Glossy black roof is the way to go!! Great lowered look, now you need some tire letters! Make that kid at school pay for that damage!!!
@ReidG_RN8 жыл бұрын
Hopefully I can do the roof soon! I wish I knew who it was that hit my car... No note left.
@Falco168 жыл бұрын
Just another reason to get a dash camera!!
@mattsmith5928 жыл бұрын
My mustang has Sumitomo HTR Z III's in the rear and surprisingly, they hook very well.
@ReidG_RN8 жыл бұрын
That's actually what i'm looking at to replace my autocross tires with!
@cs52508 жыл бұрын
I'm doing this over the weekend but I completely forgot about the panhard bar so... Ill get that ordered lol
@ReidG_RN8 жыл бұрын
Did you get a set of GT500 strut mounts as well?
@cs52508 жыл бұрын
Well the thing is I'm going to run them on the stock springs until I can afford the shocks, struts, and the gt500 mount
@cs52508 жыл бұрын
*stock shocks
@ReidG_RN8 жыл бұрын
Chad Stuetzel I'd go ahead and do the GT500 mounts just to be safe. The stock mounts tend to fall apart when the strut assembly is taken apart and there's really no good way to put them back together.
@cs52508 жыл бұрын
RCGCarReviews ok ill check it out. I already have the bump stops, what brand panhard bar would you recommend?
@King_Kenny668 жыл бұрын
It looks very good Reid! Props to you for doing most of it yourself, too.
@ReidG_RN8 жыл бұрын
Thanks! It was a PIA, but worth it.
@thecarexpert218 жыл бұрын
Depends what you mean by tinting the tail lights. I don't think dark tinted tail lights would look very good, but some lightly tinted or smoked tail lights would look great!
@ReidG_RN8 жыл бұрын
Just a light smoke is what I'm thinking.
@realtalk46898 жыл бұрын
It looks good and a-lott more serious. Upgrades are easy to envision and expensive to have done, so be patient.
@ReidG_RN8 жыл бұрын
Haha thank you! You are correct.
@seanywatkins988 жыл бұрын
Definitely tint the taillights 😍😍😍
@ReidG_RN8 жыл бұрын
We shall see!
@fatalautomotive30498 жыл бұрын
Looking great, nice stang.
@ReidG_RN8 жыл бұрын
Thanks!
@sgfreak968 жыл бұрын
Awesome car man, looks super clean! The springs make it sit really nicely!
@ReidG_RN8 жыл бұрын
Thank you! I appreciate it. I definitely try to keep her clean, but the white paint & daily driver duty make that a hard job haha
@sgfreak968 жыл бұрын
RCGCarReviews Lol I bet, my car is silver and that's a pain as it is. Subscribing for more!
@ReidG_RN8 жыл бұрын
Gotta love owning a light-colored car, haha. Thanks for the sub man, always appreciated! I gave you a follow on Instagram, too.
@sgfreak968 жыл бұрын
RCGCarReviews I'll follow you back, thanks man!
@sebastian59148 жыл бұрын
lol your joke about the mustang going to the crowds made me Crack up! Also hearing all the things that you want to do yo the mustang gets me excited because it's going to look do good!
@ReidG_RN8 жыл бұрын
Haha thanks! Glad I could entertain.
@BriHomieFly8 жыл бұрын
hey RCG why not get a 3M clear bra for the hood and front bumper/
@ReidG_RN8 жыл бұрын
One of these days I very well may do that. Not a fan of the rock chips.
@fatalautomotive30498 жыл бұрын
Did you polish your aluminum wheels? Yours look brand new and mine don't look as shiny so I plasti dipped them.
@ReidG_RN8 жыл бұрын
Nope, they're pretty dull looking in person actually... I want to find a way to polish them though!
@dave116868 жыл бұрын
Looks great!
@ReidG_RN8 жыл бұрын
Thanks!
@TheRKHCollection8 жыл бұрын
Car looks awesome! I think you should leave the tail lights alone
@ReidG_RN8 жыл бұрын
Thanks! I probably will leave them as they are.
@clintcastillo15104 жыл бұрын
Is the rear still higher than the front end
@mdmeyers19826 жыл бұрын
Beautiful car ya got there!... I am about to do K springs on my 2011 with the Koni orange street struts/shocks... hopefully i dont have trouble with the panhard bar.
@ReidG_RN6 жыл бұрын
Thanks! It changes the look and handling of the car quite a bit. Good luck with everything!
@kennethbmason8 жыл бұрын
Did you need Camber Plates or Camber Bolts?
@ReidG_RN8 жыл бұрын
Normally, yes. Thankfully, the shop I took mine to for the alignment knew of the issue and was able to grind out where the lower end of the strut meets the remainder of the suspension assembly, saving me about $200.
@kennethbmason8 жыл бұрын
Ok. got some people saying yes, i'll need them and some saying no I won't. I called Late Model Resterations where I got the springs and they said I wouldn't need them. I'm confused as hell! I doubt if the shop near me will have the know how about the grinding... guess I really won't know till I put the springs on... and see how she sits. But thanks for the response... your car is bad ass btw.
@ReidG_RN8 жыл бұрын
Do you have an S197 Mustang? If so, you'll have waaaaay too much negative camber on the front wheels after you lower it, so there will have to be some way to adjust the camber on the car, wither with CC plates or with the grinding. But thanks man! Much appreciated.
@burnettchristopher458 жыл бұрын
Your car looks a lot better man. Question. For your tail lights, do you think putting LED's in the brake and reverse housings would give the car a more premium or upscale look so to speak?
@cruzanity74788 жыл бұрын
I live in Texas as well & was wondering how much they charged you for your custom plates. Nice looking stang btw!
@ReidG_RN8 жыл бұрын
$150 a year! Thanks man, appreciate it! What part of TX are you from?
@kylon3027 жыл бұрын
What kind of spoiler do you have?
@ReidG_RN7 жыл бұрын
It's the 3DCarbon Ducktail Spoiler. Link: www.americanmuscle.com/3dcarbon-ducktail-spoiler-0509.html
@k.c.l91808 жыл бұрын
Did you ever consider paint protection film? I have this for my fusion
@ReidG_RN8 жыл бұрын
I have considered it, but I figured since the front end already has so many stone chips, I may as well wait until it's not my daily driver. Or possibly wrap the car a different color all together.
@coreylandress50703 жыл бұрын
What’s your tire size
@yeevoviii8528 жыл бұрын
Are you on stock struts? And was the install of the rear springs easy diy in your driveway?
@ReidG_RN8 жыл бұрын
Stock struts for now. I'll upgrade when these blow out. The rear springs were much easier to install than the fronts, but I did it all in the garage fairly easily.
@Disasterpiece51508 жыл бұрын
Don't tint the taillights!
@ReidG_RN8 жыл бұрын
I'll probably end up leaving them as they are.
@Raptor-fu3nh8 жыл бұрын
looks like my when it was a virgin lol
@OscarAcosta-bh8ov5 жыл бұрын
Mustang GT 07 stripes on ur mustang look bad bro remove them removed mine looks way better