Ford Transit Van CV Joint Replacement Job. How to Change the CV Joint on Ford Transit MK8 Van.

[@bidders77]

Looks great....is this the same for mk7's?

[@diykhan]

Yes should be the same. Good luck 👍

[@chrisnewell-7758]

What brand of cv joint did you use please?

[@diykhan]

Its starline make

[@chrisnewell-7758]

@@diykhan thanks m8

[@mhfencinglandscaping310]

Hey, I used your video to help me change mine all was fine, finished and now have the worst vibration coming through the van any ideas? Cheers

[@diykhan]

Hi. Yes thats the other side of drive shaft not fully into the slot

[@diykhan]

U need to line up the grooves n then tap it into the slot opposite side to the hub.

[@diykhan]

Thats very common when u change the cv joints or cv boots. The opposite side knuckle comes out which need lining up into grooves n then needs pushing in.

[@mhfencinglandscaping310]

The opposite side?

[@mhfencinglandscaping310]

Thanks @diykhan it was the bearings on the outside of the driveshaft. TBH anyone looking to do this just replace the whole driveshaft, much easier than seperating the cv joint. It was out and back together within 45 mins! Thanks for the video 👍🏼

[@johnp6636]

Pain in the ass them transit mk7 and mk8 cv joints never been able to get them off

[@tonygoshive785]

This is a cv boot not cv joint ?

[@TheUltimate65]

Some cv jont have a clipring of nock of only, some cv jonit have a clip ring you must open up before yoy can nock off

[@diykhan]

This one didn't have one.