Thanks.. won’t be for a while, I want to do the Airfix S-7 first
@philipratcliffe14082 жыл бұрын
They used mild steel sheeting and riveted it on for strength and so the torps didn't damage the boat when launched. So yes there will be a small bit of metalwork.
@HarryHoudiniModels2 жыл бұрын
Ahhh good to know.. that would get a little rust then too streaking down from the rivets. Thanks Ratty
@basfinnis2 жыл бұрын
Looks like a really nice kit. Thanks for showing 😉
@HarryHoudiniModels2 жыл бұрын
Yes they have done a cracking job for a new company’s first release.
@Medomare2 жыл бұрын
A really lovely boat. Looking forward to the comparison of all three kits, when they are finished.
@HarryHoudiniModels2 жыл бұрын
You will be waiting a while. Although I am just about to complete the Revell kit, I don’t plan to build either the Fore or Airfix for a few years yet. Have too much else to clear in my WIP box.
@DutchDaveModels2 жыл бұрын
Nice kit Harry, I have the Airfix and Revell kits, but this one looks great with all those extra's, greets, Dutch Dave.
@HarryHoudiniModels2 жыл бұрын
Thanks Dutch Dave. Each of the 3 kits have their strengths and weaknesses plus the old Airfix kit has a nostalgic charm for me. The Revell is the Momma Bear kit, not too hot, not too cold, just right for most builders with a good balance of detail, but easily built. The crown goes to this Fore kit, but with the warning it’s just not for the beginner.
@jeffhardick2 жыл бұрын
This looks like a great kit Harry...can't wait to see the build videos...cheers from Nova Scotia
@HarryHoudiniModels2 жыл бұрын
Thanks Jeff 👍 be very similar to the Revell series but with Mandarin subtitles
@JedenSiedemDwa2 жыл бұрын
Nice kit! ;) Thank You for inbox from my favourite scale! All the best for You! ;)
@HarryHoudiniModels2 жыл бұрын
Glad you like it!
@GregReilly135ScaleModels2 жыл бұрын
Wow what a detailed kit what a beauty will look forward to your build
@HarryHoudiniModels2 жыл бұрын
Thanks Greg but don’t hold your breath, I have a few other WIP to get done first.
@SkyrayModels2 жыл бұрын
Cool looking kit Harry, I would be interested to see if they bring out more versions of the Schnellboot fleet.
@HarryHoudiniModels2 жыл бұрын
I think they will, as I noted in the hull plastic removal step, you only have that extra plastic if you want to build an S-100
@johnforeman66202 жыл бұрын
A good review. To sand a straight or flat surface I use a large sheet of abrasive placed on a flat glass plate and carefully move the part being sanded over that.
@HarryHoudiniModels2 жыл бұрын
You would still have trouble with over-sanding the very thin and soft edges of that deck. My sanding block is hard, flat and firm but it was already taking plastic off around the sprue join, not just the protruding stub.
@dave_jackson30432 жыл бұрын
Thanks for the review buddy, what a stunning kit packed with detail😁😉👍
@HarryHoudiniModels2 жыл бұрын
Glad you enjoyed it Dave... more to come with a comparison with Airfix and Revell kits on the weekend
@dave_jackson30432 жыл бұрын
@@HarryHoudiniModels that will be one to watch mate, thanks for taking the time out to do the vids👍😁😉
@HarryHoudiniModels2 жыл бұрын
My pleasure matey
@billevans79362 жыл бұрын
Hey i like the box art...cool....lots of boats Harry
@HarryHoudiniModels2 жыл бұрын
It is some nice artwork... the kit’s great too!
@davideaves5632 жыл бұрын
It does look rather spiffing! :)
@HarryHoudiniModels2 жыл бұрын
Spiffng is what I was aiming for!
@boomerharris29652 жыл бұрын
I've always wanted to do a Schnell Will be neat to know the best
@HarryHoudiniModels2 жыл бұрын
Well best will be relative to your skills, and knowledge of building boats. This kit is quite complex and will require a few other boats under your belt first to get the best results. The Revell kit is an easy build for anyone, but can be super detailed by an experienced modeller. Both will come up nicely and be a great display models.
@aussiefrenchman-hobbytable99602 жыл бұрын
Bonjour Harry, great kit mate , like the fact that torpedo tubes can be left open without having to do a whole lot of scratch building ! Also the choice of PE or not , thinking of getting one , looks like a lot of fun , tres manufique 😄😄😄😄😄 looking forward to comparison video 👏👏👏👏👏👏👏
@HarryHoudiniModels2 жыл бұрын
It does have so many clever and unique features, which give you scope to set the model up anyway you like, without needing to scratch build or buy any additional aftermarket.
@MGB-learning2 жыл бұрын
Great video and review.
@HarryHoudiniModels2 жыл бұрын
Glad you enjoyed it
@nickbrough83352 жыл бұрын
Its a very nice kit. It looks like they will release without the etch at some point as well. It'll be interesting to see you build it and expecially what camo pattern you choose !
@HarryHoudiniModels2 жыл бұрын
Thanks Nick. Going by other ship manufacturers from China, I doubt they would drop the PE. No advantage to them as the cost of making PE would be marginal in the long run, and they would be losing money to drop the price point on a non PE kit. Anyway, as I showed, you don’t need to use it.
@mikeslattery87152 жыл бұрын
Thank you for giving a heads up on very, Miniscule Tabs on the hull keel. I,have a very good friend who is opening up, his New Hobby shop here in Knox , Indiana. Hope I could get, that FORE kit from China. Have a great day Harry!☝️😉👌❗☝️
@HarryHoudiniModels2 жыл бұрын
It is a great kit Mike and should be available online. I found mine on eBay.
@mikeslattery87152 жыл бұрын
Thanks Harry, I'm am Shure I, will find it.😃👌💯%
@craigclark29362 жыл бұрын
Awesome review. Interesting historical note: While s-boots were able to carry a full compliment of six torpedoes, most did not as the time it took to reload wasn't compatible with hit-and-run tactics employed. So four or even just two is more normal. but not as badass.
@HarryHoudiniModels2 жыл бұрын
So you say I can shove half a dozen torpedoes on my boot!
@Emtbtoday2 жыл бұрын
Fore hmm always good to see more available! Good the torpedo hatches are opened up! I never thought I'd do another 1.72 again from revell but this FORE reminds me of Takom I might try find one sometime! 👍 i would suggest working on a revell one first for a beginner they won't want to touch another one again haha! we got an email in work yesterday Heller have brought out a 1.16 stug ausf G with the shurtzin and it says we don't have access to Das werk but stugs 1.16s are like Busses non for ages and they all come at the same time! Trumpeter have a new 1.16 coming to that I think it is the same kit as this new Heller kit but atleast that's 3 new 1.16 stugs this month haha!
@HarryHoudiniModels2 жыл бұрын
They all re-box each other these days... it’s inceistuous!
@HamilkarBarkasScaleModelling2 жыл бұрын
Very good kit review indeed Harry, the points about the rivets on the hull are interesting. Have you found anything about that by now?
@HarryHoudiniModels2 жыл бұрын
Thanks Michael. Yes we found the truth. Both my further research and with help from the community came up with evidence for riveting on the cover of the torpedo tubes. It was apparently made of mild steel / aluminium. Close up photos clearly show the rivets, but they are far more subtle than the kits moulding and certainly will not have panel shading or need to be picked out with a heavy pin wash. Like on fast aircraft, the rivets are mostly flush and when painted over are hardly seen. But yes, they were there as per Fore’s hull parts. Fore got it right, but the person who made the display model on the side of the kit box got it wrong.
@HamilkarBarkasScaleModelling2 жыл бұрын
@@HarryHoudiniModels Thank you for the info! I have two books on S boats somewhere, but i don´t recall anything about rivets in there :D Your info will be very helpful when i get to build my bunch of boats.
@HarryHoudiniModels2 жыл бұрын
Happy to share the information I’ve found. Just don’t ask me to count the rivets hehe :)
@iantait3092 жыл бұрын
@@HarryHoudiniModels Not even if we all said please!
@PanzermansBunker2 жыл бұрын
Good in box look at the new Schnellboot kit. Lots of nice detail. Will you add crew figures? Happy modeling. Bill
@HarryHoudiniModels2 жыл бұрын
I have a whole set of Kreigsmarine figures so I may use a few to man guns or Captain the bridge.
@thomasdailey92802 жыл бұрын
Hadn't heard of them either but it does look good .
@HarryHoudiniModels2 жыл бұрын
New kid out the block. Thanks for watching Thomas
@OzScalemodeling2 жыл бұрын
Nice review pointing out all the goods and no so goods. Where do you find these kit makers..Cheers mate 😉👍
@HarryHoudiniModels2 жыл бұрын
Thanks Matey... Bernard found this one on Evil Bay. Brand new maker from China
@dakel202 жыл бұрын
This has been on my "to buy" list for some time now... I think imma get it next pay period because of you *shakes fist* hah!
@HarryHoudiniModels2 жыл бұрын
It is a superb kit… did you see my 3 way comparison with the Revell S-100 and Airfix E-Boat?
@dakel202 жыл бұрын
@@HarryHoudiniModels Not yet, gonna watch that now!
@georgedistel12032 жыл бұрын
I feel you have just been voted schnellboot guru
@HarryHoudiniModels2 жыл бұрын
Ohmmmmm many patreons!
@usssaratogacv3lefevre9782 жыл бұрын
This Looks like a vey nice kit. Do you think that the owners of Fore are golfers? 😅😅😅
@HarryHoudiniModels2 жыл бұрын
I think they were trying to say their models were “in front” from the prefix “fore”. Just typical Asian use of an English word believing they know what it means, but yes, not understanding the golfing reference of “heads up” incoming!
@nikkibaugher24272 жыл бұрын
Oh my Waffle Friend...i have been waiting for this video. Good job!
@HarryHoudiniModels2 жыл бұрын
Happy you enjoyed it! More waffling to come.
@sammy_dog2 жыл бұрын
sorry Harry unlike your kit my comment must of been on the slow boat to China