melsmotors]

Sadly if it's not in the video I won't be making another video on how to remove it, sorry. It is relatively easy, there must be a video out there showing it. Thanks for watching 🙂👍

[@IB66145]

kzbin.info/www/bejne/lZmYYaubermLbbs

[@ungodlysorrows]

Hey man I have a 2008 crown Vic police interceptor and I’m getting this code along with a few others. It states this : CAN Communication Bus Fault - Receive Error Status: Request - Previously Set DTC - Not Present at Time of - Malfunction Indicator Lamp is Off for this DTC Module: Instrument Cluster Diagnostic Trouble Code details CAN Communication Bus Fault - Receive Error

[@ungodlysorrows]

I have nothing wrong with starting it just taking it out of park takes about 5-15 seconds and everything I believe works on the dash I did the lights test and I think everything came on

[@ungodlysorrows]

Any idea why it would say that then ?

[@melsmotors]

@@ungodlysorrows I have no idea buddy, if I could fix cars via email I would be a millionaire by now 🤑😂 it could be the same issue as this! Good luck

[@paulreddy664]

My st is giving the same u1900 fault code...but it starts ...with engine malfunction...an pedal sensor fault

[@melsmotors]

Pull out the dash and wiggle the wires whilst the car is running and see if you get other lights flickering 🤔

[@paulreddy664]

@@melsmotors thanks ...mechanics were ripping me of with parts that was not needing replacing....even ford ripped me of ...

[@williamgillan4457]

anybody can fix it for me £150 in pocket need the car so bad 18/6/2022

[@melsmotors]

@@williamgillan4457 your sentence is a little unclear, what are you asking? Regards Mel

[@williamgillan4457]

hi there i think the fuses in my engine fusebox want checking out,after hundreds of urning ignition key it starts,but goin shopping and leaving it,it is very haed to start again,apart from that there bloody good cars £20 a year road tax and 60+ mpg i am in maulds meaburn near shap had p[eople round to cut the keys but no mobile mechanic round as i am a pensioner and cant afford there prices,its a good job i have got an electric bike to get around ford focus 1.6tdci econetic model 2010

[@johngouker3887]

You could shut off the drama music please

[@melsmotors]

You could just as easily turn it down! Thanks for watching hope the video helped 🙂👍

[@stuartdixey4355]

The music is so annoying I could not continue watching.

[@melsmotors]

@@stuartdixey4355 doesn't your device have a volume button? What a silly comment which had a simple solution!

[@stuartdixey4355]

@melsmotors so how am I to hear the commentary from the video. I am having a similar problem with my car. It is not a silly comment. I want to fix my car.

[@CarlProsser]

U1900 -20 code I have got

[@melsmotors]

Hi U1900 is usually this problem. Some scanners add extra numbers at the end of the fault code!

[@Wisdom-jp4qe]

What is that stupid background music??

[@melsmotors]

You can use the volume control on your device to turn down any music that you don't like, simple!! 🤔🤦‍♂ Thanks for watching 😊👍