in this video I'll share with you how to quickly diagnose the root cause of a crank no start condition on a ford powerstroke engine #Powerstroke #PowerstrokeNoStart #InjectorDriverModule #Injectors
Пікірлер: 201
@tracylenderman83003 жыл бұрын
Very impressive straight to the point and easy to understand
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Tracy Lenderman Thank you!!!
@SamofCR2 жыл бұрын
Very good information. I have been fighting this '96 for two weeks. Thank you.
@KITS_Auto_and_Truck_Repair2 жыл бұрын
SamofCR My Pleasure!!
@OutdoorTonez3 ай бұрын
My 7.3 it was my idm. Mine retained water. Got a new one and it’s been working. I had the ford dealership test it and they did fix it. IDM replaced 😊
@KITS_Auto_and_Truck_Repair3 ай бұрын
@OutdoorTonez Oh cool!
@user-uj1xg7hb2u6 ай бұрын
You are the person I will never forget in my Auto Electrical Repair Works. Thanks
@KITS_Auto_and_Truck_Repair6 ай бұрын
@user-uj1xg7hb2u My Pleasure!
@meltdownman97262 жыл бұрын
This was legit. EXCELLENT JOB!!
@KITS_Auto_and_Truck_Repair2 жыл бұрын
MELT DOWN MAN Thank you!!!
@frankdaiii64034 ай бұрын
FANTASTIC VIDEO. Great process of elimination with TESTING and not part swapping.
@KITS_Auto_and_Truck_Repair4 ай бұрын
@frankdaiii6403 Thank you!
@renemata5806 Жыл бұрын
Excellent diagnosis thanks for sharing your knowledge bless you perfect job
@KITS_Auto_and_Truck_Repair Жыл бұрын
Rene Mata My Pleasure! Thanks
@christopherrice880 Жыл бұрын
Thank you this was a great video and I love how you went step by step on explaining how to test it I have the same issue vary knowledgeable guy
@KITS_Auto_and_Truck_Repair Жыл бұрын
christopher rice My Pleasure! Thanks
@josephmurray9233 Жыл бұрын
Great job like how you walked thru the testing
@KITS_Auto_and_Truck_Repair Жыл бұрын
Joseph Murray Thanks !
@buntik16872 жыл бұрын
Learned a lot. Great video! 👍🏿
@KITS_Auto_and_Truck_Repair2 жыл бұрын
buntik1687 Thank you! I'm glad to hear that the video was helpful!
@jeramiet1543 жыл бұрын
Very knowledgeable. Great video.
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Jeramie T thank you
@georgestennis54133 жыл бұрын
This was a great video! You did a great job explaining and diagnosing the issue. Thanks for sharing your knowledge.
@KITS_Auto_and_Truck_Repair3 жыл бұрын
George Stennis thank you!!
@akquicksilver2 жыл бұрын
Great vid with good explanation!
@KITS_Auto_and_Truck_Repair2 жыл бұрын
JB Thank you!!
@JuanCastillo-sb7fp3 ай бұрын
Awesome diagnostic
@KITS_Auto_and_Truck_Repair3 ай бұрын
@JuanCastillo-sb7fp Thanks!
@gregorylancaster4273 жыл бұрын
Great video, subscribed and saved video for later use. Very informative.
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Gregory Lancaster Thank you!!!
@imurtroll5242 Жыл бұрын
Great video and explanation
@KITS_Auto_and_Truck_Repair Жыл бұрын
imurtroll Thank you!
@noecovarrubias68139 ай бұрын
Very good explanation thank you
@KITS_Auto_and_Truck_Repair9 ай бұрын
@noecovarrubias6813 My Pleasure!
@goskatetoday Жыл бұрын
Great video!
@KITS_Auto_and_Truck_Repair Жыл бұрын
Jason Core Thank you!!
@bennyburgess403621 күн бұрын
Great video very Informative
@KITS_Auto_and_Truck_Repair20 күн бұрын
@bennyburgess4036 Thank you!
@Chon20242 жыл бұрын
Thanks great video and a way to go step by step had same issue 💪💪
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Francisco Chon My Pleasure!!
@benscot57282 жыл бұрын
🤣🤣 the flexing emoji is to funny
@kevinwoods23673 жыл бұрын
Hey really enjoyed the video it very informative
@KITS_Auto_and_Truck_Repair3 жыл бұрын
kevin Woods thank you!!!
@Ranjsounds6 ай бұрын
You make a good informative video. Thank you
@KITS_Auto_and_Truck_Repair6 ай бұрын
@ranjitbidwal6309 My Pleasure! Thanks
@Ranjsounds6 ай бұрын
@@KITS_Auto_and_Truck_Repair do you need a special scan tool to do the injector test or can autel do it?
@anthonydowns452 жыл бұрын
Great job!👍🏿
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Anthony Downs Thank you!!
@rockscrambler67004 ай бұрын
Impressive! Subscribed!
@KITS_Auto_and_Truck_Repair4 ай бұрын
@rockscrambler6700 Thanks and welcome to our youtube community!
@imfamemitotero71717 ай бұрын
Thanks for the info
@KITS_Auto_and_Truck_Repair7 ай бұрын
@imfamemitotero7171 My Pleasure!
@JorgeTorres-lj6dt2 жыл бұрын
great job buddy
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Jorge Torres Thanks!
@ashifmohammed8615 Жыл бұрын
Good knowledge sir
@KITS_Auto_and_Truck_Repair Жыл бұрын
Ashif Mohammed Thank you!
@carlmoseman6717 ай бұрын
Good job!
@KITS_Auto_and_Truck_Repair7 ай бұрын
@carlmoseman671 Thank you!
@reinaldoburgos33955 ай бұрын
Good job
@KITS_Auto_and_Truck_Repair5 ай бұрын
@reinaldoburgos3395 Thank you!
@davidianero552810 ай бұрын
Nice job sir
@KITS_Auto_and_Truck_Repair10 ай бұрын
@davidianero5528 Thanks
@manuelarcerivera8460 Жыл бұрын
Nice!
@KITS_Auto_and_Truck_Repair Жыл бұрын
MANUEL ARCE RIVERA Thank you!!
@sherwoodrogers43393 жыл бұрын
thanks for teaching me how to tell if my icm is good or bad. very good video and very good teacher. now i have figure out my problem . not the icm ..... how do you test the pcm?
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Sherwood Rogers My Pleasure!! it's pretty much the same process!!
@brittneywilliams743 жыл бұрын
Great job awesome video extremely helpful < I am Dad of kid in pic> I have two 7.3 powerstrokes
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Brittney Williams thank you
@kyriederrick30533 жыл бұрын
A trick : watch series on flixzone. Been using it for watching loads of movies lately.
@imrandavis40313 жыл бұрын
@Kyrie Derrick Definitely, have been using Flixzone} for years myself =)
@rauleduardoperezuribe40813 жыл бұрын
Hola amigo tengo una falla muy parecida a la tuya pero en mi caso el modulo si hace la prueba de los inyectores pero sigue sin arrancar, algún consejo? El escaner marca el código P0200
@lloydmartinez2330 Жыл бұрын
Ben your doing the buzz injector drive module can you here the individual injectors buzz without the scanner
@KITS_Auto_and_Truck_Repair Жыл бұрын
Lloyd Martinez No! You can't hear them individually without a scanner!
@thomasmiller19432 жыл бұрын
I have crank no start and it only happens sometimes, most of the time my truck turns on . My wait to start light turns of fast then check engine light turns on and obd scanner won’t communicate I already changed glow plugs and solenoid me ipc and cam and all sensors except exhaust and hhop
@kellysimonson13072 жыл бұрын
Excellent video. Trying to diagnose my son's 7.3. crank no start, I'll have him check powers and grounds. Fuse #22 big 30 amp, no power at either side of fuse, any thoughts?
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Kelly Simonson check main fuses or fusable links on the power cables coming from the battery!!
@TheDogLife5225 Жыл бұрын
Had my 96 7.3 die on the highway... fuel bowl heater shorted out and blew the 30a fuse. Replaced fuel bowl heater and fuse and fired right up. The old heater used a looped wire which broke loose and caused the short.
@richardvarner2302 жыл бұрын
Great informative video. Is there a way to do the "buzz test" without having the diagnostics computer?
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Richard Varner no you can't! you have to have a scan tool capable of doing that test!
@orcoastgreenman2 жыл бұрын
i got a bluetooth OBDII adapter and forscan on my iphone to be able to do some of the diesel specific tests and view data to/from the PCM & sensors.
@lloydmartinez2330 Жыл бұрын
Thank you for this information
@chrisrel9750Ай бұрын
Like your diagnostic tool. Where do I get one?
@KITS_Auto_and_Truck_RepairАй бұрын
@chrisrel9750 Thanks! you can get it online from snapon.com
@hipairbrush10533 жыл бұрын
I have a 7.3... had the same problems. I replaced the cam shaft sensor twice...second time I used a ford part. Didn't fix my problem.... I replaced the ICP sensor and it would not start. Put the old one back in and it started, but ran rough. Swapped the bad sensor, put it in and it ran like a charm. The next day the truck would not start. Any idea what could cause this? I am going to try yet another sensor for the ICP. This blows my mind how it worked yesterday and not today. Thank you in advance
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Hip Airbrush you should check your injection pressure, sounds like you might have a defective IPR or bad high pressure oil pump... get a pressure gauge and install it on the ICP sensor opening, crank the engine and see what kind of pressure you get
@mark972132 жыл бұрын
I'd hire you in a heartbeat to troubleshoot my 1994 7.3 IDI Crank but no start.
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Bank It Thanks!! did you have a pro look at it!!
@mark972132 жыл бұрын
@@KITS_Auto_and_Truck_Repair I've tried to hire a mobile mechanic but as soon as I say Diesel IDI then run away.
@KITS_Auto_and_Truck_Repair2 жыл бұрын
@@mark97213 that's sad!!
@aymenmohamed1134 Жыл бұрын
👍👍🌷🌷🌷
@KITS_Auto_and_Truck_Repair Жыл бұрын
Aymen Mohamed Thank you!!
@GenerationsLodge Жыл бұрын
Excellent troubleshooting video. My truck was running fine when I shut it off 2 years ago. Upon starting it recently, it started, ran rough and died. Now, no start. The ICM was full of water, swapped it out. Replaced the cam position sensor, fuel filter, IPC, and put a gauge on the HPOP. Finally towed it to a diesel shop, and 6 weeks later, I owe more than the truck is worth, and it still isn’t running. They’re telling me that it needs 2 injectors, and if one stops up, it can prevent fuel,from getting to all of the injectors. Am I being had by this shop?
@KITS_Auto_and_Truck_Repair Жыл бұрын
nclaytonc I wonder why they replaced all those parts!!
@GenerationsLodge Жыл бұрын
@@KITS_Auto_and_Truck_Repair in all fairness, it was I who replaced the parts before I finally decided to take to someone else. The Injector Control Module was full of rain water, so I condemned it. The IPC, cam sensor were cheap enough, and the fuel filter had 148k miles on it. I talked at length with the mechanic yesterday. He was a Ford tech for a dozen years, and trained other techs on the 7.3, 6.0, and the 6.6. I was impressed by his knowledge and thoroughness, but the bottom line is we’ve spent a lot of money and it still does not run. The only parts that don’t check out at 100% are 2 injectors (#4 and #6). Right now, I’m waiting for the shop manager to come back from vacation so we can agree on a not-to-exceed repair cost. The no-start condition is being blamed on the tank of bio-fuel that has now been in the tank 4 years. I didn’t know that bio-fuel has the same issues as ethanol gasoline when it sits too long.
@KITS_Auto_and_Truck_Repair Жыл бұрын
@@GenerationsLodge ok!
@GenerationsLodge Жыл бұрын
@@KITS_Auto_and_Truck_Repair any thoughts on the bio-diesel thing?
@KITS_Auto_and_Truck_Repair Жыл бұрын
@@GenerationsLodge I don't know much about bio-diesel
@johnbevil4712 Жыл бұрын
The injector module relay number 303 in my 2002 Ford F350 diesel lariat is buzzing very loudly and the truck won’t start should I replace the relay or head towards the module itself time sensitive
@KITS_Auto_and_Truck_Repair Жыл бұрын
John Bevil check power and ground at the injector module first!
@michaelcox2648Ай бұрын
How to you test the 12v supply side of the injector driver for a shorted driver with a test light? I connected the test light to battery positive and and touched the test light to injector driver 12v supply to injectors. The test light was flickering. I know the light should only flicker on the control side when the pcm pulls them to ground. But it shouldn't flicker on the supply side, positive to positive should it? Did I do this right? Have I confirmed supply side injector driver shorted? Need a second opinion to confirm I did this test right please.
@KITS_Auto_and_Truck_RepairАй бұрын
@michaelcox2648 I didn't understand your question! are you trying to test the power supply to the injector or the injector driver module?
@michaelcox2648Ай бұрын
@@KITS_Auto_and_Truck_Repair it's the injector driver module with injectors unplugged the test light is flickering. Does that confirm injector driver supply shorted? Hope that makes sense.
@dehibyalvarez2933 Жыл бұрын
When I get my truck it coming with 2 battery but I'm desconet one of them ...can you please tell me if was grown what's I did,??
@KITS_Auto_and_Truck_Repair Жыл бұрын
Dehiby alvarez I didn't understand your question, sorry!
@peetky864511 ай бұрын
did your scanner hook up to OBD1 or OBD2 port. i thought OBD2 was 96 and newer?
@KITS_Auto_and_Truck_Repair11 ай бұрын
@peetky8645 I connected it to an OBD2 Port in the truck, I believe OBD2 was 91 and newer!
@seansarti62682 жыл бұрын
My check engine light doesn’t flash on and off when I turn the key. I have crank but no start. New fuel pump but still didn’t start. What should I look at?
@KITS_Auto_and_Truck_Repair2 жыл бұрын
sean sarti if the check engine light doesn't come on when you turn the key on, you should check the the PCM fuses, and powers and grounds at the PCM
@pedrogutierrez2382 жыл бұрын
what kind of scanner is the one you used for the ford diesel? could you give the model
@KITS_Auto_and_Truck_Repair2 жыл бұрын
pedro gutierrez Sure!! I used the Snapon Zeus in this video!
@kingrichard_10935 ай бұрын
I ran my 96 out of fuel and was able to get it to start yesterday but I had loss of power and then turned off. I charge the batteries and now I have a crank but no start. Could this possibly be my issue as well?
@KITS_Auto_and_Truck_Repair5 ай бұрын
@kingrichard_1093 Make sure your fuel bowl is filled with fuel
@berniemac84134 ай бұрын
Great job! Is there any way to diagnose without the scan tool? How can you test the signal to the injectors without that type of scanner?
@KITS_Auto_and_Truck_Repair4 ай бұрын
@berniemac8413 Thank you! you a good scan tool to do that test!
@KITS_Auto_and_Truck_Repair4 ай бұрын
@berniemac8413 Thanks! you need a good scan tool to do that test!
@berniemac84134 ай бұрын
@@KITS_Auto_and_Truck_Repair would any bidirectional scanner work? Or which would you recommend? Got a 05 sprinter that I’d like to use it on as well.
@dawaken47402 ай бұрын
Can the idm still be bad even if the buzz test works?
@KITS_Auto_and_Truck_Repair2 ай бұрын
@dawaken4740 Yes! if the buzz is not loud!
@keithwhitlock7262 жыл бұрын
What scanner do you use? Thank you.
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Keith Whitlock I'm using the snapon Zeus
@cub8620013 жыл бұрын
My 94.5 psd isnt showing that service engine light that you talk about in this video when you first crank It? I have a new idm and pcm, any recommendations on what to do next?
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Marcus Lopez did you replace the PCM? if yes, why did you replace it? you can start by check powers and ground at the pcm, to see if it's been powered!!!
@cub8620013 жыл бұрын
@@KITS_Auto_and_Truck_Repair I replaced it because of a leaking swollen capacitor, check engine light and wts does come on just no service engine soon
@KITS_Auto_and_Truck_Repair3 жыл бұрын
@@cub862001 most vehicles only have one light, it's either the check engine light or the service engine soon light, if the check engine light is on it means the engine computer is most likely been turned on, was the new PCM calibrated or programmed?
@cub8620013 жыл бұрын
@@KITS_Auto_and_Truck_Repair I sent it off to Cardone to rebuild it and program it, called ford and they don't make them anymore only rebuild your own, it's obd1 cus its a 94.5, has obd 2 hookup in cab but came not flashed for 2, can I eec test it since it's diesel? Or am I going to have to find a scanner for obd 1
@KITS_Auto_and_Truck_Repair3 жыл бұрын
@@cub862001 oh ok, you should have a mechanic look at it for you
@ronaldlemons2836Ай бұрын
why is testing the injectors next when it cranks and no start? can there be elec problems or good pressure at the fuel bowl but maybe fuel not getting to injectors, and if the orings are bad on injectors wouldnt the oil be thinner and fuel in oil??
@KITS_Auto_and_Truck_RepairАй бұрын
@ronaldlemons2836 that's possible yes!
@ronaldlemons2836Ай бұрын
So with crank no start, the injectors are the next step?
@donaldsterling9305 Жыл бұрын
K where does the IDM receive it's power from I have checked everything I can think of replaced the cam/ Crank sensor the oil/fuel pressure whatever sensor I don't have power to the IDM or the fuel pump
@KITS_Auto_and_Truck_Repair Жыл бұрын
Donald Sterling check your fuses!
@donaldsterling9305 Жыл бұрын
@@KITS_Auto_and_Truck_Repair I did I have like 5 with no power
@donaldsterling9305 Жыл бұрын
But I don't have an owners manual to see exactly what they go to
@donaldsterling9305 Жыл бұрын
Ok I checked all the fuses I have 5 that I have zero power to on either side of the fuse I don't know how to check relays and I have 4 in the fuse box and 2 under the hood on top of the drivers side front fender that I have found so far and looked for bad or chewed wires and haven't found any
@tuckswanger2 жыл бұрын
What if my truck starts when the engine is cold but when it's hot it will shut off even when driving it
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Danny Swanger you could have a failing IPR or a fail injector module as well, and list can go on and on and on, so I recommend you take your truck to a pro mechanic so they can diagnose it!
@matth00633 жыл бұрын
Where did he get on so quick? Ive been trying to find a pcm for my 95 7.3 with out waiting for shipping and im located near the area
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Hernandez The great we got that injector driver from AutoZone...try the AutoZone near you!!
@schawnfleites15553 жыл бұрын
@@KITS_Auto_and_Truck_Repair I got mine from o'reilly parts
@schawnfleites15553 жыл бұрын
My truck died in a Walmart parking lot and it turn out to be this. Worst three days of my life.
@KITS_Auto_and_Truck_Repair3 жыл бұрын
@@schawnfleites1555 that's awesome, did it fix your problem?
@KITS_Auto_and_Truck_Repair3 жыл бұрын
@@schawnfleites1555 oh really? that sucks...
@joshschoenickjared8146 Жыл бұрын
lol my truck is broken down on the side of the road ive tried everything I reallly hope this is it, happened while driving.
@KITS_Auto_and_Truck_Repair Жыл бұрын
Josh Schoenickjared Lol! Make sure there is power and ground to that module!
@ramelsaudi55302 жыл бұрын
Sir, regarding to my Engine T444e Only Timing cover Remove and changes this Oring Gasket after fixing the Timing Cover engine No Start Only Crank what is the Problem. Sir?
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Ramel Saudi Check your crank sensor! did you reconnect the sensor!
@ramelsaudi55302 жыл бұрын
Yes Sir Already reconnect the The Crank Sensor I change New but same Problem.. Only Crank but no Start
@thomasmiller19432 жыл бұрын
I need help bad and I can’t figure it out please help me
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Thomas Miller check high pressure pump output!!
@LowisRz3 жыл бұрын
How can I do a injector buzz test for a 7.3l with no obd2
@KITS_Auto_and_Truck_Repair3 жыл бұрын
350 luiZ no you can't do a buzz test without a scan tool, and it has to be a scanner with bidirectional controls...
@LowisRz3 жыл бұрын
@@KITS_Auto_and_Truck_Repair any tip on how I could check em
@LowisRz3 жыл бұрын
@@KITS_Auto_and_Truck_Repair or how I can test the idm
@KITS_Auto_and_Truck_Repair3 жыл бұрын
@@LowisRz you can't check them without a tool
@KITS_Auto_and_Truck_Repair3 жыл бұрын
@@LowisRz check your powers and grounds at the IDM, follow the steps on the video... Good Luck!!!
@melodycarrero4303 жыл бұрын
Hey i hava a question i have a 7.3 that only 4 injectors has power. The other 4 injectors that are in the passenger side that harness dosent have power what can it be and is not the valve cover harness 8 injectors are new. I change both computer too and still doing the same thing
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Melody Carrero it sounds like you have a wiring issue, check power and ground at the IDM, if you have power and ground for the injectors at the module , you should also have it at the heads, on both sides... be careful checking those wires, there is 200v on them/ the other possibility would be the module itself,
@ubiliadocadenas45293 жыл бұрын
Hi man where are you located I’m in Texas and I may need your services
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Ubiliado Cadenas I would like to provide my services to you but unfortunately I'm too far away from you... I'm located in Maryland
@IndiansAuto3 жыл бұрын
Next time use a volt meter. How do you know how many volts you’re getting?
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Indians Auto I don't really like using a voltmeter to check powers and grounds at a control module, I got burned a couple of times by using it, I prefer a test light since it's loads the circuit!!! you can have voltage but no current flow!!
@IndiansAuto3 жыл бұрын
@@KITS_Auto_and_Truck_Repair trust me man a test light will burn you more than a DVOM, if in doubt ohm out the circuit. But hey as long as it works for you, Keep doing what you do brotha, nuff respect!
@KITS_Auto_and_Truck_Repair3 жыл бұрын
@@IndiansAuto sounds good bro! I will keep that in mind!
@eddierose67702 жыл бұрын
What computer are you using ?
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Eddie Rose I'm using the snapon Zeus!!
@JuanRivera-ho7dm3 жыл бұрын
Where are you located at I may need your service
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Juan Rivera I'm in Dickerson MD!!!
@curiousgeorge9862 жыл бұрын
What's the scan tool you used?
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Calbert Garavito I'm using the Snapon Zeus in this video
@curiousgeorge9862 жыл бұрын
@@KITS_Auto_and_Truck_Repair yeah out of my budget. How did you hook up the scan tool to have it do an injector buzz test
@KITS_Auto_and_Truck_Repair2 жыл бұрын
@@curiousgeorge986 yes, it's a test that the scanner does!
@curiousgeorge9862 жыл бұрын
@@KITS_Auto_and_Truck_Repair I know that, I was inquiring how you hooked it up to do a buzz test
@KITS_Auto_and_Truck_Repair2 жыл бұрын
@@curiousgeorge986 hooked what? I didn't hook up anything but the scanner!! the buzz noise comes from the injectors
@allfamilyimportanddomestic85082 жыл бұрын
Would a scan tool from o Riley's work to read some codes and do some dionastic?
@KITS_Auto_and_Truck_Repair2 жыл бұрын
All family import & domestic I'm not familiar with scan tools from O'Riley's. you are gonna need a scan tool with bydirectional controls
@n.b.p.davenport70664 ай бұрын
I can tell you what it is but I just started watching the video so
@KITS_Auto_and_Truck_Repair4 ай бұрын
@n.b.p.davenport7066 Good!
@semperfi6838 Жыл бұрын
Why did it go bad?
@KITS_Auto_and_Truck_Repair Жыл бұрын
Semper Fi just age!
@MrMsMexican3 жыл бұрын
So a p0344 is a bunk code for cranking excessively
@KITS_Auto_and_Truck_Repair3 жыл бұрын
DIEhardHD I'm sure about that code... what's going on with your Powerstroke
@MrMsMexican3 жыл бұрын
@@KITS_Auto_and_Truck_Repair it won't fire worked the previous day everything works as it should you can hear the injectors clicking but nothing
@KITS_Auto_and_Truck_Repair3 жыл бұрын
@@MrMsMexican do you have enough oil in the engine... does the check engine light come on when you turn the key on?
@MrMsMexican3 жыл бұрын
@@KITS_Auto_and_Truck_Repair yes CEL is on the pcm is fully functional glow plugs kick on everything works and I added about a gallon of oil but but nothing but interesting has oil pressure, rpm is visible, bowl fills back up
@KITS_Auto_and_Truck_Repair3 жыл бұрын
@@MrMsMexican that's weird, disconnect the Injection pressure sensor on the driver side cylinder head and crank it with the sensor disconnected and see what happens, if that doesn't help, crack the fuel lines going to each cylinder head on the back of the engine next to the turbo then crank the engine, fuel should come out of those lines while you're cranking it... Good luck, let me know what you find
@elladrillerodecolumbiajesu23713 жыл бұрын
I fauns the module full of water
@KITS_Auto_and_Truck_Repair3 жыл бұрын
Jesus Mar oh really? I'm glad you found your problem...
@bennyburgess403621 күн бұрын
Rpm meter Isn't moving which mean ya have a bad cam position sensor
@KITS_Auto_and_Truck_Repair20 күн бұрын
@bennyburgess4036 check your crank sensor!!
@michaeleinherjer441 Жыл бұрын
One reason for a no start issue is your not heating the damned glow plugs 7.3s hate that shit
@KITS_Auto_and_Truck_Repair Жыл бұрын
Michael Einherjer DEFECTIVE GLOW PLUGS WOULD CAUSE A LONG CRANK NOT A NO START!