Ford mondeo mk3 front bumper removal

[@stevewarburton6803]

Good info and an insight how to get it off I took my headlights out and saw the (rusty) bolts came up from underneath and thought Na ill do that another day. That day has now come. Didn't know about the 4 front clips either so this was a bonus to watch. Hopefully my intercooler upgrade will be a lot less hassle this weekend. Poxy headlight jet might get fixed too. Cheers for the info. 👍👍👍

[@nicam49]

Excellent! Did mine years ago and just needed a refresher as need to change rad + a/c condenser.

[@damianjones1806]

Is the metal bar behind it a bolt on? The 1 that goes across the front of radiator

[@lucianistoc1264]

Short and precise, thank you!

[@johanneshofer8772]

Thx from Austria - well done

[@brendanasey2017]

have you done a rear bumper removal on the mk3 bud...

[@smiths01ify]

+brendan asey I haven’t mate but I would imagine you undo in the rear arches / underneath the bumper and possibly along the top of the bumper

[@MrEvilWasp]

@@smiths01ify .. I was hoping you had as well. There are loads on youtube about the front bumper removal but no rear bumpers. You are very clear with your instructions so was hoping you had a vid on it. Peace

[@nicam49]

Hi, rear bumper removal? Look on www.fordwiki.co.uk, select 'Mondeo' , then 'mk3' , then look in contents listing for 'rear bumper removal'

[@lukakovacevic5480]

can ST bumper be put on stock mondeo

[@martinburbridge7545]

yes it only has extensions for front skirts

[@zWaveGaming]

Ford Mondeo Front Drivers wing removal?

[@smiths01ify]

+Adam Law hi , I didn’t have time to make a video , but the majority of wings are the same , bolts along the top , bolts inside the wheel arch ( we’re Door meets ) and also bolts at the front ( were the bumper meets ) hope this helps 👍👍👍

[@terencejay8845]

I should have done this to get to the top washer-bottle 10mm bolt. Otherwise, it's a bugga to get to.

[@kazimierzgolshanski8808]

Что можно увидеть при такой плохой сьемке?

[@ИгорьЛчшенко]

Нихера