That's exactly what a puukko should look like in my book. Congratulations. If I could own one, I would not hesitate.
@janvanoverdijk81162 жыл бұрын
Wha!! bijna te mooi om te gebruiken ... Awsome work ... Craftmanship !!!
@ryfra50193 жыл бұрын
That was incredible! As a fellow bladesmith, I say well done. It's too bad people have to feel good about giving a thumbs down to such a craftsman.
@rafatucholski11842 жыл бұрын
good work
@arkas67976 жыл бұрын
Because the good is not at all. Well done! Simple and beautiful.
@fabiomarchese86084 жыл бұрын
Really a good work, with iron, wood and leather!!!!
@torqueguy15 жыл бұрын
Cinderblocks! Cools slowly! Love it man, thank you!
@alexgloba9.905 жыл бұрын
Извини что без перевода) Получился хороший, добрый помошник. Мне понравился, когда нибудь сделаю себе такой же 👍👍👍💣💎
@timofeiolimp96983 жыл бұрын
Ну что сделал?
@michamaslak3 жыл бұрын
Dopiero znalazłem ten filmik... Piękny nóż.
@Sonnenstrahl_06 жыл бұрын
Wonderful. Today i received a Puukko! i love it!
@MLCustomKnives6 жыл бұрын
Nice! Maybe get your next one from me? (;
@bensartakamcas1n1266 жыл бұрын
That masterpiece is so Beautiful a tear dripped from my eye all I can say is *D A M N* *VERY AWESOME JOB MAN* *100/100*
@MLCustomKnives6 жыл бұрын
Haha! thank you!
@misiek25146 жыл бұрын
Knife beautiful . sheath for this amazing . You Are real Craftsman .
@MLCustomKnives6 жыл бұрын
Thanks!
@outdoorsweetheart4 жыл бұрын
so beautiful craft. Loved it so much. Wish i had that puukko with me right now. Keep it up.
@MakeNCreate6 жыл бұрын
Amazing! Beautiful sheath! Gonna have to try that method at some point. Cheers!
@MLCustomKnives6 жыл бұрын
Thanks! Good luck at trying it! Cheers!
@bigronxxxx6 жыл бұрын
You really did a amazing job on all parts of the building and filming,that knife if taken care of will last a lifetime,thank you for sharing your work,all the best to you and yours
@MLCustomKnives6 жыл бұрын
Thank you!
@raat99803 жыл бұрын
I don’t understand the dislikes ? Great job and and a beautiful result!
@FireCreekForge3 жыл бұрын
Nice lines on this.
6 жыл бұрын
Beautiful.
@SugarcreekForge4 жыл бұрын
Nice work. That was fun to watch!
@Woods_walker6 жыл бұрын
That was badass man keep it up !
@ИванРешет-я1ы3 жыл бұрын
потрясающая работа
@YooProjects5 жыл бұрын
Wow.. Amazing job!
@TheSlingshotKing6 жыл бұрын
Amazing work!
@MLCustomKnives6 жыл бұрын
Thanks!
@shane41765 жыл бұрын
That's awesome
@MLCustomKnives5 жыл бұрын
Thanks!
@timper77FIN6 жыл бұрын
👍Hienon näköinen.
@MLCustomKnives6 жыл бұрын
Kiitoksia!
@walterromano80224 жыл бұрын
Hermoso
@fishingpassion24123 жыл бұрын
😘😍😉👍
@Tony_Seed4 жыл бұрын
Awesome job on the knife, I couldn’t help but notice the song was like a slightly varied ripoff version of little lion man by Mumford and sons with no lyrics haha
@MLCustomKnives6 жыл бұрын
A huge thank you to everyone of my subscribers for 2000 subs!!
@AlexVBucur6 жыл бұрын
Very nice indeed ! Whats the HRC on your blades after tempering at 200C for two hours ?
@MLCustomKnives6 жыл бұрын
Thanks! I don't have a rockwell measure due to my low budget but it should be 60hrc, or that's what the 80CrV2 tempering chart says. With puukkos I usually aim between 60 and 61hrc
@AlexVBucur6 жыл бұрын
A friend of mine ( knife maker ) said that after quenching a 3.2 mm blade , you can acheive a 58/59 hrc by tempering the blade in a oven for one hour at 200 C. the blade has a blue-ish color after tempering. I know that blue means high hardness around 61-62 hrc. Any thoughts ? He tested the blade on a rockwell measure a year ago.
@MLCustomKnives6 жыл бұрын
Hardness after tempering depends on what steel you are using so do you know what steel he used? with common knife steels blue often means something like 56-58hrc which often is too soft for a knife to hold an edge very well. 200c for 1 hour should leave the hardness to a little over 60 hrc but again, it depends on the steel you use. The blade should be straw/light straw color after 1hour in 200c so are you sure it was 200c? about 250c or maybe a little less or more should make make the steel blue-ish color but this also depends on how clean the steel surface is.
@AlexVBucur6 жыл бұрын
He used 80crv2 3.2 mm. That's what he said 1 hour at 200c. Maybe with his current tools can not achieve a full hardness after quenching... I don't know. Any way thank you very much for the info. Keep up the good work.
@arndegothia14126 жыл бұрын
I see you got a product from Biltema, do you perhaps like their sausage as well? Beautiful knife!
@MLCustomKnives6 жыл бұрын
Thanks! Yeah another one of my belt sanders is from biltema. Tip: do not ever by that belt sander it is probably as bad as a belt sander can be and it just broke a week or two ago. But what do you mean with the sausage? I have visited biltema dozens of times and never seen them selling sausages there.
@phogelbice5 жыл бұрын
@@MLCustomKnives biltema körv
@lukassior5 жыл бұрын
nice blade and sheath, but handle should be made of better wood something darker
@bnktopa6 жыл бұрын
Terve! Paljonko pyytäisit ihan normaalista puukosta tupen kanssa? Normaalilla tarkoitan "ei niin erikoista" esimerkkinä vaikka fulltang puukko.
@MLCustomKnives6 жыл бұрын
Terve! Yksinkertanen fulltang veitsi tupen kanssa yksinkertasilla materiaaleilla olis varmaankin sellanen 140-200€ Mulla on nettisivut joista ilmotankin kaikille tilaajille muutaman päivän päästä: www.mlcustomknives.wordpress.com Tarkemman hinnan osaan sanoa kun tiiän tarkallee millasen veitsen tilaisit. Ja sitten jos hinta ei aivan sovi niin se on toki neuvoteltavissa.
@paulie4x16 жыл бұрын
Say Heah, Viva LA Puulku.,,.p
@oma_x75085 жыл бұрын
Tell me please, what are the characteristics of this knife, I want to make one.
@MLCustomKnives5 жыл бұрын
Sorry for a late reply but the spine is 4-5mm thick, blade is 90mm long, handle is 105mm, bevel is ground to zero and then added a very little secondary bevel and blade hardness is about 60-61hrc. Anything else you wanna know?
@unconventional_health6 жыл бұрын
Hey man I responded to to message, don't know if you got it but nice graphic and see you changed your YT name.
@MLCustomKnives6 жыл бұрын
Yeah I got it now and responded back.
@mikikeskinen27166 жыл бұрын
Missä sä teet näitä puukkoja?😇
@MLCustomKnives6 жыл бұрын
Kotona kellarissa pannuhuoneessa.
@unconventional_health6 жыл бұрын
Hey North Weapons, did you get my message?
@MLCustomKnives6 жыл бұрын
Yes i got it i replied to you yesterday
@user-dc8do7fo4u3 жыл бұрын
👍🔪🔪🔪👍
@maawmaopa63162 жыл бұрын
The video is very dark..
@homemadehistory75376 жыл бұрын
realy good and beautyful work!!! The kife sheath is perfekt. My viking knife projekt is nearly done. Maybe you like to check on my channel too. What kind of grease do you use at the end ? beeswax ?
@MLCustomKnives6 жыл бұрын
Thanks! It's some kind of grease for leather which includes beeswax.