Ford Focus Intermittent Start cluster repair

In this video. I am showing you how to fix a Ford Focus cluster when it doesn't start up and it comes up with multiple faults on the screen display.
#fordfocus,
#fordfocusclusterrepair,
#fordimmobilizerrepair,
#fordfocusclusterfix,
#fordfocusdashboard,
#fordfocusclocks,
#fordfocusspeedorepair,
#fordfocusimmobilizerclusterrepair,
#fordfocusnonstart,

[@sammahasona]

very detailed video with clear end to end instructions. Thank you so very much!

[@sigttrs]

Thank you for your time to make this video. I solderend all the connecting points of my 2007 CMax today, with new solder and the errors were gone. Hopefully it stays that way. Your video was very helpfull. Except the removal of the indicators is much easier with 2 vingers pulling while turning against the clock instead of the spoons 😉. Greatings from The Netherlands 👍👍👍

[@lmfaoJay88]

Thank you for fixing my cluster unit for me too. I was smacking it for about 6 months

[@zacrazy59]

Hi ! Just fixed it. Very useful and helpful video. Thanks from France !

[@dantaube3971]

great video. very clearly explained. i’m gonna give it a try

[@cofty]

Thank you excellent tutorial, especially the tip on calibrating the needles

[@siegyriesenweber757]

Gotta love KZbin... Worked perfectly thanks

[@brianfearn4246]

Many thanks this was more of a problem with the earlier mk2 focus when they used lead free solder. It seemed to have disappeard on the face lifted mk2.5 from 08 but it has happened on these too 😊

[@vincenzolista4380]

Complimenti 👍👍

[@doenovipazar]

Bravo! Thanks!

[@Alex-zp7vf]

Show estou com um aqui dando este problema vou reparar assim

[@markgray7712]

Hi The Fix,does it matter what size solder wire to use? Thanks

[@thefix9823]

Hi no it does not matter

[@markgray7712]

@@thefix9823 thanks,been going on 6 months,all fixed in couple hours after watching your video👍🏻

[@iainwelsh9372]

Many thanks for your very clear instructions. Job done!

[@davewilkos26]

hi i have soldered but now my rpm, water gauge and petrol gauge are playing up when plug it back in. they end up not where there meant to be. Thanks

[@azzaro316]

mauvaise soudure : il faut d'abord mettre la panne du fer à souder sur la PIN, et faire chauffer, puis mettre l'étain sur le pin. mais il faut pas merttre d'abord l'etain et apres la panne du fer à souder. il faut utiliser une panne de fer à souder plus fine car vous faites des boule de soudure. Il faut améliorer votre technique de soudure ;) bonne réparation ;)

[@robertottewell3624]

did everything right sent off did not work

[@davewilkos26]

now car wont start

[@Пульс_888]

😂😂😂😂😂😂😂