Forgotten For 3 YEARS, The OG Cummins Tow Rig Rebuild Begins!

TheBoostedBoiz.com

[@swashed.]

loving the double lav mic setup, its hilarious hearing both perspectives during the tow

[@au1317]

I'm also loving the upgrade in audio but I just wish they'd find a better position than the mic pointed away from him on the bill of his hat. The sensitivity has to get turned up so much to hear him that there's a lot of noise.

[@Grant82gc]

Audio nerds unite!!! In all seriousness, audio makes and breaks KZbin channels but it's always neglected so much.

[@MrChicken420]

Yeah could be good the quality is just terrible

[@Moonpoints]

@@au1317I agree, needs to be on their shirts like every other person usually does.

[@swashed.]

@@au1317 completely agree

[@CoffeeCaffiend82]

Should do a compound turbo setup on the Cummins.

[@MrHeisenb3rg]

Would love to see that

[@sneezinhatch]

I agree but with a 12 valve or 24

[@SeventhCircle77]

Even if it's compound over stock would be nice

[@RadDadisRad]

Oh yeah 650-800hp and 1500 torque. Make it a tow pig.

[@RadDadisRad]

@@sneezinhatchit is a 24v already…

[@MelanthaStr]

"Those ants are all hopped up on twisted tea. Who knows what they're capable of." - Goddamnit Kyle. You are a Florida Man, no doubt.

[@wesleywaite1294]

Fix it up all nice nice.......Christmas present for Brent! Always remember your roots!

[@Twitchavvej]

Already 3 years? Dang, time just flies by!

[@boetab9221]

was my exact thought when i saw the title

[@petersonspecial]

Right

[@Ada-zn3pw]

Damn right it does. Crazy

[@Andrewscorner]

It's the only thing I don't like about adulthood. It's going by too fast

[@HeresMinx]

covid forced the last 4 years by like it was nothing

[@alanpetrosky]

1000hp cummins build?! 👀 PLEASE thats what im building now and would love to see yall build one!

[@msba1228]

😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

[@Reconbeatz509]

That lawn mower is amazing. Best vehicle in the channel

[@nicktasic9055]

Such a beautiful color on the rig and its look so clean . No rust at all . Definitely bring her back for sure 😊

[@justin169169]

Make sure the blower fan is off until all the vents get cleaned and you install a new cabin filter. Airborne mold spores are not ideal haha

[@TheGovIsTryingToTakeOurSouls42]

The double mic setup is absolutely hilarious. Ten out of ten recommend doing again

[@AustinK95]

I've been waiting for this to make a come back excited about this build.

[@williamburton8163]

"I got ants in my Crocs" hahaha

[@iNegroTv]

The Florida man version of "There's a snake in my boot"

[@theglitch99]

Grown men wearing crocks drives me crazy. Stopped watching Jh diesel because of it....😂

[@iNegroTv]

@@theglitch99 Grown men worrying about other MENS fashion choices....Yikes!

[@BaldHeadedManc]

​@@theglitch99Yew b gays

[@michaeljohnston6856]

happened to me too today

[@Locomakes]

The Cummins Cyber Truck would be hilarious

[@920.streetstyle]

Someone tried that before and the EPA got them, so probably not a good idea

[@jaynikk758]

No, compound turbo setup

[@user-so7uw5no5z]

Now a Cummins swapped cyber truck would be something I would drive

[@huerosantos7563]

​@@user-so7uw5no5zYuuup lol

[@Timrsnakess]

I’m hoping for a swap too. The EPA didn’t actually stop Rich Rebuilds from swapping his Tesla /The Drive did an article on it, they definitely couldn’t stop anyone now

[@therealjplavoie]

2 things i retain from this video. 1 love that you guys are mic'ed up.( We need this more often) 2 you need some type of ATV/sxs/ golf cart as a push/pull mule! Great content as always boys!! 🤘

[@goosenotmaverick1156]

Dont they still have a smart car somewhere they were using like that for the MR2? Not that it would have done any better in this situation, but I do think they have it.

[@anthonysandoval456]

Been waiting for the rebuild!!!!! I remember watching the video when it went down and now it’s finally going to be up and running! Hell yea brother 🫡

[@EminemLovesGrapes]

Loving the variety, some peopel might hate to see another project neglected but I love seeing you bounce to and fro various stuff.

[@AustinK95]

Just want to say i love the mic upgrade to hear you and wyatt banter back and forth lmfao dying 😂😂 if you agree smash the likes so kyle knows we appreciate the updates and will get this pinned 🤘🏻🤘🏻

[@xCJEx360x]

Kyle, ive been watching this channel since we were all kids, this month of frequent uploads has been so much fun! really makes me feel like im 18 again watching you boost the hatch and wago, make your first intercooler, losing trouser in the van frame, spending time with the guys at PFI. Ive loved every minute of content youve uploaded since back then, but these videos today feel special! You and Wyatt being mic'd up is hilarious btw, and im so happy we can all share this together. Thank you guys so much for doing what you do and sharing it with us. Someday i hope to meet you guys at an event and thank you properly. I was a kid washing cars when this all started, im now a master mechanic at a Honda dealer. Many of my lunch breaks and hardest days were spent with all of you guys. Thank you all for everything!

[@JolineDecomo]

*No man is too rich til you leave the earth you leave with nothing*

[@YambaoDebien]

well at least the rich achieved something in life before that person dies. his kids will probably inherit the fortunes and pass on to the next generation. cycle of life.

[@BoyesMorlas]

true.but.i.wont.die.poor

[@IshiharaCrowl]

We live in this earth, we gotta play our part...He's living life while he is still alive...

[@MichaelRitter-z2c]

Yeah got to play your part start early with diversified investments in stocks, bonds, and real estate. Maximize contributions to tax-advantaged accounts like 401(k)s and IRAs. Regularly review and adjust your strategy to ensure security.

[@TrowerMatsushita]

People dont understand that the prices of things are never going back down. This inflation is deeper than we think. Those buying groceries are well aware that the real inflation is much over 10%. The increments dont match our income, yet certain investors still earn over $365,000 in stocks and assets. Wish I could accomplish that.

[@CudMcCuddles]

Time to call Deboss for a colab lol

[@georgem.6136]

Can't believe it's been 3 years, wow, time fly's! Time to bring it back to life for sure!

[@glennwilck5459]

That's a really nice truck to just have sitting there good on you for fixing it up!

[@mopar513]

Brother, thanks for all of the uploads lately . You dont know how much they really help some of us...

[@evelkoloski]

keep yer stick on the ice @mopar513 ! yall aint alone.

[@ebp609si]

Oh man, I’m loving the consistent uploads!!

[@hallvarguttormsen3655]

Back to the old boosted boiz style with almost daily vids, love it

[@wayneb331]

I forgot how good lookin the ole tow rig is. Nice change up fellas. I was worried we would be stuck with kilowatt Kyle and Wyatt watts.

[@ej8_leo]

Def would be awesome to rebuild do a crazy setup and have this truck do the local to semi local work to keep some miles off that beautiful 550🥹

[@MGAFFY]

Hell yeah I've been wondering when this would be pulled out of its grave. Also personally I'd have a professional detailer do a full decontamination on the interior

[@g32k]

Have too that mold will keep coming back

[@MGAFFY]

@@g32k 100%

[@welz2002]

Mics are a cool addition! 👍🏻

[@highheatmikey]

When you find out the thrusts are gone in the engine, make sure you order a quality billet converter for it before you put it back together. The converters like to ballon and take out the crank on those. Other than that and some emissions stuff, those engines are bulletproof.

[@chriskron2512]

Loving the boosted month of freedom over here on this channel !! Thanks Guys!! Keep pushing this is AWESOME with all the content!! and Hondaru too??? WHAT???? So Kick Ass!!

[@Tsitris46]

You guys should get a 4wheeler with all the pushing and pulling of cars you do! A little shop mule. Thats a nice truck!

[@daverupes7022]

Nice! Better off rebuilding the older ones than a new one with all the emissions and computer issues

[@Ada-zn3pw]

that's a nice looking truck. I definitely remember all the flywheel trouble you used to have with it.

[@justinshamburger2701]

Pulling the cab is 100 % the move on this, makes life si much easier and takes less than an hour

[@FangOfTruth]

3:38 I’m thinking Cleetus has a TRX engine sitting around. I’m guessing he has it pulled out of the short bus TRX by now.

[@briantalmage2041]

Dam that is way better than my suggestion to build a gen 2 360 Cummins. That would be a very very spicy build!

[@miguelcruz5814]

Get that thing running, she deserves it for being a kick starter of the channel

[@iwikeu]

Love all the extra videos. You all could push a broom and chit chat and were here for it.

[@richardbermudez3207]

Man yall have been killing it with the videos lately! Loving the mix of different vehicles you’re bringing back from the graveyard 🤙🏼

[@emmanuellopez5037]

Dang i remember these times, your come along way brother!!! Congrats and keep pushing these awesome and informative videos!

[@kzarnold3678]

Lol I started to rock my body back and forth to help you guys out with moving the Dodge.😅

[@matthewf1979]

It's always good to have a spare rig in the fleet. I hope you guys build up the new engine to handle some decent power. Make it as reliable as you can and use the hell out of it.

[@bangthemgears9999]

Hell yeah the old school ending video is back!! Good old days 💪🏼

[@foxyaco]

FINALLY THIS IS WHAT I BEEN WAITING FOR THIS TRUCK TO GET A LIFE AGAIN

[@geniferteal4178]

That's the limit of my automatic transmission knowledge. If it don't go nowhere, check the fluid level. Saved me once beyond that I have no idea 😅

[@jasonhill390]

I’m down for some diesel content seeing how I work on peterbilts all day. The isb is pretty easy to overhaul. You guys shouldn’t have any issues getting it done

[@Takingbacksun06094GT]

This was a pretty funny episode, definitely had a few chuckles. Like when Wyatt was hozing you down 😂😂

[@Quake_Masta]

Jeez I can't believe it's been 3 years already. Seems like it just happened.

[@chadillacinc]

Time flies

[@josephgaribaldi2462]

Best tow rig I’ve seen in this video is the John Deere mower. 😂

[@Cody450sx]

I love the retro outro!!! I miss the retro intro too!! Brent hanging out the sunroof in the 24hr integra!

[@jacobmonroe3918]

No doubt in my mind that this Is the best og channel left! One of the best videos I've watched from anyone in a while! Keep it guys!

[@gutserker]

Ah dang, I was hoping for a K-swap. Maybe some day. I bet a K-swap video will blow up on the internet, pissing off a lot of people. "Horsepower is for speed, torque is what gets stuff done." *Wheel* torque is what gets stuff done.

[@coliimusic]

A 2J might be fun for one of those, more displacement for a bigger vehicle, 6 cylinder to 6 cylinder

[@gutserker]

​@@coliimusic do I think that a 2J would be a better comparable engine swap? Absolutely. Larger displacement, more cylinders, more consistent torque at low RPM. But a k swap I think is a perfect experiment for the argument of small displacement, high RPM, low torque engines can't do the job. Also k24 are much cheaper than a 2J for experiments

[@Harry_Gersack]

You could also put a 50cc two stroke in it if the gearing is low enough. Exactly the same principle. What's the point though? Sure it pisses a lot of people off, so he gets views. But that's a one time thing, after that he can't race it and it's impractical for towing. (Unless he puts a 30-speed transmission in it, but it would still burn tons of gas while towing)

[@gutserker]

@@Harry_Gersack if it's not something worth getting viewers, then might as well just go diesel. I'm sure a 2J would get good looks, I just don't think as many. Look up "8 turbo V8". Same idea. It even got an article in jalopnik

[@goosenotmaverick1156]

If you like the idea of small displacement engines pushing full sized cars... Go check out "Robot Cantina" currently Jimbo is working on a Honda insight with a Kubota 3 cylinder engine with a supercharger. Previously the insight had a predator engine, and the Kubota was shoved in an old Saturn for a bit too 😂 He's entertaining and goes into reasonable depth on what he builds.

[@TioDave]

It would be pretty cool to see the Edison Motors swap to diesel electric on the old cummins. That's another big project, but would be some good content.

[@3wheelslifelonglivetheatc559]

No that's just stupid a Cummins build is way cooler and better than a vacuum cleaner motor no one ever said your electric car or truck is cool just saying

[@TioDave]

Don't get all emotional on me bud.

[@kylewise3111]

​@@3wheelslifelonglivetheatc559it's a hybrid not full electric FYI. I don't care about most electric stuff, but the Edison Motors setup is definitely worth checking out

[@IceBergGeo]

​@@3wheelslifelonglivetheatc559it would still have a Cummins in it. Just an electric drivetrain. Although, this one is in decent shape and doesn't need that.. yet...

[@Harry_Gersack]

@@TioDave I think you really hurt that guy's feelings lol. what a pus$y 😂 btw I think their kit isn't even close to be a product? at least I haven't seen the prototype yet that deboss want to build. afaik that's going to be the first step

[@neo1231]

3:25 explaining your typical canadian winter 😅

[@gassybuds9240]

Thanks, Kyle. Love the grind. I don't miss a single video.

[@fampic7133]

About damn time... you hired a diesel mechanic and only let him work on hondas 😂 also buy Wyatt a bigger shed!

[@xjmg007]

People don't understand how cold Texas can get. It's not just the temperature it's the wind. Especially in the Pan Handle and west Texas. Every year, we have to deal with northerners mocking us for being fragile over winters.

[@phiillzzz807]

*Laughs in Canadian* -20 is cold though for a place that reaches 115 regularly in the summer.. Although its a hot, our Canadian summers make it seem we're in an oven being roasted with all the humidity, especially in ontario by the big 3 (lakes) that even worsen the humidity... 90F heat but feels like 120...

[@gavinausten1825]

I know this is crazy thinking but.......vehicles like this have a soul and deserve to be brought back to life......six billion million likes!!!!

[@Korruptionen]

I've been hoping for 3 years you'd rebuild it and give it away. Always loved this truck!

[@Harry_Gersack]

Alman?

[@CarsAndChicks]

Day 298 bring back the Honda prelude and I hope everyone is having a amazing day

[@LordofGggs]

Keep it going bro

[@marvinvisser5039]

The Cummins will be swapped on the cybertruck 😛

[@chrisbroyles2941]

yuuup😂

[@berryrijnbeek5938]

And having 2 trucks with out a engine.......

[@yourupdates1]

started watching when those clapped civics were being built, happy to see where you've come and respect to your past

[@jacobheinkel8128]

Mr Sam's interior cleaner cleans that mold right up!

[@chadbrooks9763]

Video 3 of asking what happened to the carbon fiber rear deck lid your buddy made for the MR2 last year before world cup

[@kbaifa]

And looks like video 3 of this dude not knowing you so he ain’t gonna tell ya. God this comment section is possessive and weird. Go get a friend Jesus

[@pilot554]

I think he mentioned it in one of the videos with mr2 long time ago but not sure which one.

[@chadbrooks9763]

@pilot554 I was wondering if I missed it when I was on nightshift, life got crazy and I missed a lot.

[@pressinpickle345]

The dodge is the best vehicle in this channel.

[@gotthumbs2235]

Great change of pace in the content and really stoked to see the work on this. I would HIGHLY recommend you install a new Harmonic Balancer from Fluidampr. I installed one on my Cummins 5.9 and it makes a huge difference related to eliminating vibration and engine rev up. Super responsive results IMO

[@evopwrmods]

Yall are killing on content... a very nice variety pack. Much appreciated...

[@7SUK1]

Cyber Ram?

[@Jessejames-hb2ty]

Please don’t Tesla swap the dodge

[@pizzasmitty505]

Don't listen to this guy do it!!!!!!

[@jaynikk758]

W profile pic

[@destructionfun2]

We'd be mining boomer salt for Y E A R S if they did that.

[@Jessejames-hb2ty]

@@jaynikk758 thank you sir 🇺🇸🦅

[@sparkles-s14]

​@@Jessejames-hb2tysupport trump but not diesel ev. Shame on you. Trump would be ashamed.

[@superconscious.]

Loving the vibe between you guys 👌Content is really enjoyable.

[@chrisdemario2636]

Dang I remember seeing that video. I didn't realize that was 3 years ago. Can't wait to see where y'all go with this truck.

[@Memry-dq7ug]

Not sure why y’all put your mics on your hats the audio sounds like poo when you do that.🤷🏼‍♀️

[@mikecrystalrobert7898]

When u speak it smells like poo💩

[@Wiiswis]

Sell the fan boat

[@DarkEclipse223]

He ain't going to sell it because it's a work in progress project

[@turbo3sgte770]

I'm pretty sure Mr Sam's cleaning supplies would love to help you out with your truck go over cleetus McFarland Cam and pick up some lmfao 😂

[@taistelija86]

Thats one impressive lawn mower you got there

[@jdm95subaru18]

Love when everyone is mic'd up its so much better. And Wyatt talk like bubbles from trailer park boys 😅

[@mixxedboyybuilds8273]

Thought I was the only one that caught that lol

[@michaelpotts3685]

Damn time flies. I still remember the video you showed pulling it up on the trailer. Pretty excited to see how she turns out

[@Ajay-hb1rc]

I've seen a couple of the videos over the years. I was originally drawn in by the MR2 world record. The stuff you guys do is insane! Especially the plaidessy project, that was so fkn awesome. Love the hard work y'all do. Watching this vid, I had no clue about this truck and the whole backstory. So sorry for the breakdowns man, I really empathize with you on that. Hope you can breathe new life into this ol beast and create some more good memories! :)

[@yeeto_bandito]

My 2001 f150 sat for about 4 years. New battery and brake clean made it start right up. Sold it and bought a 2018 ram a couple months ago. Miss that truck

[@stevegoodwin9067]

Love the videography vibe and the stories with you and Wyatt

[@pilot554]

That mower is solid.. suprised it hold up towing that rig, in EU our mowers would desintegrade after pulling just its own weight xD

[@russellcollier1599]

Definitely appreciate all the different types of content. K swap, diesel, even the Ev content. Do what you do.

[@timothydrouin1896]

I love when the boiz are mic'd up, im hard of hearing so its pretty awesome that i can hear you guys clear as day

[@orionfpv613]

Been watching a long time and there's one reoccurrence that I always appreciate and it's when y'all interact with the wildlife lol

[@accordinglyryan]

That little tractor puts in work LOL

[@FORDLYFAOTEAROA]

Such a Throwback to you visiting Wyatt at the diesel shop,snow all in the driveway and Wyatt still out there building people's trucks up for them. Pretty sure he had the Sketchy-DA KZbin channel back then ❤

[@Studefab]

Looks like we are in the same boat! GET AFTER IT!

[@dd801]

Man I like this 'pro' step. You two have become a big thing in KZbin land, and that's good. Yeah, you see the mic's, but still, take this further! You guys deserve this, Wyatt is so natural now. Take it up. It will work. Find the bigger shop, introduce the helping guys, make it a thing man. And still, keep the honda/tunerboy vibe. You guys are moving up, take it man!

[@michaellewis1475]

Also coming to the channel soon, mower repair! lol That Deere putting in some work.

[@DaveFromColorado]

I can't believe that was 3 years ago.... seems like just yesterday it happened! I have been watching this channel for way too long LOL but I will keep watching it.

[@hcgshuggy3023]

Hell yeah I’m building my 5.9 right now!

[@kennethfilmer3141]

Excited for this build series, Wyatt is sure enjoyable to watch on his craft

[@hardspaghetti9989]

So happy to see this thing getting some love, it's a huge part of the channel.

[@michaelbowen463]

I remember the flexplate dilemma.. What a mess. Good thing you had friends kinda local to the spot you broke down that could help you out.

[@issayz8648]

Cutting right to yall tuggin the Cummins with the lawn mower was so funny 😂

[@HChandler2010]

You need to do an episode on the lawn mower!! That thing is a friggin beast! 😂

[@kossmonaut]

you know its gonna be a big series when they bring out the good mics

[@driftvic3690]

Nice job with the microphones Boiz!! Hearing everyone has always been tough in the past

[@wescoupland3985]

Please take it to the drag strip I would subscribe to watch that and this Cummins build series.

[@DieselAddict-vs9fc]

Hell ya. I'm pumped for this build. My next truck will be a megacab