Forging an integral Damascus kitchen knife

[@OldHickoryForge]

facebook.com/FieryFurnaceForge/ forgot to put the power hammer link in the description

[@Chevelle_addict]

You need shirts that say" There's nothing to it, really"

[@CountryRoadVaping]

It came out beautiful, Congratulations Joseph !!

[@SSsaucy]

Wreck it Ralph your finally back!! Lol

[@MaxPowerCrafts]

Weather wise in nc, I drive on the road that had the car upside down and on fire from a decent while back now. We still bring it up every time it snows like last weekend. Knife wise, real good work!

[@markspc1]

Good looking knife.

[@NeilGraham.I.M.F]

Long time no see. What a beautiful knife John! Glad to see things are going well, and i see you're really taking to the new shop. Thats great!!

[@richardzago5562]

Nice work and thanks for sharing knowledge

[@drstrangefart]

The Super Glue finish ALSO makes for incredibly durable wood. I used it on all of the wood pens I turned and they could take an insane beating with nothing more than a chipped finish. One pen took ALL of my weight on the corner of a brand new brick wall when I jumped up to sit on it. Dinged finish nothing more. Bocote is one of my favorite exotics, along with Zebrawood.

[@xboxhuegable]

“Nothin to it really” while displaying elite level craftsmanship lol. Nice build.

[@ShootingUtah]

for the fit between the wood and your integral bolster, I like to put a thin piece of copper plate in there. It's a soft enough metal that it really helps to fill in any small gaps and adds a little accent too. It significantly reduced the time it took me to get a good fit on the knives I've made. Awesome looking knife!

[@LtDan-tr6qc]

In spite of the reassurance. I believe there might be more to it really. But great knife as always

[@Pmedic605]

I really enjoy your videos! Just an FYI, ice is a problem for northerners too.

[@G19amc]

When you get to making tools for the PH, please show.. I have the same hammer, needed it after my double stroke just after I retired from the service and now I can barely swing a hammer.

[@rickward4384]

awesome looking knife. Suggestion, you need a blade vise...make a good vid

[@WMCUTLERYUSA]

Hello,my name is john,& I run WMCUTLERY USA in pa. I've been watching the videos that you make a lot & it's really helped me in my journey as a knife maker, I can't thank you enough 👍

[@WMCUTLERYUSA]

Love the knives you make, just beautiful man 👍

[@mattbrown5511]

Gorgeous piece and outstanding craftmanship.

[@skoitch]

Beautiful knife, I like to build them with a leather spacer. Looks great and I don’t have to worry about gaps at all

[@jpalloutdoors3441]

Nice

[@rodgerklindt3165]

Good to see you back, great build. Bocote is one of my go-to woods. Hope you can get out soon,,-13 right now in northern NY.

[@peewee11B]

Good to see you back in the shop

[@SchysCraftCo.]

Very nice job turned out very well. Hopefully this future owner loves it and gets great use out of it my friend for many years to come. Keep up the great craftsmanship and hard work my friend. Forge on. Keep making. God bless.

[@charliecatron5367]

Beautiful knife. Great to see you back again. Always look forward to seeing your videos.

[@linusandersson8920]

Nothing to it really 😁 awesome job and great forging tips!

[@jennifermance9387]

Took a shot every time John said "Nothing to it really" I'm f*cked up! Jk... Beautiful knife! 😍

[@supermannyg3]

That looks great. Well done.

[@mannsdan]

i don't know what I admire more, your blacksmithing skills or your biceps...

[@ThecrazyScotsman]

That is one slick knife my friend great job

[@robertwhitney2232]

Hi John, nice looking knife. Ice and snow can last 6 months, in Michigan it's just a way of life. Mother Nature makes an exception for you now and then, but ice puts the skids to everyone, no matter where you live. If you don't have to travel, stay home. Take care, and thanks for sharing. 👍🔥⚒

[@przemysawrozycki3107]

Dude i want one now, if you wanna do one for me just tell me the price. I admire your work, actuall problem solving and chill when stuff happends

[@TooTall553]

Outstanding video John love the taper love the flex, great Knife stay dry and out of the Snow. Not something we have To handle in sunny Southern California 😎 ✌🤙

[@bearfootknivesgunforge9183]

She came out nice John. Becote wood really compliments Damascus.

[@Fishy1764]

Ive watched this particular build about six times and absolutely loved it .You turned out a really nice knife and ive learned a few things too. I suppose ill have to have ago at one now .As ive never made an integral knife or my own damascus .so wish me luck lol! All the best mate.😊👍

[@seancoleman5483]

Awesome work man! Fun drinking game: Everytime he says "nothing to it really", take a shot. 🤣🤣

[@brettjones2340]

Do u have a link for your hydrolic press please?

[@SonoraSlinger]

My fav. Part of fjorging is having my tang hole broached out 👽⚒️🔥🗡️

[@MBishopsBlades]

Dude, with guns like that you don't need a power hammer! God gave you your very own. :) Good looking knife!

[@patw999]

Ok look I ground half my knuckle off, nothing to it really, you’ve seen that ,before, lol.

[@Cherokie89]

You should make Old Hickory Forge t-shirts that say "Nothing to it, really."

[@ukrainiak2592]

Just letting you know, if you had shirts that said "There's nothing to it really" I would buy one.

[@dalekidd420]

That's a helluva nice knife, John. Joseph is one lucky bugger. The new shop is lookin' good. Could you perhaps take a few minutes in an upcoming video to give us more details on that little power hammer you've acquired? (More interested in your perspective and observations than on the specs etc., which I can find on their site.)

[@thepettyforge9082]

Even though I've seen it a hundred times I would still like you make the damascus.

[@mikemeinders6717]

Looks great John thanks for super glue tip I will try it on my next blade

[@jamesbarisitz4794]

That's a beauty. The S grind makes that chef look like a feather .

[@mickeygirse3458]

Awesome lookin kitchen knife. Great job man.

[@thehumblehearth]

Love your work. Made good use of my rounding hammer this Summer and Fall working in the forge at a museum. The June 2019 charity build axe is also holding up great

[@bjf10]

What a beautiful knife! I'm sad I didn't win this one. 🙂

[@elijahmcgeorge5198]

It’s been a while since your last video I made my first Damascus since then and this is one beautiful knife nice work

[@BATNC]

As a bonus, bocote smells delicious (not that we should know this)

[@threehammers2516]

Beautiful! Nothin to it really!

[@DUKWAK]

That’s a handsome knife, sir.

[@mikeknowland4815]

Really like your beard and videos

[@aidenonfire]

Love your work. Nothin to it really 👌

[@pennell20]

Hey John. First off, beautiful knife. I'm also a blacksmith (beginner) in Claremont. Where did you get the broach tool to carve out the handle for the tang?

[@OldHickoryForge]

Pops knife supply I think. Just Google "hidden tang handle broach" you'll find it

[@bhardmanaz]

Hey John, love your videos. what thickness did you forge your bolster to? I am trying my first integral kitchen knife now as well, but think I didn't give myself enough material. thanks again for your videos. Keep it up brother

[@OldHickoryForge]

About 3/4" square

[@erikcourtney1834]

Whoa, when did you get a power hammer, feel like I missed or forgot the introduction. KZbin is basically the only “social media” I mess with anymore, so yeah if it was posted on another site I didn’t see it. It’s been a long time, good to see an update from the channel. Great looking knife John.

[@erikcourtney1834]

Well I should have continued the video before I asked🤦‍♂️. I do that a lot for some reason

[@McGowanForge]

That super glue trick really helped, Ive put it on all my knives so far and just like you said it stays that polished look without fading, I'm really enjoying it, thanks man!

[@yax75]

Man you are a beast at moving metal.

[@ForgedInHolland]

Nice, a new video!

[@dski8097]

Very nice, great work bro.

[@Gooseyboi403]

OOOOOOOOOOOOOHHHHHHHHHHHHHH

[@Labrador_Forge]

Beautiful work!

[@scrobeaa]

Thanks for sharing

[@jonnybkuehl878]

Beautiful knife!!

[@ClenioBuilder]

👏👏👏👏

[@JGV_IX]

Gorgeous work!

[@shakesforge]

Looks great.

[@ajcsonsforge6370]

Great video

[@xletsgooutx]

Nothing to it

[@bjf10]

I think you forgot the link to the power hammer.

[@OldHickoryForge]

Fixed 💪🏻

[@OhioCruffler]

If someone wanted to commission a piece like this, what would it cost? That's a lot of hours just sanding and filing. But what a beauty!

[@OldHickoryForge]

I actually personally don't do commission work. But I know plenty of excellent smiths I could refer you to

[@OhioCruffler]

@@OldHickoryForge Bummer; that one was really sweet. Do you feel comfortable dropping a name or (better) a link here?

[@wardigger36]

Great!

[@jamesball7322]

Dave is a great maker of all his tools so good for you to finally get you a hammer ,oh and man I love some random pattern

[@KageStelhman]

Been awhile since your last upload, welcome back. In any case next time you do a kitchen knife I would make a custom Platen for your grinder (50 or 60" Radius Minimum) for striking in your Fuller/"S" Grind and hold the knife reverse (Spine Up) of what you normally would as it will give you a bit more control. Other than that Nicely done, that pattern is awesome

[@brysonalden5414]

Nice work, sir! Appreciate your including the flaws you perceived in your work; that's the only way I get any better, painful though it can be.

[@robinschlyter309]

Too bad you can only like a video once. Very pretty knife and that flex of the blade is impressive! As someone who lives in a cold country, we and the government both seems surprised when the snow comes every year.

[@MadebyKourmoulis]

Have you ever thought about doing live streaming? That way you could add content without all the hard work of making content. I just duplicated your flatter you did by hand. I made a short and uploaded a video of it.

[@StrayWolfForge]

That is a very nice knife! Thanks for taking all the extra time and hassle to film your process. I always learn alot from your videos.

[@Forging403]

Dam sir that's one of your best knives. Please keep up the videos. Thank you.

[@jesuslovesme9138]

Beautiful finished product! Thanks for taking the time to make a new video for us here in KZbin land! We really appreciate you!!

[@Curtislow2]

Long time follower of your channel. Great to see you post a nice kitchen knife build John. Keep up the good work.

[@bjornronaldson6017]

Gorgeous knife and beautiful flex to that blade!

[@mjoe877]

Beautiful work and love the hammer!

[@FilthyFishinFreak]

Great job John I love the way it turned out

[@willlothridge3197]

Looks great!

[@justin_ray]

Good looking knife. Something appears to have bit your hand when you went to grind the handle.

[@OldHickoryForge]

Yeah one of my 36 grit belts broke and gave my hand a good smack while working on another project.

[@JH_HAY]

Ouch!

[@CalebStewartPhoto]

excited to get my hammer, take your time

[@mikeknowland4815]

First