Ford pk ranger egr delete

[@toshtwentythree195]

Well Done...Great video..Very helpful .Thankyou

[@skinnydipper3493]

thanks for posting this. I was wondering, have you checked your valve clearances on this motor, do you have a video of the procedure. Cheers and thanks.

[@shankaranandravichandran4357]

Hi. I have the same model in India. For me the exhaust bypass is not working properly, how do i rectify it.

[@raypalise4512]

if you blanked off everwhere why take the vacume line off the egr and block it that thing on top tells the ecu where the egr is at any piont in time

[@gwmechanical7402]

Had any dramas since? Drives better/worse?

[@Navcheema20]

Hi bro u know where is accelerometers sensor placed in this model i have code C1949 Accelerometer sensor circuit opne (ABS) yellow light one

[@paulthompson1654]

EGR always requires 2 parts to successfully bypass/defeat 1/ egr blanking plate installed as per the 3minute 2/ electronic defeat by simulation of electrical signal 3/ disconnect egr water hoses then join hoses so water is sent back to engine . DO THIS PROPERLY NEVER KINK HOSE AS IT WILL LEAK EVENTUALLY without DOING both 1/2 a fault will be registered and may turn on engine light eventually limp mode may occur

[@jonathanwilliamson5484]

Hi have you got a link for the catch can and blank plate please ? Thanks

[@GerryMetrillo]

Hi bro, can u send picture of the blanking plate?

[@baxtaN80]

I just did this to my ranger today and the engine light is showing now, will this cause any problems in the future if I use this method and not get a new egr

[@benmolloy5074]

You need a egr delete plug aswell as the blanking plate, or you could damage your engine plus a scanner to clear your code

[@KB-yb7vy]

@@benmolloy5074 what do you mean delete plug

[@benmolloy5074]

@@KB-yb7vy Egr delete kit, type it into Google you find it, plugs into your airbox and send the correct signals to your car so it doesn't cook your engine, notj ijng wrong with blanking it off, you just want to get the plug to stop any damage that may occur from the blanking plate,

[@cleve69er]

@@benmolloy5074 the plug does not do anything i dont have no egr at all on mine and installed the plug still got an engine light and my scan tool wont remove the code

[@sgtjonzo]

​@@cleve69eryou will not be able to "remove the code" with a scan tool you need an ecu remap