Forgotten Air-Cooled V4 Engine in a Motorcycle | Final

  Рет қаралды 3,068

V4 MODE

V4 MODE

Күн бұрын

Пікірлер: 23
@unclebrentsshed4253
@unclebrentsshed4253 2 күн бұрын
This engine is awesome , nothing like this in Australia
@v4cus
@v4cus 2 күн бұрын
I would even say, nothing like this in the entire world. We're entering an era of turbocharged R3 engines which are being overclocked with small turbos up to 150 hp. Engines are getting to be bored Thank you for your comment!
@unclebrentsshed4253
@unclebrentsshed4253 2 күн бұрын
@ no problem 👌🏽
@albertoanduze6885
@albertoanduze6885 5 күн бұрын
This motor is fantastic
@v4cus
@v4cus 5 күн бұрын
Can't agree more! It's definitely not the best engine in the world, but it has its own character.
@cerealtiller
@cerealtiller 7 күн бұрын
Fascinating Video ..good to see such Resourcefulness...I bet you enjoyed it..
@v4cus
@v4cus 7 күн бұрын
Thank you, Peter!! We really enjoyed it, but looking back we see that we could have done many things much better, though we had very basic tools back then.
@cerealtiller
@cerealtiller 7 күн бұрын
@@v4cus Basic Tools maybe...but Excellent Ingenuity..Keep it going ..
@v4cus
@v4cus 7 күн бұрын
We cannot tell you enough how we appreciate your words 🤝
@karlalton3170
@karlalton3170 7 күн бұрын
Wow bit of bad luck on the cylinder head , but at least you got it sorted good job 😎😎🤘🤘
@v4cus
@v4cus 7 күн бұрын
Yeeeah!! The only thing I regret is that it wasn't filmed on camera 🫣 that would have been an epic shot! We didn't expect this turn :))
@kelleyhaney-cw7mk
@kelleyhaney-cw7mk 6 күн бұрын
When you stick ark weld aluminum you have to pre heat it to 750 degrees farihiat to get a good weld 😮❤
@v4cus
@v4cus 6 күн бұрын
Thank you! Actually we heated the parts slightly, I just forgot to mention this. But I'm not sure if it was enough 🤷
@kelleyhaney-cw7mk
@kelleyhaney-cw7mk 6 күн бұрын
They make a marking pen kinda like a sharpie and when the aluminum gets to the right temperature it changes color, but when you have enough experience welding it, you will notice the change in the aluminum when it just starts to shine just before the melting point!
@bobg3034
@bobg3034 5 күн бұрын
Need to add locating dowel pins to the new oil pump.
@v4cus
@v4cus 5 күн бұрын
yeah, we did it 🤝
@mickeysuta5459
@mickeysuta5459 5 күн бұрын
Nice Job! 👍
@v4cus
@v4cus 5 күн бұрын
Thank you! 🙏🏻
@marcellebaudry5786
@marcellebaudry5786 5 күн бұрын
bravo cool
@v4cus
@v4cus 5 күн бұрын
Thanks!!
@aspopulvera9130
@aspopulvera9130 6 күн бұрын
so in the end there's actually a v4 engine but was never took off
@kelleyhaney-cw7mk
@kelleyhaney-cw7mk 6 күн бұрын
If you think like a criminal it means you are a criminal 😮!!?!?)
@v4cus
@v4cus 6 күн бұрын
Concerning car wiring harness - that's for sure! :)
AIR COOLED vs OIL cooled vs WATER cooled ENGINES
14:07
driving 4 answers
Рет қаралды 379 М.
Forgotten Air-Cooled V4 Engine in a Motorcycle | Part 1
13:09
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
The Ultimate BMW R60/5 Restoration: 50 Year Old Masterpiece
30:54
Workshop Rebuild
Рет қаралды 130 М.
The Scotch Yoke Engine is Alive! 8 Pistons, 4 Rods
21:49
driving 4 answers
Рет қаралды 1,3 МЛН
Building a  Motorcycle Gas Tank from Scratch
49:26
Classic Road Racing Shed
Рет қаралды 42 М.
I Bought a Brand New 1975 British Motorcycle(Rare)
30:40
Bikes and Beards
Рет қаралды 4,1 МЛН
I Put My Homemade Two-Stroke Engine on a Bike
16:28
Camden Bowen
Рет қаралды 883 М.
I Found 2 Old Motorcycles in a Shed! Will They Run Again?
29:00
The Bearded Mechanic
Рет қаралды 192 М.
Rotary Valves Make Normal Valves Look Silly - Why Aren't We Using Them?
17:14
driving 4 answers
Рет қаралды 2,5 МЛН
REBUILDING A BMW AIRHEAD ENGINE IN 30MINUTES
29:54
Workshop Rebuild
Рет қаралды 1,1 МЛН
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН