Ford fusion 3.0 oil pan gasket

Ford fusion 3.0 oil pan gasket

[@MrJamesdefreitas]

Very helpful thanks man! For those of you thinking you can get around removing the exhaust manifold that unfortunately is not the case.

[@chutemuchafibra]

just look at the retailer part for this ford fusion v6 and you will see, rock auto , autozone , napa, anywhere you like

[@MrJamesdefreitas]

@@chutemuchafibra thanks but on mine it’s one solid piece welded end to end to the exhaust manifold, if you get lucky and can remove it because you have a slightly different year then great but that wasn’t the case for my 2008 mercury Milan v6

[@MrJamesdefreitas]

@@chutemuchafibra thanks but on mine it’s one solid piece welded end to end to the exhaust manifold, if you get lucky and can remove it because you have a slightly different year then great but that wasn’t the case for my 2008 mercury Milan v6

[@russ3080]

Huge, huge help!!! Thank you so much!!👍👍👍

[@dragnet53]

I swear Ford doesn't like making things easy for people to repair their own vehicles.

[@k1ngtazz]

I don’t know how yours came out so easy on mines the bottom clips making it hard to come out

[@michaelcurry693]

Brother you don't have to remove the fan manifold I did it just disconnect exhuast pipe front of muffler and bolts before cat drop pipe and remove bolts from pan

[@shanez044]

Could you clarify this please

[@jasoncurtis4738]

That’s a nice oil pan gasket

[@hectormateo2982]

I was thinking the same thing why would you have to remove the manifold?

[@chutemuchafibra]

also half of video removing the fan ....................infinity.....................................................etc.

[@MrJamesdefreitas]

This is not correct, On a Ford Fusion or Mercury Milan V6 2008 model the manifold is connected straight on, so you must remove the radiator fan, and the exhaust manifold, sorry no getting around it.

[@superdatawolf4652]

Dang, you have to remove alot of things first to get to the pan gasket? How long does this job take? And how much would be the labor and a new gasket and pan? Thanks

[@kevinbru5875]

Take the cost of a new pan and double it. Some areas have a higher hourly charges than other, but this calculation will give you a good idea of the cost

[@pixilatedshots7569]

You don’t have to take off all the stuff 😂

[@MoLassessss]

@@pixilatedshots7569 maybe not the fan but you definitely have to move the exhaust out of the way. I have this same car.

[@MrJamesdefreitas]

@@pixilatedshots7569 Yes you do. For the Ford Fusion 2008 3.0 V6. The manifold is welded as one single piece.

[@wholesaleimports3217]

Called a torque mount

[@michaelcurry693]

You making too much extra work for yourself I did it to replace rod bearings

[@MrJamesdefreitas]

No he isn't, this is the only way to do it.