Music Kevin MacLeod: Airport Lounge - Disco Ultralounge - na licencji Creative Commons Attribution (creativecommon...) Źródło: incompetech.com... Wykonawca: incompetech.com/
Пікірлер: 21
@battistaverardi12404 жыл бұрын
This is the best shock ever made!! This fork is in a class of its own! Super plush and lightweight. All people need to do is research this fork and you will see!
@linusdalin14 жыл бұрын
It's a coil?
@battistaverardi12404 жыл бұрын
@@linusdalin1 yes coil on the left side. And you have three different coil springs to choose from according to your weight. Their is rebound control on the right also depends on the weight of oil you use. This shock is simple and incredible, all you need is rebound control and dampening control and never have to worry about adjusting air pressure. Absolutely nothing beats the plushness and smoothness of a coil spring. 10 years going strong and have never had a problem. Only changed the oil twice and it was perfectly clean. Even the foam rings inside are still spotless. Just get on and ride, this is truly a one of a kind shock.
@paulywogtheburnin8r3643 жыл бұрын
I own a 130mm model and it works well Planning to do this pretty soon cuz mine makes a loud topping out noise and leaks oil
@elliotthopkins81743 жыл бұрын
@@battistaverardi1240 So the suggestion it needs servicing every few rides is a myth? I'm contemplating servicing mine even though they work well. But I might not bother.
@battistaverardi12403 жыл бұрын
@@elliotthopkins8174 yes every few rides? That is ridiculous. This fork is bullet proof and amazing. All you need to do is after ever ride just spray down the stanchions with soapy water and clean where the rubber valves are with a small rag and then apply a small amount of fork oil on the stanchions and depress the fork to get the oil inside the fork. I have only replaced the oil on both sides twice in 10 years and each time I did the oil was perfectly clean and full. This is the best suspension fork ever!
@jdecris3 жыл бұрын
Thanks for posting. I recently disassembled the preload component that sits on the top of the spring, and now I can't seem to get the top cap bolt to thread back on. Do you have any tips for this? Should I look for a longer bolt or should some loctite hold the bolt in place? Thanks.
@ralphramos77903 жыл бұрын
How much fork was used for each side
@mikeynaziri4 жыл бұрын
links for seals and oil?
@paulywogtheburnin8r3643 жыл бұрын
Yes please
@blerpahuitelnak3 жыл бұрын
from what year is this fork?
@kevinrook59903 жыл бұрын
What oil should be used
@peterzachar16893 жыл бұрын
10wt. Red
@artistunter70982 ай бұрын
7,5W. Manual for help
@bradbeckham19933 жыл бұрын
I just lost that ball and spring you remove at 6:35. Any idea what it’s called?